2 x | Buy Perforated film 100 cm / 50 m |
2 x | ABS tube 7.0x6.0x1000 mm |
2 x | ABS tube 3.0x2.0x330 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
3 x | ABS tube 6.0x5.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Silent-blocks DLE 170M |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Paramotor BackPack XXS 2 |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Cap Hispano Aviación |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Motor DLE 200cc Std |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | ABS tube 8.0x7.0x1000 mm |
2 x | ABS tube 9.0x8.0x1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Restrictor FESTO 3/3 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | HDT Jet Central |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Xplorer2 anemometro |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Ignition for DA-35 (without pickup sensor) |
2 x | ABS tube 16.0x14.0x1000 mm |
1 x | Windsock Ozone L - 700 mm |
2 x | ABS tube 7.0x5.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Motor DLE 200cc Premium Muffler |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | LUCAS pilot ARTF |
1 x | Parachute P4 |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Xplorer4 anemometro |
2 x | Wing OXY 0,5 pulgadas2 |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
2 x | ABS tube 14.0x10.0x1000 mm |
1 x | Motor A2212/13T |
1 x | Rescue 1,8m2 / BackPack |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | ZERO Figther A6M52 93", Electric retract Landing gear ELECTRO |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | ABS tube 6.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Racor 4/6 mm |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Pin hinge 39x20 mm (10 uds) |
3 x | ABS tube 20.0x18.0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | VBar Control Touch, midnight black |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Small Crow DLE-170M |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Aramid 50 daN 50 m |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Motor DLE 170 M- Paramotors |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Servo inverter |
1 x | Mono-Switch Memory FUTABA |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Tank gas KUZA 260 cc |
1 x | Tank gas KUZA 500 cc |
1 x | Flat Connector 4.0 mm x 1000 mm |
2 x | ABS 500 x 400 x 2,0 mm (white) |
2 x | ABS tube 3.0x1.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Vest clothes Hispano Aviación |
1 x | Softshell Hispano Aviación |
2 x | Paramotor Trike XL |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Wing OXY 5,0 m2 |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
2 x | ABS 500 x 400 x 1 mm (white) |
1 x | Big Crow DLE-170M |
1 x | Rubber profile 8-2 mm 2M |
1 x | Rubber profile 6-2 mm 2M |
1 x | Xplorer1 anemometro |
1 x | 18m Fitting barb |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Para-RC Mix |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Parachute BACKUP X100 |
1 x | Parachute PV6 for F3J |
1 x | Opale Rucksack |
1 x | Windsock Ozone L -1200 mm |
2 x | Rubber profile 10-2 mm 2M |
2 x | Profile ABS half cane 5.0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Shirt Hispano Aviación |
2 x | Set cintas unión paracaídas 145 cm |
2 x | ABS tube 8.0x6.0x1000 mm |
1 x | Xplorer3 anemometro |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Turbina X132 H "Light Version" |
1 x | LiPo KAVAN 3700 mAh 11.1v 40/80C |
1 x | Electric Fuel Pump 12v |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | XT60 Connector with Holder Male 2pcs |
2 x | Motor DA 85 |
2 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
3 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | Mini VISION "spread tow" CFK |
1 x | Propeller MEJLIK 29x10S |
2 x | Motor DA 60 |
3 x | THERMIK XL 4000 mm |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
2 x | TAKEO 3.6m electric |
2 x | Motor DA 50-R |
2 x | Propeller MEJLIK 28.5x12 S-3 Blades |
1 x | Propeller MEJLIK 21x8 CFK |
2 x | Motor DA 170 |
2 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Propeller MEJLIK 20x8 CFK |
3 x | Motor DA 100L |
1 x | Propeller MEJLIK 22x10 |
2 x | Propeller MEJLIK 23x8 CFK |
1 x | Propeller hub spacer 8/5.5 |
2 x | Motor DA 150 |
1 x | Carburetor DLE 30 |
1 x | DA 70 Twin Gas Engine |
2 x | Servo DITEX TD2612S |
1 x | Propeller MEJLIK 30x12 |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Propeller MEJLIK 26x12 N-3 Blades |
2 x | Propeller MEJLIK 24x10 TH |
