1 x | Altimeter Altis NAO |
2 x | Horn for flap control (1 pcs) |
2 x | Ball link M3 (6 uds) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | Fascination 3600 mm ARC |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | MPX Sub-D Adaptor |
1 x | Small aluminium horn blue (2pcs) |
2 x | Extension silicon 75 cm (Graupner) |
2 x | Silicone black 0,5 qmm wire ( 1 m) |
2 x | Albatros ,spare fuselage (Top Model) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Ball link M3 RPA's-UAV's |
2 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
3 x | X-RAY Micro QR (Elevator) |
1 x | Fox MDM 1 6000 mm |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | Futaba Female 40 cm extension |
2 x | Para-RC Trike "RC-Bullix" |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
4 x | Gracia (Top Model) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | 1/6 Pilot "Cindy" |
3 x | Surface Indicator Gauge Small |
2 x | Aero-Master (Aero-naut) |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Swift S1 De-luxe 3.140 mm |
1 x | Oracover Green10 m |
1 x | Short ball link M3 (6 uds) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Cable Cargador FUTABA |
1 x | MYSTIQUE 2.9 m ARF |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | Flat washer 2.2 mm (20 pcs) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
2 x | Socket head ball link M3 (2 uds) |
1 x | Gracia Maxi ARF, bags (Top Model) |
1 x | Fournier RF-4D |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
1 x | Short ball link M1.6 (6 uds) |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | 18m Fitting barb |
1 x | XH female balance (3S) connector (2 pcs) |
3 x | Truck-trailer for gliders 720 x 285 mm |
1 x | GRAFAS MAXI ARF |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
2 x | CF tube set (Ø 38 mm y Ø 14 mm) |
2 x | Navaho new design (Top Model) |
1 x | Fascination 3600 mm, Canopy (Top Model) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Cable control set |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Field folding model stand SebArt |
1 x | Ball link M3 (10 pcs) |
1 x | Ion Pro, Elevator (JP Model) |
2 x | Flat washer 4.3 mm (20 pcs) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Tray JETI for DS-14/16/24 Black |
2 x | Glider KNIRPS |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Field folding model stand |
1 x | Windsock Ozone L -1200 mm |
2 x | LO 100 ARC 3.3m,cabina |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Cable with accesories |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | 1/6 Pilot "Garry" |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | 6 mm aluminium horn with patella |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
3 x | Vasa model Catapult |
1 x | Horn with ball 40x30 |
1 x | Socket head long ball link M3 (6 uds) |
3 x | USB interface ALTIS |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
3 x | Astra (Top Model) |
1 x | Connectors banna oro 2 mm (M/F) |
3 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | SATORI 2 PRO V C64 F5J |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
2 x | Horn 6/35 with M3 Bearing |
1 x | Flat washer 3.2 mm (20 pcs) |
2 x | Canopy Astra |
1 x | 1/4 Pilot "Mike" |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Pilot "Goose" (Slimline) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | M2 5Diam black ball link V2 (2 pcs) |
3 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | LO 100 ARC 3.3m |
2 x | Conector BEC male (10 pcs) |
2 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | ABS tube 3.0x2.0x330 mm |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | Ion Pro, Fuselage (JP Model) |
3 x | Extension silicon 10 cm (Graupner) |
2 x | Horn 6/27 with M3 Bearing |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
2 x | Ball link M2 (10 pcs) |
1 x | Joint with bearing M2 22x5,5 |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
2 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Lock washer 3.2 mm (20 pcs) |
3 x | DPS Switch JR/JR |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Medidor ángulos y/o incidencias |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Short adjustable control horn 3x24 |
1 x | 1/7 Pilot "Japanese" |
1 x | Propeller balancer |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | Fox MDM 1 4000 mm Std. |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
2 x | ABS tube 5.0x4.0x1000 mm |
3 x | E-FUN BUG (ROI-Import) |
1 x | BIG MOSNTER |
2 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Keypad ALTIS V4 |
1 x | Telemetry interface ALTIS 20 cm |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Poerfly |
2 x | Ball link M3 (10 pcs, flat ball) |
2 x | XT-90 connector (pair) |
