2 x | Plastic caps for AIR BURTS (30 pcs) |
2 x | White smoke bombs AX-60 (5 pcs) |
1 x | Canopy Latch |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Blue silicone 0,5 qmm wire (50 m) |
2 x | Yellow smoke canister 65 g |
1 x | Ferrita con funda |
1 x | L-Connector 1.5 mm x 1000 mm |
2 x | Horn 20x28,5 mm (2 pcs) |
2 x | ABS tube 8.0x6.0x1000 mm |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
3 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
2 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Surface Indicator Gauge Small |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | Shirt Hispano Aviación |
1 x | Truck-trailer for gliders 720 x 239 mm |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | ABS tube 4.0x3.0x1000 mm |
2 x | AX-60 starters (5 pcs) |
3 x | ABS angle 1.5x1.5x1000 mm |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | ABS angle 2,0x2,0x1000 mm |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | Medidor ángulos y/o incidencias |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
2 x | Small aluminium horn gold (2pcs) |
1 x | Flap hinge (6 pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
4 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
3 x | 90 mm rods + T patellas set for direction control |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
3 x | Beech dowels 2.0 x 1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Long pinned hinge (6 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
2 x | ABS angle 3,0x3,0x1000 mm |
2 x | ABS tube 20.0x18.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Angle of incidence meter |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Softshell Hispano Aviación |
3 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | 15 mm reinforced hinge |
3 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | 80 mm rods set for direction control |
2 x | 2 mm male connector (2 pcs) with safety connector |
2 x | 6 mm red aluminium threaded horn with patella |
3 x | Blue smoke canister 140 g |
2 x | White smoke bombs AX-3 (10 pcs) |
2 x | Pin hinge 26x11 mm (10 uds) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Propeller balancer |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | ABS angle 6,0x6,0x1000 mm |
3 x | Blue smoke canister 100 g |
2 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
3 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
3 x | XT-30 connector (pair) |
2 x | ABS tube 3.0x2.0x1000 mm |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | 100 mm rods set for direction control |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Conector BEC male (10 pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | ABS angle 5,0x5,0x1000 mm |
3 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Connectors banna oro 3,5 mm (M/F) |
2 x | B4-0 rocket charges (6 pcs) |
3 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | Profile ABS half cane 7.0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Profile ABS half cane 3x1000 mm |
3 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
4 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | 6 mm Quick clamp_S (10 pcs) |
3 x | SlowFlyer control horn (3 pcs) |
1 x | ABS tube 4.0x2.0x1000 mm |
2 x | XH female balance (2S) connector (2 pcs) |
1 x | 18 mm reinforced hinge |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
3 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
2 x | Profile ABS Square 3 x 1000 mm |
1 x | "S" set for boats |
1 x | Gold antispark 5,5 mm plug |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 19 mm 2:1 black termoretract tube |
2 x | Threaded coupler M3 (10 uds) |
3 x | Micro flex hinge (12 uds) |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | Z type of cable coupler Ø 2 (2 uds) |
4 x | Protective Cover for wires Ø 20 mm 1000 mm |
2 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
3 x | Profile ABS half cane 5.0x1000 mm |
4 x | Profile ABS half cane 8.0x1000 mm |
3 x | Red smoke canister 65 g |
4 x | Pine wood slat 10x10x1000 mm |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Protective Cover for wires Ø 15 mm 1000 mm |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | White large kwik link (10 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Propeller MENZ-S 19x10 |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | 12x6 tree blades propeller |
3 x | PVC red battery termo-retract 68 mm (10 m) |
2 x | XH male balance (2S) connector (2 pcs) |
1 x | BlueCom™ Adapter (iOS) |
2 x | Propeller MENZ-S 15x12 |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | PowerBox iGyro SRS |
1 x | Red 4 mm connector holder |
3 x | Horn 13,5x16 mm (2 pcs) |
2 x | Brass control horn M4 short for wire (4 pcs) |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
3 x | Propeller MASTER 6x3,5 |
1 x | Propeller MASTER 5,5x4,5 |
2 x | XH male balance (4S) connector (2 pcs) |
1 x | Propeller MENZ-S 18x10 3-Blades |
2 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | Silicone black 1,0 qmm wire ( 1 m) |
2 x | PowerBox Voltage Regulator (linear) |
3 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
8 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Landing gear strap medium (4 uds) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Xplorer2 anemometro |