1 x | Glases Moritz |
1 x | Glases Stratus |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Glases Nimbus "Black" |
1 x | Glases Innovation Plus |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Servo TOPMODEL S7520 MG |
1 x | Motor DLE 85 cc |
2 x | Motor holder for AC 28/7 |
1 x | Escape Moki 100 BVT |
2 x | LASER 73" 1.85m (05) PILOT |
3 x | Motor Moki S 250 cc 5 cyl with autostarter |
2 x | Baffles for Radial Moki S180/320 mm |
5 x | Carburator Moki S250 |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Indoor Brushed motor kit |
1 x | |
1 x | Cooler motor type 300 |
3 x | Motor Moki S 250 cc 5 cylinders |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Moki Carburetor Throttle Arm with Extension |
1 x | Equipment set XL |
1 x | Flange gasket MOKI carburetor |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
2 x | 2 LiPo XH>EH adapter |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Compact on-board starting system (9512) |
3 x | Compact on-board starting system (9713) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
3 x | Connector CAN 15 |
3 x | 30 cm BEC cable (female) |
2 x | Opto Gas Engine Kill Switch |
3 x | Selfstarr EME35 |
2 x | Electromotor starter EME 35cc |
1 x | Aluminium ignition bad (blue) |
2 x | Circlick securite |
2 x | GLOW 9C + accesories |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Connector Sub-D 2+5 Female |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | Adapter lead MPX/EC3 |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | GLOW 5C + accesories |
1 x | DLE 30 complete electronic ignition |
1 x | Connector Sub-D 2+5 Male |
2 x | Truck-trailer for gliders 720 x 285 mm |
2 x | BEC 3A FOXY |
2 x | Angle measurer |
4 x | 5 LiPo XH>EH adapter |
1 x | 4 LiPo XH>EH adapter |
2 x | CC 03 |
2 x | RCEXL Electronic ignition twin CM-6 |
1 x | WingFix ULTRA Black Edition |
3 x | CM-3 |
2 x | Field folding model stand |
2 x | Propeller balancer |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | Field folding model stand SebArt |
2 x | 30 cm BEC cable (male) |
2 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
2 x | Dean "T" - Futaba Adapter |
2 x | Ignition bed V2 Red color |
1 x | Surface Indicator Gauge Small |
1 x | Propeller balancer |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
2 x | 17x10 BIELA propeller SCALE (3-blades) |
2 x | 17x8 BIELA propeller |
1 x | 24x10 4Bl Scale |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
2 x | 17x10 BIELA propeller (3-blades) |
1 x | 26x12 BIELA 3Bl Pusher propeller |
2 x | 28x10 BIELA propeller |
1 x | Motor Advance 30-10 F3A |
1 x | 23x8 BIELA propeller |
2 x | Rotorshape Autogyro |
2 x | Motor ORBIT 20-12 with coolingfan |
2 x | ASH 31 6.08m Composite Hollow Molded |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
2 x | 24x8 BIELA propeller |
1 x | 23x10 BIELA propeller (4-blades) Scale |
3 x | Motor HP 220/30/A3 P4 5:1 |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
2 x | 16x8 BIELA propeller (3-blades) |
1 x | 22x12 BIELA propeller (3-blades) |
3 x | 26x8 BIELA propeller |
1 x | THERMIK XXXL 4,9m CFK Electric |
1 x | 18x6 BIELA propeller |
2 x | 18x8 BIELA propeller |
1 x | 22x10 BIELA pusher propeller |
1 x | 18x10 BIELA propeller |
2 x | Propeller POWER-PROP 7x7 |
1 x | 26x18 BIELA propeller |
1 x | 16x8 BIELA propeller (4-blades) Corsair Scale |
1 x | 24x12 BIELA 3Bl propeller (3-blades) |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | Motor Advance 50-6 |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
1 x | 25x14 4Bl Scale |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Emisora JETI Duplex DS-16 II Carbon Line YELLOW |
2 x | SERVO DES 806 Pignons |
1 x | Transmitter JETI Duplex DS-12 EX Special Edition |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Stainless Steel Bend D 18x0,5 mm |
1 x | Piñones SAVOX SH-0350 |
1 x | "S" set for boats |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Futaba 38 mm servo arm |
1 x | Gasket, Aluminium-Plate >reed valve carrier DA-85, DA-100L, DA-1 |
1 x | Towing hook |
1 x | Pendulun 27g to tank |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Propeller MEJLIK 18x8 CFK |
1 x | Propeller MEJLIK 16x11 3 Blades |
2 x | Regler autostarter MOKIS250 |
2 x | Propeller APC 10x4 Glow/Gas |
1 x | Fox 4000 mm Airworld,cabina |
2 x | F3A carbon 85 mm spinner for Hacker Q-80 |
3 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
2 x | Motor DA 120 |
1 x | Avia (Top Model) |
2 x | Propeller APC 8x4 Glow/Gas |
