2 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
3 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | ABS tube 9.0x8.0x1000 mm |
2 x | 18x10 BIELA pusher propeller |
2 x | 22x10 BIELA pusher propeller |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | 16x10 BIELA propeller (3-blades) |
1 x | 23x8 BIELA propeller |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | 18x6 BIELA propeller |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | 22x10 BIELA propeller |
1 x | Extractor piñones 2.3/3.2 mm |
3 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | ABS tube 7.0x6.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | 26x12 BIELA 3Bl Pusher propeller |
1 x | ABS tube 5.0x4.0x1000 mm |
2 x | ABS tube 7.0x5.0x1000 mm |
2 x | ABS tube 14.0x10.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | ABS tube 20.0x18.0x1000 mm |
2 x | ABS tube 4.0x2.0x1000 mm |
2 x | ABS tube 5.0x4.0x156 mm |
2 x | BIELA 25x10 WILGA Propellers |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
3 x | 18x10 BIELA propeller |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | 26x16D BIELA 3Bl propeller (3-blades) |
1 x | ABS tube 4.0x3.0x1000 mm |
3 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | 24x8 BIELA propeller |
3 x | CF tube set (Ø 38 mm y Ø 14 mm) |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
2 x | ABS tube 3.0x2.0x1000 mm |
1 x | 16x8 BIELA propeller (3-blades) |
1 x | Connector CAN 15 |
2 x | XH female balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
2 x | Conector Servo female 4 pines |
2 x | XH female balance (3S) connector (2 pcs) |
2 x | XH male balance (5S) connector (2 pcs) |
1 x | 30 cm DEANS female connector |
1 x | Conector BEC female (10 pcs) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | Connectors DEANS (T) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Conector BEC male (10 pcs) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | 1/6 Pilot "Buddy" |
2 x | 1/4 Pilot "Mike" |
2 x | 1/6 Pilot "Tony" |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
4 x | 1/10 Pilot "Jack" |
3 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Motor A2212/13T |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | Profile ABS Square 2 x 1000 mm |
3 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
3 x | Profile ABS Square 4 x 1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
2 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
4 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | ABS angle 6,0x6,0x1000 mm |
3 x | Profile ABS Square 1 x 1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
3 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | 30 cm BEC cable (male) |
1 x | 25 mm reinforced hinge |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Vasa model Catapult |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Support XT60 conector (2 pcs) |
4 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
4 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
4 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
4 x | ABS tube 8.0x6.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | 19x8 BIELA propeller |
1 x | 32x22D BIELA propeller |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | 26x18 BIELA propeller |
1 x | 40x22D BIELA propeller |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Three-function control switch by FUTABA |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Bag connector 2 mm |
2 x | Red 4 mm connector holder |
1 x | Maleta transporte FUTABA 10PX |
1 x | Switch Cap L (Blue) |
1 x | Neck strap Double V2 |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Futaba Neckstrap |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Switch Cap L (silver) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Decorative caps, multicoloured, short |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Battery FUTABA 18MZ |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Switch Cap M (red) |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Connectors MPX black female |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | XT-60 connector (male) |
2 x | 1/6 Pilot "Garry" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | |
2 x | Piloto jet 130 mm |
2 x | Pilot "Anthony" (Slimline) |
3 x | Pilot "Goose" (Slimline) |
3 x | Pilot JAN 1/4 Saiplanes |
2 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Mini DART 2 F3K carbon light 1m Green |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Ring 320 mm length (5 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Propeller APC 14x10 Electric |
1 x | Propeller APC 10x4.7 SF Pusher |
2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
2 x | 1/12 Pilot "Fighter" |
2 x | Piloto JET 1:3,5 |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
4 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Profile ABS half cane 8.0x1000 mm |
2 x | Profile ABS half cane 2.5x1000 mm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 1/12 Pilot "Langley" |
1 x | ABS angle 3,0x3,0x1000 mm |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Sheet Depron Aero 1250x800x3 mm |
2 x | Aluminium ignition bad (red) |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Bujia OS G5 gasolina |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Glass fabric 425 g/m² aero,10x1m |
2 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Spark motor OS nº 8 |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Secraft Fuel system v2, red color |
2 x | ABS tube 5.0x3.0x1000 mm |
2 x | Fiberglass tube 6/4x1000mm |
2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
2 x | Ring support P-20 OPUS V-Jet 60mm |
2 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
2 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
3 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
2 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
3 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
4 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | 50N turbine start protection tube |
2 x | OPUS-V / Jet-CC-BF |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Propeller APC 13x10 Electric |
1 x | Propeller APC 10x6 Electric Pusher |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | AXI 2808/16 V2 Long |
1 x | Challenger ARF (Top Model) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | DSM 10 Dual Switch Mixer |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Gearbox KPG27 5,2:1 |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | DUPLEX R12 receiver REX Assist |
1 x | AXI 2820/10 V2 |
1 x | MPX Support |
1 x | Protector Connector Dean-T (1 pair) |
1 x | AXI 2808/20 V2 |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
2 x | XT-60 connector (female) |
1 x | AXI 2217/20 V2 Long "F5J" |
1 x | DUPLEX R10 receiver 2,4GHz |
1 x | DUPLEX R6 receiver REX Assist |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Connectors DEANS (T) micro |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | 13 mm wing servo holder |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Tray JETI for DS-12 Black |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Hand Pads for Tray JETI |
1 x | Transmitter COCKPIT SX 12 M-Link (only Tx) |
1 x | Teacher / Student Cable |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | DUPLEX R6 EX receiver 2,4GHz |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Hovercraft sailcloth |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Compact on-board starting system (9724) |
1 x | Starter EM Gear Power 80 |
1 x | Compact on-board starting system (9715) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Actuator Electric 25 mm |
1 x | Giant Scale Muffler D.A. 70 |
1 x | CHALLENGER Indoor |
2 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Adapter FUN 400/480 |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Servo KST A08H V6.0 3,2Kg HV |
2 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
2 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | Soporte servo KST X08/H and Plus |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
|
22,089.71EUR |