2 x | White gelcoat 1 Kg |
1 x | Propeller balancer |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Hardener Aero EPH 161 (500 g) |
3 x | XH male balance (5S) connector (2 pcs) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
4 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
3 x | 3-blades 20x12 carbon prop Super Silence |
1 x | Ferrita 14x8x5.5 mm |
2 x | Small aluminium horn red (2pcs) |
1 x | 3l Smoke oil |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Profile ABS half cane 2.5x1000 mm |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Propeller MENZ-S 16x6 |
2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
2 x | Yellow smoke canister 140 g |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
3 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | 8x6 tree blades propeller |
2 x | Profile ABS half cane 6.0x1000 mm |
1 x | Parachutist |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | Quick hose connector 3-3 mm |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Propeller MENZ-S 21x10 |
2 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
2 x | Connector CAN 15 |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
2 x | Cable Cargador FUTABA |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
5 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | POWERBOX Magic Jeti Switch |
2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Propeller MENZ-S 17x8 |
2 x | Horn with ball 40x30 |
1 x | Silicone black 0,5 qmm wire ( 25 m) |
2 x | Cable control set |
2 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
2 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
4 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
4 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Propeller MENZ-S 18x10 |
3 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
3 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
2 x | Oracover Azul Cielo 2 m |
3 x | 5 line servos wire black (1 m) |
1 x | Silicone red 2,5 qmm wire ( 1 m) |
3 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Propeller MENZ-S 21x8 |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | Smoke pump RCEXL |
2 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | MPX Sub-D Adaptor |
3 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Control horn long w/ball |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
2 x | Blade Holder Full (3 blades) |
3 x | Small pinned hinge (12 uds) |
2 x | Brass ball links BS M3 V1 (10 pcs) |
3 x | White silicone 0,25 qmm wire (150 m) |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Oracover Yellow CADMIO 10 m |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
4 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Micro control horn T2 Ø 1 |
3 x | Fail Safe air retract |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
3 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Propeller MENZ-S 18x12 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
4 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
3 x | Profile ABS triangular 6.0x1000 mm 90º |
2 x | Prolongador S-Bus JR/JR 10cm |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | UHU hart 35 g |
2 x | Tacometer mini ignition RCEXL |
2 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Nylon threaded block M4 (2 uds) |
2 x | Turnbuckle M1,6x17/27 (2pcs) |
3 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
3 x | Silicone black 0,75 qmm cable ( 1 m) |
1 x | Xplorer3 anemometro |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | XH female balance (5S) connector (2 pcs) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Straightened threaded rod M3 - 1m |
2 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Silicone black 1,0 qmm wire (100 m) |
3 x | Propeller MENZ-S 17x10 |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
4 x | Green smoke canister 140 g |
2 x | Green smoke canister 65 g |
2 x | Wire easy tensioner (silver) |
1 x | Propeller POWER-PROP 11x9 |
1 x | Connectors MPX male (PIN double) |
2 x | White silicone 0,25 mm² wire (25 m) |
3 x | Field folding model stand SebArt |
2 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Parachute expulsion foam |
2 x | XT-60 connector (male) |
3 x | PowerBox Smokepump JETs 2x outside |
1 x | Propeller MENZ-S 18x8 |
2 x | Connectors MPX male |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
3 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Cable video GoPro and 5V cable |
1 x | Conector Servo female 4 pines |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Steering arm 16 mm Ø 4 mm |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Silicone red 0,5 qmm wire ( 25 m) |
1 x | Rotorshape Autogyro |
2 x | White smoke canister 100 g |
2 x | Horn 6/20 with M3 Bearing |
1 x | Optotronix Aurora Plug |
2 x | 4,8x1000 mm 2:1 red termoretract tube |
2 x | 6,4x1000 mm 2:1 green termoretract tube |
3 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
2 x | Kwik link with arm M3xM2xL24 |
2 x | Pulley brass 4/1,5 (2 pcs) |
1 x | 15x7 tree blades propeller |
2 x | Hitec 46 mm servo arm with ball link |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | resin-hardener L-385 H-385 (1250 g) |
2 x | Horn 5/15 with M2 Bearing |
