2 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Dust collector for mould cleaning |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Xplorer4 anemometro |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Digital precision scale up to 2000 g |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
3 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Baseplate servo |
1 x | Oils Pumps Empty (1 liter) |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
2 x | Vasa model Catapult |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | SE Ring 200 mm (2 pcs) |
2 x | SE Ring 360 mm (2 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | |
2 x | Tape GFK 25 mm |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
3 x | Foil for sticking flaps and ailerons |
1 x | Round Rod 1,25x1000 mm |
1 x | Flap hinge (6 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | 18 mm reinforced hinge |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | Gates hinge aluminium (1 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
3 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Universal Colour Paste deep black 250 g |
1 x | Ply-Span 450x600/13g White |
1 x | Oratex Natural White 2m |
2 x | Oratex White 2m |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | DYNAMOMETER S-1580 |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Carburator Moki S400 |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | F3A carbon 95 mm spinner |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Fuel tank 1500ml (50oz) |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Extension Arm for Carburetor (red) |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | 550 cc gasoline fuel tank complet |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
2 x | DLE Ignition unit |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | Motor OS 3820-1200 electric |
1 x | Crystal Universal RX 35.150 Ch 75 |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | "Taxi Tank" Fuel Tank |
1 x | O-Ring SAITO FG-90 R3 |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | O-ring Saito FG-73 5cyl |
2 x | Long pinned hinge (6 uds) |
1 x | Cut tube |
1 x | Copier 2x20 cm pcs |
3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Straightened threaded rod M3 - 1m |
2 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Gates hinge |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Straightened threaded rod M2-1m |
2 x | Bungee HLG Premium |
1 x | Spikes Band (5 m) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
2 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | SE Ring 400 mm (2 pcs) |
3 x | Marker ties (20 pcs) |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Round Rod 2,0x1000 mm |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
2 x | Suction funnel for carburetor 90D-M (red) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | Cinta Goldfix 1m |
1 x | Reed valve for DA 50-R |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Ball Bearings for motor A60-V2 |
2 x | SAITO FG-36 carburetor |
1 x | Tape GFK 38 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Miniature brass strap hinge, 1 m |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Propadapter for motor A60-V2 |
1 x | Compact on-board starting system (9525) |
1 x | Propeller Pleg CAM Carbon 11x5 |
2 x | Propeller Pleg CAM Carbon 13x5 |
3 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | Propeller diller 5/6,3/8/9 |
1 x | 1/12 Pilot "Fighter" |
2 x | Propeller Pleg CAM Carbon 14x9 |
2 x | Propeller Pleg CAM Carbon 12.5x9 |
2 x | 9x4.7 * 22x12 carbon propeller |
1 x | Combo RAY C3542-1000 + ESC 60A |
1 x | Charger LiPo Charger4 |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | 1/6 Pilot "Cindy" |
1 x | MAX pilot ARTF |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Pendulum glow tank |
1 x | 1/10 Pilot "Jimmy" |
1 x | Parachute BACKUP X100 |
1 x | Bags wings/rudder ASPIRE |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | OS 37 SZ-H, Connecting rod |
2 x | Vacuum pump 12 CFM |
1 x | Parachute XTRALITE S |
1 x | Porex gasoline filter |
1 x | Carbon blade 3D 230 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | 20 mm carbon horn |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Charger 220/110v |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Blind nut M8 (10 pcs) |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | Selfstart electronic switch |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Set propellers 8x4.5 SF Carbon Multicopter (1x R - 1x L) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Cabel "Y" 15 cm |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | Small adjustable control horn with bearing |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Fuel Station 30L |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Motor OS 50 SX-Hyper |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Motor OS MAX 65 AX (incl. muffler) |
1 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
1 x | Medium pin type hinge (12 uds) |
1 x | OS Engine 105HZ-R Heli |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | OS Engine 105HZ-R Heli with pipe 105 |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | 3,2 mm Prop Adapter M5 |
1 x | 6 mm Prop Adapter M8 |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Tubo Teflon Ø25 mm x 10cm |
1 x | 2 mm Prop Adapter M5 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Tray for FUTABA 18 SZ |
1 x | Adapter 5,0 mm M8 |
1 x | Xplorer2 anemometro |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Z Bender - S Type Tool |
1 x | Adapter 3,2 mm M8 |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Oracover CHROME 2m |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Ciano KAVAN Thin 20g |
1 x | KAVAN Hand crank fuel pump |
1 x | Kavan Car 25% nitro 1l |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Planetary gearbox(3,8:1) |
1 x | STD excentric gearbox for 2,3mm axis (3,5:1) |
1 x | STD excentric gearbox for 2,3mm axis (2,33:1) |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Excentric gearbox for 3,2mm axis (4,1:1) |
1 x | Oracover Yellow CUB 10 m |
1 x | Oracover ROYAL RED 2m |
1 x | Socket head ball link M3 (2 uds) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Astra wing Joinner (Top Model) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Bidule 55 2460 mm Cabina |
1 x | Ring 320 mm length (5 pcs) |
1 x | Tape GFK 50 mm |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Propeller Pleg CAM Carbon 12x10 |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Propeller Pleg CAM Carbon 15x13 |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | Propeller Pleg CAM Carbon 10x7 |
1 x | FIALA Propeller 24x8 |
1 x | Propeller MEJLIK 18x8 CFK |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Propeller APC 12x10 Glow/Gas |
1 x | Propeller MEJLIK 26x12 N-3 Blades |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Propeller MEJLIK 32x12 EVO |
1 x | Propeller MEJLIK 23x8 CFK |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Propeller MASTER 7x3 |
1 x | 18x8 BIELA propeller |
1 x | Oracover Black 10 m |
2 x | Propeller Pleg CAM Carbon 11x6 |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | FIALA Propeller 16x6 |
1 x | FIALA Propeller 20x8 |
1 x | FIALA Propeller 25x10 |
1 x | Propeller APC 16x6 Glow/Gas |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | Propeller APC 15x8 Glow/Gas |
1 x | 24x10 4Bl Scale |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
2 x | Propeller Pleg CAM Carbon 10x8 |
1 x | FOXY G2 C3530-700 |
1 x | Propeller Pleg CAM Carbon 10x5 |
1 x | Propeller Pleg CAM Carbon 12x11 |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Propeller Pleg CAM Carbon 13x10 |
1 x | Propeller Pleg CAM Carbon 10x12 |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | Propeller Pleg CAM Carbon 14x10 |
1 x | Propeller Pleg CAM Carbon 12x8 |
1 x | Propeller Pleg CAM Carbon 16x10 |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | Propeller Pleg CAM Carbon 11x7 |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | FIALA Propeller 27x10 |
1 x | FIALA Propeller 18x10 |
1 x | FIALA Propeller 23x8 |
1 x | FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Propeller MEJLIK 28.5x12 S-3 Blades |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | Propeller APC 10x6 Glow/Gas |
1 x | Vess propeller 13x6 S |
1 x | Propeller MEJLIK 21x8 CFK |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | Propeller VESS 27A |
1 x | Propeller MEJLIK 20x13 N-3 Blades |
1 x | Propeller APC 8x4 Glow/Gas |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | Propeller APC 10x7 Glow/Gas |
1 x | Vess propeller 11x7 S |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | Propeller APC 10x4 Glow/Gas |
1 x | Propeller MASTER 7x5 |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller POWER-PROP 14x8 |
1 x | 18x6 BIELA propeller |
1 x | 19x10 BIELA propeller (3-blades) |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | 26x18 BIELA propeller |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
|
19,105.84EUR |