1 x | Neck strap JETI DS |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | Connector Sub-D 2+5 Female |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Connectors DEANS (T) |
1 x | Albatros red/white (Top Model) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
2 x | Extension silicon 50 cm (Futaba) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Futaba 46 mm servo arm with ball link |
2 x | Swift 5050 mm (Airwold) |
2 x | Festo 6mm Tubing Holder (10 uds) |
1 x | 33,0 mm propeller (left propeller) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Fail Safe air retract |
1 x | Lock nut M6 (10 pcs) |
2 x | CC 11 Conector |
2 x | Small control horn with bearing (2 pcs) |
1 x | CC 03 |
1 x | Hitec 52 mm servo arm |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Screw M4x30 (10 pcs) |
3 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
3 x | Angled clevis with threaded rod M3 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Socket Head Screw M2x10 |
3 x | Nylon threaded block M4 (2 uds) |
2 x | LO 100 ARC 3.3m,frame canopy |
2 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
3 x | 90x75 mm standart servo cover |
1 x | OPTOTRONIX Aurora LCU |
2 x | Profile ABS half cane 2.5x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | 46 mm Futaba servo arm tandem with ball link |
2 x | Flat washer 1.7 mm (20 pcs) |
2 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Compact on-board starting system (9512) |
1 x | XH LiPo extension lead |
2 x | 5 line servos wire black (1 m) |
4 x | 2 mm male connector (2 pcs) with safety connector |
1 x | 50x45 mm micro-mini servo cover |
1 x | DLE Ignition unit |
1 x | Bidule 111 3000 mm Canopy |
3 x | Landing gear strap medium (4 uds) |
1 x | 90x60 mm standart servo cover |
2 x | XT-30 connector (pair) |
1 x | Futaba 38 mm servo arm |
2 x | XH male balance (2S) connector (2 pcs) |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
2 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Micro control horn T2 Ø 1 |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
4 x | 57 mm micro-mini servo cover |
2 x | Ball link M2,5 (10 pcs) |
2 x | Angle measurer |
3 x | Ball link M1.6 (6 uds) |
2 x | Glases Flitemaster |
2 x | Extension silicon 25 cm (Graupner) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | Small adjustable control horn with bearing |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
2 x | 65 mm mini servo cover |
1 x | 12 mm dogdrive props |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Kobuz 5000 mm (Airwold) |
2 x | SlowFlyer control horn (3 pcs) |
2 x | Profile ABS half cane 3x1000 mm |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
2 x | Flat Connector 4.0 mm x 1000 mm |
2 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
2 x | PowerFuel RX V2 Fuel Pump |
1 x | Ka 8 B (Top Model) |
2 x | DPSI Micro - RCS RV |
1 x | Opale Rucksack |
2 x | 5 LiPo XH>EH adapter |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
2 x | 1804 2400KV Brushless Motor Qav 250 mini |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | 1 m servo "Premium" wire (white/red/blue) |
2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
6 x | Stickers-digit for marking |
5 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Me-163 |
1 x | ABS angle 3,0x3,0x1000 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | 18 mm wing servo holder |
1 x | Allen wheel collar M3x3 |
1 x | Vertical mounting servo holder |
2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | DG-303 ACRO 3750 mm, winglets |
3 x | Electric spoiler 185 mm (2 pcs) |
2 x | Extension PVC 150 cm (Graupner) |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Servo safety connector (10 pcs) |
2 x | Life guard Ø 35,0 mm white/red (2 pcs) |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
2 x | Opto Gas Engine Kill Switch |
2 x | Landing gear axle 4x21 4 mm (2 uds) |
2 x | Short ball link M2 (6 uds) |
4 x | Long ball link M1.6 (6 uds) |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
2 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Hexagonal Nut M3 (10 pcs) |
2 x | Parachute BACKUP X100 |
2 x | DPSI RV Mini 6 (2008) |
2 x | Cabel charger transmitter GRAUPNER |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Floating M3 washer pad (36 pcs) |
2 x | Small aluminium horn red (2pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | SBEC Jeti |
1 x | DPSI RV Mini 6 Magic |
1 x | Swift S1 De-luxe 3.730 mm |
1 x | EME 55 cc carburetor WALBRO |
2 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
3 x | BABY glider (Aero-naut) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
3 x | DINO Glider ARC |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
2 x | Connectors banna oro 4 mm (M/F) |
1 x | BULLIT Wing 1095 mm |
2 x | Extension silicon 30 cm female (Futaba) |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | Rudder forward 80x28 "type Kato" |