1 x | XT-90 connector (pair) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | JM electric Pump |
1 x | SUS wire 3m (nylon coated) |
1 x | Quick hose connector 3-3 mm |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Ply-Span 450x600/13g Orange |
1 x | 300 Newtons FEMA absorber |
2 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
2 x | wire tensioner (blue) |
1 x | TX 250 mW especial GOPRO |
2 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
1 x | Propeller diller for EME35 and DLE35 |
2 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Cable video GoPro |
1 x | Dual Sequencer Gear and Canopy |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | PCARD Wireless System |
2 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
2 x | Hose clips 6 mm |
1 x | Cockpit aluminium closing 5.4g |
1 x | Horn DUBRO 1/2A |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Propeller MENZ-S 16x10 |
1 x | Motor DLE 40 cc Twin |
2 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
3 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
4 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | White smoke canister 140 g |
1 x | Short adjustable control horn 3x24 |
3 x | Threaded coupler M2,5 (10 pcs) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
2 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Faucet FESTO |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | SIG Coverall 1.2x0.9 m |
1 x | XH male balance (7S) connector (2 pcs) |
3 x | ABS tube 3.0x1.0x1000 mm |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
1 x | Brake for 140 mm wheels |
2 x | Remote electric ignition system |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
2 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
2 x | Propeller POWER-PROP 16x10 |
2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Micro clevis (10 uds) |
2 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Autogyro Cierva C30 Spain |
2 x | Blocking screws M6 gas engine |
2 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | MYLAR film A350 (1000x500 mm) |
2 x | Red smoke bombs AX-60 (5 pcs) |
2 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Futaba 38 mm servo arm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | Compact on-board starting system (9525) |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
2 x | Gates hinge |
1 x | Initior Transmitter FTX2 Wireless |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
2 x | Propeller POWER-PROP 11x8 |
1 x | Servo TOPMODEL S7520 MG |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Propeller electric carbon 9.5x7 |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | Propeller MENZ-S 34x12 |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Motor DLE 170 cc Twin |
3 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Ventral support for AX-18/AX-60 |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Smoke set "S" |
1 x | 40 mm air cylinder |
4 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Black large kwik link (10 pcs) |
1 x | Propeller MASTER 5,5x4 |
1 x | Charger 220/110v |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Connectors banna oro 2 mm (M/F) |
2 x | ABS tube 16.0x14.0x1000 mm |
1 x | Pulley brass 2,5/1 (2 pcs) |
2 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
4 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Propeller MENZ-S 24x8 |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | Hitec 30 mm servo rounded arm |
3 x | XT-60 connector (female) |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
3 x | Threaded coupler M2 (10 pcs) |
2 x | Porta Kwik link M4 3 mm (2 pcs) |
2 x | PVC transparent battery termo-retract 70 mm (10 m) |
3 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Propeller POWER-PROP 14x12 |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
2 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | 6,4x1000 mm 2:1 black termoretract tube |
2 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Indoor hinge with servo arm integraded |
1 x | 30 cm MULTIPLEX female connector |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Power Box GPS Sensor III |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | SIG Coverall 1.2x4.5 m |
2 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Propeller POWER-PROP 15x10 |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Ball Bearings for motor A60-V2 |
3 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
2 x | Threaded coupler M2 (10 uds) |
2 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | bavarianDEMON USB cable |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | wire tensioner (red) |
2 x | PowerBox Champion SRS |
1 x | PowerBox Spare part magnetic sensor |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | |
2 x | Xplorer4 anemometro |
2 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Racor 4/3 mm |
1 x | Green smoke canister 100 g |
3 x | Cable coupler M2,5 (2 pcs) |
2 x | Electric rocket starters (6 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | 9x4.7 * 22x12 carbon propeller |
2 x | 4 mm M3 red control terminal (4 pcs) |
2 x | Smoke set "M" |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Propeller MENZ-S 20x8 |
4 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Propeller electric carbon 6x5 |