2 x | Propeller G-Sonic 20x8 |
1 x | Spinner NUT M10x1 |
1 x | Spinner NUT M4 |
2 x | Propeller APC 15x6 Glow/Gas |
1 x | Propeller APC 12x10 Glow/Gas |
2 x | Propeller APC 16x10 Glow/Gas |
2 x | FOX ARF 2000 mm Red (Hacker Model) |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
2 x | Motor Moki S 400 cc 5 cylinders |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Propeller FALCON 5-BL 24x23.5 |
2 x | Flex-headers for Valach VM 85B2-FS |
2 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
2 x | Stainless steel flange for VM 60/70/120/140 |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | Central piece 38 mm 0º |
2 x | Glow filter |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Central piece 52 mm + 5º |
1 x | Red spinner 40-45 mm |
1 x | Spare white 30-36 mm spinner |
1 x | FIALA Propeller 27x10 |
2 x | Central piece 62 mm 0º |
1 x | FIALA 22X8 BLACK WOODEN 3-BLADE PROPELLER (GAS) |
1 x | 25 mm reinforced hinge |
1 x | LS-8 GFK 6m Glider |
1 x | FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Central piece 52 mm + 2,5º |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Starter EM Gear Power 250 |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Spinner 3BL propeller pleg. 36 mm / 4,0 mm |
1 x | Spare white 38-45 mm spinner |
2 x | Central piece 47 mm 0º |
3 x | 3 LiPo XH>EH adapter |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Carburator Moki S 180 |
1 x | Turbina KINGTECH K320 G5 |
3 x | Motor Moki S 500 cc 5 cylinders |
1 x | FOD Screen K45/60/70/85 |
1 x | Battery LiFe -1450/25C-3S 9.9V |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
1 x | FOD Screen K140G/K180G/K210G |
1 x | Bomba KP500V Kingtech |
1 x | Motor MOKI 160 BVT boxer 4-stroke |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Turbina KINGTECH K70G4 |
1 x | EDGE XL Orange |
2 x | Moki Pushrod S250 (1 pcs) |
1 x | KingTech T-Modul 5 in 1 Telemetry |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Air filter MOKI |
1 x | Propeller MEJLIK 28x10 |
1 x | Turbine KingTech K30G Restart |
1 x | ASG 32 560 mm |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
2 x | Motor D.A. 200 Magnesium |
1 x | Exhaust K45TP |
3 x | Gear set HITEC HS-81 |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
3 x | Compact Pitts Muffler OS MAX.35.40 FP |
2 x | Junta humo metalica G30 (DLE30/DLE60) |
3 x | Giant Scale Muffler D.A. 70 |
2 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | eFuel 30A Power Supply |
3 x | Starter EM Gear Power 80 |
1 x | DPSI Ampere battery backer |
1 x | Aluminium ignition bad (red) |
1 x | X-RAY Micro QR (Elevator) |
1 x | SBEC 30 D |
1 x | Foam plastic plates (310x210x8 mm) |
2 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon plate 350x150x0.5 mm |
2 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Propeller POWER-PROP 11x6 |
1 x | Pilot JAN 1/4 Saiplanes |
2 x | O-ring Saito FG-73 5cyl |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
2 x | Piston for DA-60 DA-120 |
1 x | Aluminium-screw, M5x16mm Red |
1 x | Spring for jet needle, fits DA-60/70 |
1 x | Regulador Actro-Marine 60A |
1 x | BOX-Setup Actro-marine |
3 x | Painting GHT Lexan Black 150 ml |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | 20 g tin paste |
2 x | 500 ml sealer (DOPE) |
1 x | 1000 ml sealer (DOPE) |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | SBEC Jeti |
1 x | Turbo Prop KS |
2 x | Short Switch On/Off micro |
1 x | MPS Gas-Cap-Powerswitch |
2 x | TrainerCord (master-learner) |
1 x | MPX-Dean "T" Adapter |
1 x | Servo M2x9/16 screw (4 pcs) |
2 x | Turbine RHINO 200 SE 20.4 Kg |
2 x | Cabel charger transmitter GRAUPNER |
3 x | Multi-adapter balancer JST - TP |
1 x | Compact on-board starting system (9715) |
1 x | SPS 70V 100/200 A |
1 x | Compact on-board starting system (9724) |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | DLE Ignition unit |
2 x | Male connector for 10 pines AWG |
1 x | 3,9 mm ZG20-ZG38 servo arm |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | 32x22D BIELA propeller |
1 x | Miniature brass strap hinge, 1 m |
1 x | Extension 6 lipos XH > EH |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | THERMIK XXXL 4,9m D-Box Electric |
1 x | 32x10 BIELA propeller |
2 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Propeller BIELA 20x12 5 Bl |
1 x | 22x10 BIELA propeller |
1 x | Male connector for 16 pines AWG |
1 x | CC 05 |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | 32x14 BIELA propeller (3-blades) |