2 x | X-RAY Micro QR (Fuselage with canopy) |
2 x | Canopy Sweet / Siesta |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Mounting single stop Ms 10 mm |
1 x | ASK 21 6.8m |
2 x | ASPIRE Red ARF 2.000 mm, Set Alas |
1 x | Adapter 4,0 mm M8 |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Ventus 2cx 4.5 m |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
4 x | Angle of incidence meter |
1 x | GPS Altis |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Mudguard for 140/165 mm wheels |
2 x | Spinner 50 mm White (Kavan) |
3 x | Glases Nimbus |
2 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Mounting base Ms 12 mm |
2 x | Opto Gas Engine Kill Switch |
2 x | Extension silicon 30 cm male (Futaba) |
2 x | Glases Ace |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | JM electric Pump |
1 x | Hitec 38 mm servo arm with ball link |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | L ELBOW 90º ø 25 mm |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Multi-adapter balancer JST/C - TP |
2 x | DPSI Ampere battery backer |
1 x | 6 mm Prop Adapter M8 |
1 x | Floating M4 washer pad (36 pcs) |
2 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | MPS Gas-Cap-Powerswitch |
1 x | SPARK Switch 5.9v |
1 x | MAX BEC 2 |
2 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Landing gear strap small (4 uds) |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Gold antispark 4 mm plug |
2 x | ESC ALPHA 60A HV |
1 x | Hexagonal Nut M1 (10 pcs) |
2 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | PIX Hawk with accesories |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | 30 cm BEC cable (male) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | 30 cm DEANS female connector |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Extension silicon 10 cm (Futaba) |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Socket Head Screw M2x8 |
2 x | F9F COUGAR Grey ARF 1.562 mm |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Cockpit metalic closing |
1 x | X-RAY Micro QR |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | ASPIRE Red ARF 2.000 mm, Fuselage |
1 x | Device Terminal |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Variable Flow Smoke Pump System |
2 x | Screw M3x30 (10 pcs) |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | DPS Switch Ampere |
1 x | Metal clevis M2 (10 uds) |
1 x | DPSI V-Match |
1 x | BULLIT Wing 840 mm |
1 x | Long ball link M3 (6 uds) |
2 x | Lock washer 2.2 mm (20 pcs) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | ODYSSEY CUST ARF 2190 mm |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Screw M4x12 (10 pcs) |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
2 x | ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO |
1 x | X-RAY Micro QR (Rudder) |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | Fox 4000 mm with flaps (Airwold) |
3 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | 300 Newtons FEMA absorber |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Futaba 52 mm servo arm |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Glider STROLCH |
1 x | Screw M3x5 (10 pcs) |
3 x | X-RAY Micro QR (Tail Tube) |
1 x | Crystal RX 35.120 Ch 72 |
2 x | Spring pin Ø 1 x 6 mm (10 pcs) |
2 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | DUPLEX R7 receiver nano 2,4 GHz |
2 x | Couple M4 for wire (10 pcs) |
2 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Circlick securite |
2 x | Screw M3x8(10 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Threaded coupler M2 (10 uds) |
1 x | HBC 10035-3 32-Bit |
1 x | Rubber profile 8-2 mm 2M |
1 x | Remote electric ignition system |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Spinner plastic white fixed propeller 45 mm |
2 x | BABY glider drawings (Aero-naut) |
1 x | Astra wing Joinner (Top Model) |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
2 x | Servo DITEX TD2612S |
1 x | BlueCom™ Adapter (iOS) |
3 x | F9F COUGAR Red ARF 1.562 mm |
2 x | Red 3m5 mm connector holder |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | Gobe R-26S (Airwold) |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
2 x | 15 mm floating pad (30 pcs) |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Chigre de amarre Scale 1:32 |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | LS-8 GFK 6m Glider |
1 x | Silicone red 1,0 qmm wire (100 m) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 22m Fitting barb |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | Silicone red 2,5 qmm wire ( 1 m) |
2 x | PSC 6 |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Extension silicon 100 cm (Graupner) |
3 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | ODYSSEY Blue ARF 2190 mm |
1 x | Pan Head Screw M2x6 PH |
1 x | 30 cm BEC cable (female) |