2 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
4 x | 10 mm Quick clamp_L (6 pcs) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Propeller MENZ-S 20x10 |
1 x | Extension silicon 50 cm (Futaba) |
1 x | GROB G109 Elektro 2.770 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | Connectors MPX black male |
1 x | 140 mm rods set for direction control |
1 x | Propeller MENZ-S 22x8 3-Blades |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Axle for AXI 4120/xx motors |
1 x | Motor DLE 60 cc Twin |
1 x | PT 16x10 E Propeller |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
2 x | Profile ABS Square 1 x 1000 mm |
2 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Propeller MENZ-S 26x12 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Pitts Muffler kit for CAP 21 |
1 x | Cable coupler M2 (10 uds) |
1 x | Propeller MENZ-S 34x14 |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Nylon threaded block M6 (2 uds) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
2 x | Allen wheel collar M4x4 |
2 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Propeller MENZ-S 16x12 |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Propeller MENZ-S 15x8 |
1 x | SIG Coverall 1.2x1.8 m |
1 x | L ELBOW 90º ø 25 mm |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Propeller POWER-PROP 14x8 |
1 x | DC-3 Douglas (White/Blue) 1800 mm |
1 x | Racor "Y" 3 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Round Rod 1,5x1000 mm |
2 x | Couple M4 for wire (10 pcs) |
1 x | Sparkplug NGK CM6 |
2 x | Propeller MENZ-S 20x9 |
1 x | Profile ABS Square 2 x 1000 mm |
2 x | PVC 0,08 qmm Futaba servos wire (5 m) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
2 x | Silicone red 1,5 qmm wire ( 1 m) |
1 x | 50 mm servo arm with bearing (2 pcs) |
2 x | Winter Glove for DC |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | LA500 Autogyro |
1 x | Receiver RFA05 5Ch compatible FUTABA |
2 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Propeller MENZ-S 18x6 |
3 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Propeller POWER-PROP 13x8 |
2 x | FOAM - CURE™ (24g) |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Propeller Pleg CAM Carbon 11x10 |
2 x | Balsa panel 1.5x100x1000 mm |
1 x | Nut M2 |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Ply-Span 450x600/13g Black |
1 x | Strip 1,5x1,5x330 mm |
1 x | ABS tube 5.0x4.0x156 mm |
3 x | BALSA trip 4.0x4.0x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Motor DLE 55 RA |
1 x | Spark motor OS Type F |
1 x | CORTEX |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Racor 4/6 mm |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Extra long horn 60x30 |
1 x | T-Hose connector 3-3-3 mm |
2 x | ABS tube 12.0x10.0x1000 mm |
2 x | 11 mm wing servo holder |
1 x | Racor 3/3 mm |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Propeller MENZ-S 30x10 |
1 x | Canister combo DLE 55 cc |
1 x | 38x4,5 mm wires output (2 pcs) |
2 x | Adapter rotula M3 |
2 x | Horn with ball 55x40 |
2 x | Pulley brass 10/2 (2 pcs) |
1 x | Horizontal servo holder |
1 x | Neck strap JETI DS |
1 x | Skyray (RBC Kits) |
1 x | XH male balance (6S) connector (2 pcs) |
3 x | Medium pin type hinge (12 uds) |
1 x | MPX-Dean "T" Adapter |
1 x | Blade Holder Full (4 blades) |
1 x | Air pressure gauge |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Xplorer1 anemometro |
2 x | PowerBox Battery 4000 |
2 x | 3-blades 24x12 carbon prop Super Silence |
1 x | DUPLEX R6 EX receiver 2,4GHz |
2 x | Horn 5/10 with M2 Bearing |
1 x | Kerostarter K30G |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Axle for AXI 2212/xx motors |
1 x | Futaba Female 40 cm extension |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | PowerBox Competition |
2 x | Window mounting channel 5m |
2 x | Allen wheel collar M3x5 |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
2 x | Wheel FEMA 165 mm / 8 mm |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Snap for floding prop for 2 mm axi |
1 x | 3 blades set |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Horn mando small (2 pcs) |
1 x | Propeller Pleg CAM Carbon 16x10 |
1 x | QUANTUM II 55 Brushless Motor |
3 x | Balsa panel 4.0x100x1000 mm |
3 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Porex gasoline filter |
1 x | Cable coupler M2 (10 uds) |
2 x | Electric Fuel Pump 12V |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Covered closure or fairings |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Propeller MENZ-S 20x6 |
1 x | PowerBox iGyro 1e |
1 x | Kwik link AL M4 con Clip (2 pcs) |
3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | BALSA triangular 10x10x1000 mm |
3 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Extension Ø25mm x L: 60 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | Oracover Yellow CADMIO 2 m |
2 x | Balsa panel 1.0x100x1000 mm |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
2 x | Angled clevis with threaded rod M3 |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | JETImodel Addcap 820 |
1 x | Motor DLE 30 cc V2 |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Charging Extension 50cm for 2 Battery |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Futaba 54 mm servo arm with ball link |
1 x | SPARK Switch 7.4v |