2 x | Lock nut M5 (10 pcs) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Propeller APC 9x6 SF |
2 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | Flip ARF (Top Model) |
1 x | Quicklock washer 4 mm (10 pcs) |
2 x | MPX housing with flange (4 pcs) |
1 x | Electric rocket starters (6 pcs) |
2 x | Spinner 55 mm White (Kavan) |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | 4 mm Prop Adapter M6 |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | DLE 30 complete electronic ignition |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Propeller CFK 12X6 |
1 x | EWC3 40 cm wing connector |
1 x | Ventus 1:4 set of instruments |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Silicone black 0,75 qmm cable ( 1 m) |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | USBCOM 5i |
2 x | Para-RC Mix |
1 x | M3 Maxi ball link (2 uds) |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | 40 mm servo arm with bearing (2 pcs) |
2 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Servo DITEX EL0510M |
2 x | Festo 4mm Tubing Holder (10 uds) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
3 x | Selfstarr EME35 |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
3 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Propeller POWER-PROP 7x7 |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
2 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | ASPIRE Red ARF 2.000 mm |
2 x | Avia (Top Model) |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Pulley brass 6/1,5 (2 pcs) |
2 x | Compact on-board starting system (9724) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | HERON RR |
1 x | SPS 70V 140/280 A |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | Spinner 60 mm White (Kavan) |
1 x | Tailwheel for F3A size |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | TX 250 mW especial GOPRO |
2 x | T-Motor U7-V2.0 Kv420 |
1 x | Racor 4/4 mm |
1 x | Extension 6 lipos XH > EH |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | 75 mm spinner (Carbon Imitation) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | Pinion 15 - 3,2 mm |
1 x | Bag connector 2 mm |
2 x | SAGITA Alsema 4.0 m |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
2 x | Extension silicon 30 cm male (Graupner) |
2 x | Epoxy 40 min (Resin). 25Kg |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | DUPLEX USB Adapter |
1 x | Crystal TX 35.100 Ch 70 |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Emcotec SPS Magnetic Switch Actuator |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Glases Aspen |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Cooler motor type 300 |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
1 x | Servo HITEC HS-225 BB |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | BEC 3A FOXY |
1 x | M3 black washers (4 pcs) |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | EDGE XL Orange |
1 x | Tailwheel for 20/60 size |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Extension 5 lipos JST/C |
1 x | DUPLEX MUI 50 Sensor |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Rescue 1,8m2 / BackPack |
3 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | Threaded coupler M3 (10 uds) |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Racor 4/3 mm |
2 x | Socket Head Screw M2,5x12 |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Extension 2/3 lipos JST/C |
1 x | Servo HITEC HS-82 MG |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | 1/6 Pilot "Tony" |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Connector Sub-D 2+5 Male |
1 x | Glases Innovation Plus |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Connector CAN 15 |
2 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
2 x | Tailwheel for 60/120 size |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Micro flex hinge (12 uds) |
1 x | Quick hose connector 3-3 mm |
1 x | MPX Support |
1 x | 30 cm MULTIPLEX female connector |
1 x | ODYSSEY BLACK Eagle ARF 2190 mm |
1 x | Extension for SensorSwitch 60cm |
1 x | Gear set HITEC HS-55 |
1 x | DLE Ignition 111/120/170 |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Circlick securite |
1 x | Avia spare blue cockpit (Top Model) |
1 x | TP/TopFuel - XH 2/3S Adapter |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Glidder Mü13e (Bergfalke) |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Tail wheel for 8-12 kg models |
1 x | ZENOAH ZG 80B |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Futaba male 40 cm extension |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Brake for 140 mm wheels |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | PIN Connector female (100 pcs) |
2 x | Glases Nimbus "Black" |
1 x | XTorque CFK Servohebel 38 |
2 x | Set Altimeter SHRead |
1 x | Shaft sleeve LAMA |
1 x | Decorative caps, multicoloured, short |
1 x | Futaba 20 mm servo arm |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Faucet FESTO |
1 x | Cooler motor type 150 |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | PowerBox iGyro 3xtra |
1 x | 2 LiPo XH>EH adapter |
1 x | Carb Carrier, red DA-150L/170 |
1 x | Xplorer3 anemometro |
2 x | Servo HITEC HS-5085 MG Digi |
1 x | Muffler DLE-120 Right |
2 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | OPTIC 8 opto Rx-servo insulation |
3 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | NIKE-2 EVO ARF |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Y-Hose connector 3-3-3 mm |
2 x | Compact on-board starting system (9715) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Pinion 18 - 3,2 mm |
2 x | Switch for DC: Long 3 Position |
1 x | Exhaust gasket DA50R DA100 DA200 |
1 x | Piston ring for DLE-55/111/222 |
1 x | Plastic wheels 28 mm (2 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | 1/10 Pilot "Jack" |
1 x | ODYSSEY Horns Set GFK |
1 x | Plastic wheels 36 mm (2 pcs) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Hacker X-Pro USB interface V2 |
1 x | Switch Cap M (silver) |
1 x | Horizontal servo holder |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Cylinder Gasket set for DA-60 / DA-120 |
1 x | Ventus 2cx 4.5 m de Luxe |
1 x | Compact on-board starting system (9713) |
1 x | Set Legs + Wheels with brake ASPIRE |
1 x | Paramotor Trike XL |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Silicone red 1,0 qmm wire ( 1 m) |
1 x | Crystal TX 35.150 Ch 75 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Screw M3x20 (10 pcs) |
1 x | 20 mm carbon horn |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Piston DLE 55/111/22 |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Body for landing gear Ø 4 mm |
1 x | 3 mm Long Prop Adapter M5 |
1 x | MPX screwable clips (5 pcs) |
1 x | Conector JR Servo female (10 pcs) |
1 x | ASPIRE Blue ARF 2.000 mm |
1 x | USB HLS prog. interface |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | Female connector for 10 pines AWG |
1 x | Red 4 mm connector holder |
1 x | Ferrita 27x14x7 mm |
1 x | Motor DA 120 |
1 x | Switch Cap L (silver) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Car Charger DC/DS-16 |
1 x | Selfstart electronic switch |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | UBEC 6A KAVAN |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | CC 02 |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | MRPM-AC revolution sensor |
1 x | Aluminium ignition bad (blue) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Aluminium servo arm (2 uds) |
1 x | Kit repair carburator DLE-85/111/120/222 |
1 x | Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Reed valve for DA 50-R |
1 x | Air pressure gauge |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Adjustable launching hook |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | DUPLEX MRMP Hall EX |
1 x | Motor Moki 180 |
1 x | Conector JR Servo male (10 pcs) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Fixing Ring with Base 40 mm |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Ignition module ZG 38/S/SC |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | CC 01 |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | DUPLEX 2.4 EX MBar |
2 x | Canister combo DLE 120 cc |
2 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Jeti Advance Pro Program Card |
2 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Tank + hopper Kevlar ASPIRE 6 L Kero |
1 x | Ventral support for AX-18/AX-60 |
1 x | Sparkplug DLE CM6 |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Body for landing gear Ø 3 mm |
1 x | Moki Exhaust Bend 200 mm |
1 x | Truck-trailer for gliders 720 x 239 mm |
2 x | Conector JR Servo female (10 pcs) |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | PowerBUS to BUS |
1 x | Canister combo DLE 55 cc |
1 x | 4 LiPo XH>EH adapter |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
2 x | IKURA 4.0 m |
1 x | 22x10 BIELA propeller |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | Futaba 30 mm servo rounded arm |
1 x | CC 05 |
2 x | DLE 55 Ignition unit |
1 x | Servo HS-5070 MH Hi Volt |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Insulator block ZG 38/S/SC |
1 x | EnLink 2RS Plus - DUO |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | Prop rubber XS set 4 pieces |
1 x | Esc MasterBasic 90 Opto |
1 x | Cylinder for DA-60 and DA-120 |
1 x | Propeller CFK 14x7 |
1 x | DC Small for MultiLog & UltraLight |
1 x | MAX pilot ARTF |
1 x | Vertical servo holder |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Transmitter Stick Ends V4 Blue- M3 (2 pcs) |
2 x | Dean "T" - Futaba Adapter |