1 x | Sparkplug ROSSI R8 |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Dean "T" - Futaba Adapter |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Tail tube RAINBOW |
2 x | ORACOVER transparent Yellow (10 m) |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Propeller POWER-PROP 11x6 |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Propeller electric carbon 6.5x4 |
1 x | ASK 21 6.5m + pylona |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | switch long 3-position DS Tx DUPLEX 2,4EX |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Air Intake manifold 90° - Large |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
3 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | Micro control horn (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Propeller MENZ-S 23x10 |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Receiver R6008HV-A comatible FUTABA |
1 x | Horn 6/35 with M3 Bearing |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Solarfilm Lite blue transp. 5m |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Oracover Red 2 m |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | External LED's (2 pcs) |
1 x | Silicone black 1,0 qmm wire ( 25 m) |
1 x | Filler Gauges |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | PowerBox Evo |
1 x | Motor A30-10 XL V4 |
1 x | Long pinned hinge (12 uds) |
2 x | Conector JR Servo male (10 pcs) |
1 x | Tray for FUTABA 14SG/16SZ |
1 x | Oracover Azul 2 m |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Extension for SensorSwitch 30cm |
2 x | Switch Cap M (black) |
2 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Piston ring for motor 58/116 cc |
1 x | Propeller MENZ-S 19x12 |
1 x | Wire easy tensioner (red) |
1 x | Small kwik link (10 pcs) |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
4 x | Beech dowels 3.0 x 1000 mm |
1 x | Allen wheel collar M3x3 |
1 x | Oracover Yellow CUB 2 m |
1 x | Rear bearing for motor 35/40 cc |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
4 x | Balsa panel 5.0x100x1000 mm |
1 x | DEMON CORTEXpro |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Axle for AXI 2814/xx motors |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Ply-Span 450x600/13g Red |
1 x | Long adjustable control horn 3x34 |
1 x | Central piece 52 mm 0º |
3 x | EME 55 cc carburetor WALBRO |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | SPARK Switch 5.9v |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | 22x10 BIELA pusher propeller |
1 x | Propeller Pleg CAM Carbon 16x8 |
1 x | Landing gear strap large (4 uds) |
2 x | 22x10 BIELA propeller |
1 x | SPARK Switch 12v |
1 x | Propeller electric carbon 7x7 |
1 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
5 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | 26x12 prop Super Silence |
3 x | BALSA triangular 15x15x1000 mm |
1 x | PowerBox MAG Sensor |
1 x | Vertical servo holder |
2 x | 3-blades 29x12 carbon prop Super Silence |
1 x | Propeller MENZ-S 30x12 |
1 x | Propeller MENZ-S 27x10 |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | 24x10 prop Super Silence |
2 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Steering lever |
2 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Prop Saver for AXI 22xx/xx |
1 x | Axle for AXI 5325/xx motors |
1 x | wire tensioner (silver) |
1 x | Motor A30-14 L V4 |
1 x | Silicone black 4,0 qmm wire (25 m) |
2 x | Switch moment button, 2 functions, long FUTABA |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Motor B50 19 S & 6.7:1 gearbox |
1 x | Rubber profile 6-2 mm 2M |
1 x | Quick hose connector 4-4 mm |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Mudguard wheels 112/127 mm |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | 26x8 BIELA propeller |
2 x | 46 mm Futaba servo arm tandem with ball link |
2 x | 24x12 prop Super Silence |
1 x | Fiberglass motor-holder for electric motors |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Propeller MENZ-S 16x8 |
1 x | 28x10 BIELA propeller |
1 x | Central piece 42 mm 0º [12 mm] |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | Head upper part |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Carburetor DLE 30 |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | PowerBox MagSensor red connector |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | EnLink 2RS Plus - DUO |
1 x | "M" set |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Round flex hinge (12 uds) |
1 x | Steering arm 16 mm Ø 3 mm |
2 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | 4 LiPo XH>EH adapter |
1 x | Futaba 20 mm servo arm |
1 x | PowerBox PROFESSIONAL |
1 x | Allen wheel collar M4x6 |
1 x | Red smoke canister 140 g |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Motor DLE 55 cc |
1 x | Variable Flow Smoke Pump System |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Propeller MASTER 7x4 |
1 x | Metal ring front FEMA |
1 x | Bidule 55 V3 2460 mm |
1 x | Motor holder AXI |
1 x | Cooler motor type 150 |
1 x | Motor A20-20 L EVO |
1 x | Propadapter for motor A60-V2 |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Propeller Pleg CAM Carbon 18x9 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
5 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | A/C quality beech plywood 600x300x5.0 mm |