1 x | Esc X-40-SB-Pro |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260 |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Flybar support metal LAMA |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Stick coupler Ms 15 mm |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | 3-Blade Spinner 70 x 70 mm GFK |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | PowerBox MagSensor red connector |
1 x | MPX screwable clips (4 pcs) |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Propeller CFK 18x19 |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | PowerBox ROYAL SRS |
1 x | Kit repair carburator DLE-170 |
1 x | Turbine KingTech K45G4+ |
1 x | Support hands Issuer PROFI TX |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
2 x | Q-12 2000 mm Electric |
1 x | Servo HITEC D950 TW |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | KIRA 480-31 5,2:1 |
1 x | SBEC 40 |
1 x | Spring for jet needle, fits DA-60/70 |
1 x | Bidule 55 2460 mm Cabina |
1 x | Screw M3x16 |
1 x | DLE Ignition 170M |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Gasket set DLE-30 |
1 x | ODYSSEY Navy ARF 2190 mm |
1 x | Parachute PV6 for F3J |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Jet Pipe for ASPIRE 2m JMF |
1 x | Tap FESTO 4-4 mm |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Micro Switch button |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | Propeller CFK 23x12 |
1 x | 1/12 Pilot "Langley" |
1 x | Racor "Y" 3 mm |
1 x | DPSI RV Mini 5 (2008) |
1 x | Screw M3x12 (10 pcs) |
1 x | 6 mm M3 variable horn |
1 x | Switch Cap L (Red) |
1 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
1 x | PowerBUS Lead 200 cm |
1 x | Pinion 15 teeth (3:1) 2,3 mm axi diameter |
1 x | Antenna holder bracket double |
1 x | Servo HITEC HS-325 BB |
1 x | SBEC 30 D |
1 x | Split M1,2x10 (10 pcs) |
1 x | Muffler DLE 20 |
1 x | Surprise XII Rudder (Freudenthaler) |
1 x | Muffler DLE 20-RA |
1 x | Spinner 102 mm |
2 x | L-Connector 1.5 mm x 1000 mm |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Carburetor DLE 30 |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Charger 220/110v |
1 x | Aluminium ignition bad (red) |
1 x | 800TVL CMOS camera for FPV |
1 x | Lock nut M2 (10 pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Propeller Pleg Glass-Fiber white 15x9.5 |
1 x | Pinion 24 - 3,2 mm |
1 x | Esc X-75-OPTO-Pro |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Extension silicon 100 cm (Futaba) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 5 mm M2 variable horn |
1 x | Tow hook for tug |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | IKARUS plane |
1 x | TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo |
1 x | Bungee HLG Premium |
2 x | RANGER Jet CANADA 1.854mm combo |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | Futaba T3PV T-FHSS |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | Tx JETI Duplex DC-24 II Carbon Line Ruby |
1 x | Captador RCEXL para DA |
1 x | Air Intake manifold 90° - Large |
1 x | 5 mm gas motor standoff |
2 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | AIRSPEED SENSOR SBS01TAS |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | Tx JETI Duplex DC-24 II Carbon Line Gray |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | Futaba Radio Case |
1 x | Transmitter JETI Duplex DS-12 EX Multimod RED |
2 x | Slider Extenion for CORE |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
2 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
2 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Dia. 20x15 mm teflon tube for escape |
1 x | Propeller balancer |
1 x | QUANTUM II 55 Brushless Motor |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | Motor A2212/13T |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark ORANGE Multimo |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
1 x | TURBINATOR 2 RED/WHITE 1778 mm Combo |
2 x | Pipa 3D F-16 Scale 1/6 |
1 x | F-16 Scale 1/6 G3 Airex Deco: AF 916F |
1 x | RANGER Jet Red/Yellow 1.854mm combo |
2 x | TURBINATOR 2 ORANGE/SILVER 1778 mm Combo |
2 x | Transmitter JETI Duplex DS-12 EX Special Edition |
1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
1 x | JETI transmitter DC-14 II Green Multimode |
1 x | Rocket D9-7 |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | PowerPack 2.5X2 PRO |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Transmitter JETI Duplex DC-16 II YELLOW Carbon Line Mod.2 |
2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
2 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Epoxy Resin L (2.5 Kg) |
2 x | resin-hardener L-385 H-385 (625 g) |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Mould Resin P 10 kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | MEKP Harderner 100 g |
1 x | White gelcoat 1 Kg |
1 x | resin-hardener L-385 H-385 (5000 g) |
|
166,426.14EUR |