3 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
2 x | Birch plywood plate 600x300x4.0 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Towing hook <3m |
1 x | Birch plywood plate 600x300x2.5 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Fixed launching hook |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Towing hook |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Premium servo extension 100cm |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Starter 12v (Max 180 and 30ccm) |
3 x | BALSA triangular 6x6x1000 mm |
1 x | LOWER TOW HOOK |
1 x | Tow hook for tug |
1 x | Maleta transporte FUTABA 10PX |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
2 x | Switch Cap L (black) |
2 x | Switch Cap M (red) |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Power supply NT 40 Amp. |
1 x | LOGO 600 SX (kit) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Logo 400 SE VBar |
3 x | Adjustable launching hook |
2 x | Towing hook |
2 x | PT 22x10 EL Propeller |
2 x | LA500 housing-upper cyclic |
2 x | LA500 front gear holder |
1 x | PT 20x13 EL Propeller |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | double Fuel Dot V2 (silver) |
2 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Spark plug key NGK MVVS |
2 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Sparkplug 1/4-32 Glow |
1 x | Aluminium ignition bad (red) |
1 x | Recess mount-rem. glow plug set |
2 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | DLE 55 carburetor |
2 x | Black "FUEL VENT" round aluminum overflow socket |
3 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | DLE 55 Muffler |
1 x | DLE 111 pipe plug |
1 x | Canister combo DLE 120 cc |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | CENTRAL PROPELLER BOLT FOR DLE85/111/120 |
1 x | Gasket set DLE-55RA |
1 x | Gasket set DLE-120 |
1 x | Escape DLE-60 Dcha |
1 x | DLE 85 Ignition unit |
2 x | Battery RX JETI LiIon RB 3100 7.2v |
3 x | Battery RX JETI LiIon RB 6200 7.2v |
2 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
2 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | PowerPack 2.5X2 PRO |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
1 x | DSM 10 Dual Switch Mixer |
1 x | Pendulun "Special" to tank 60g |
1 x | Transmitter Balancer Futaba V |
1 x | Fod Guard 67x32 mm |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Switch Cap M (blue) |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Caps multicolor Switch JETI |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | LA500 rotor head core |
1 x | Piñon motor rotor LA-500 |
1 x | Restrictor FESTO 3/3 mm |
2 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | Tube mounting clips (5 pcs) |
1 x | Switch Cap L (Blue) |
1 x | FOD Screen K45/60/70/85 |
1 x | Telemetry JETI |
1 x | Jet Pipe 160N-250N (120/130 mm) |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | FPV Station for SE TX-Tray V1 |
1 x | Antenna holder bracket double |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | Decorative caps, multicoloured, short |
1 x | Tail boom brace LOGO 480 |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | LA500 tail empennage |
1 x | LA500 pilot-seat set |
1 x | LA500 cyclic central part |
1 x | LA500 nose |
1 x | LA500 pre-rotation gear hub |
1 x | LA500 ciclic lever |
1 x | Xoar Electric Beechwood Prop 16x7 |
1 x | Xoar Electric Beechwood Prop 20x10 |
2 x | |
1 x | Superlight standard wheel 100 mm (2 pcs) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1 |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | 6 mm aluminium horn with patella |
1 x | Horn 6/27 with M3 Bearing |
1 x | Fuel dot V3 (Red) |
2 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
2 x | Bob airtrap set |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | diameter silicone tube for glow |
1 x | Electron 22 mm Fitting barb |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Check valve V2 |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | "Taxi Tank" Fuel Tank |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Deposito DUBRO 360 ml - 12 oz |
1 x | 500 ccm gasoline fuel tank |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Horn 5/20 with M2 Bearing |
1 x | Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | 550 cc gasoline fuel tank complet |
1 x | 700 ml complete glow fuel tank |
1 x | Deposito DUBRO 3000cc-100oz |
1 x | Air Trap Mounting - 175ml |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | Reed valve for DA 50-R |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | 1000 ccm gasoline fuel tank |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
2 x | 280 cc gasoline fuel tank complet |
1 x | 18m Fitting barb |
1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
1 x | Blue "FUEL VENT" round aluminum overflow socket |
1 x | Fod Guard 73x32 mm |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Tape GFK 50 mm |
1 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Epoxy 10 min 190g |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Epoxy 5 min. 200g |
1 x | M3 Maxi ball link (2 uds) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Cable with accesories |
1 x | RH long aluminium horn (2pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | 20 mm carbon horn |
|
46,442.49EUR |