1 x | Extension 5 lipos JST/C - JST |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 32x18D BIELA propeller |
1 x | 28x12 BIELA 3Bl Pusher propeller |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | SUS wire 3m (nylon coated) |
2 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | Gear carbonite set HITEC HS-6965 |
1 x | Gear set HITEC HS-7950TH |
1 x | Gear set HITEC HS-55 |
1 x | Spinner plastic white fixed propeller 51 mm |
2 x | Spinner INO 51 mm Chrome (Imitacion metal) |
2 x | Combo AM480 T-Motor 650 Kv |
2 x | Spinner INO 75 mm Chrome (Imitacion metal) |
2 x | Spinner INO 63 mm Chrome (Imitacion metal) |
2 x | USB programador GO servos |
2 x | 10 mm gas motor standoff |
2 x | Servo HITEC HS-65 HB |
1 x | Servo HITEC HS-7975 TG |
1 x | Size "M" motor holder for class 600 |
2 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Servo HITEC HS-645 MG |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Round Rod 4,0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Servo AN-8 HBA |
1 x | Release wax 250ml |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Ply-Span 450x600/13g Orange |
1 x | Spray adhesive AEROFIX 2 |
1 x | Universal Colour Paste deep black 250 g |
1 x | Oracover light Grey 2m |
2 x | Spannlack 1000 ml |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Ply-Span 450x600/13g Blue |
1 x | Oracover Red 2 m |
1 x | Ply-Span 450x600/13g Yellow |
2 x | Servo HITEC D-955 TW Titanium |
1 x | Gear set HITEC HS-65 HB |
1 x | Gear set HITEC HS-311/322/325BB |
2 x | Servo HITEC HS-311 |
2 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Propeller APC 10x6 Glow/Gas |
1 x | Gear set HITEC HS-225 |
2 x | Servo HITEC D145 SW |
1 x | Propeller POWER-PROP 10x7 |
1 x | Servo HITEC D625 MW |
1 x | Propeller electric carbon 6x5 |
2 x | Propeller APC 11x6 Glow/Gas |
2 x | Servo HITEC D951 TW |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
2 x | Servo HITEC D941 TW |
2 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
3 x | Servo HITEC HS-125 MG |
1 x | Propeller APC 15x8 Glow/Gas |
2 x | Servo HITEC D131 MW nano |
3 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Servo HITEC D950 TW |
1 x | Helice APC 14x4 W |
2 x | Servo Digital HITEC HS-5065 MG |
2 x | Propeller APC 16x8 Glow/Gas |
2 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Propeller APC 14x6 Glow/Gas |
2 x | Propeller APC 12x4.5 MR Electric Pusher |
2 x | Servo HITEC HS-45 HB, servo box |
2 x | Gear set HITEC HS-125MG/5125MG |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Propeller APC 9x6 Glow/Gas |
2 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
2 x | Spinner INOVA 63 mm White |
4 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
2 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
2 x | 63 mm INO spinner (carbon imitation) |
2 x | NF-3X-350 set |
3 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
3 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
3 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
2 x | Nut for 515/518/519 spinner special for Hacker |
1 x | F3A carbon 80 mm spinner for Spark EVO |
3 x | 89 mm INO spinner (carbon imitation) |
3 x | 51 mm INO spinner (carbon imitation) |
1 x | KONDOR 15-92 |
2 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | Propeller KAVAN 32x12 2-Bl |
2 x | Spinner plastic white fixed propeller 45 mm |
2 x | Spinner INO 82 mm Chrome (Imitacion metal) |
3 x | 102 mm INO spinner (carbon imitation) |
1 x | Helice FOXY 22x10 2-Bl |
2 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | VALACH Motor VM R5-250 cc |
1 x | Fan for A60 |
1 x | Servo GO-1053 MG 20.0kg |
2 x | Servo GO-09 9g |
2 x | Servo HITEC HS-5475 HB Digi |
2 x | Cooler motor type 400 |
1 x | Servo HITEC HS-7955 TG Coreless Digi |
1 x | Servo HITEC HS-81 |
2 x | Servo HS-7980TH digi high voltage ultra torque |
2 x | Servo HITEC HS-65 MG |
1 x | VALACH VM 85 B2-FS |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | Motor mount for 1200 mm models |
2 x | Servo HITEC HS-53 |
2 x | A50 Motor Mount Alu complete set |
2 x | Frontal support Speed 280 |
1 x | Servo HITEC HS-77 BB Low Profile |
2 x | Servo HITEC HS-56 BB |
2 x | Size "M" motor holder for class 400 |
2 x | Servo HITEC HS-5087 MH |
1 x | Servo HITEC HS-85 BB |
2 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Frontal support Speed 600 |
2 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Receiver bed (Blue) |
1 x | Cylinder head, left for VM 170/210 |
2 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Servo HITEC HS-7954 SH Digital High |
1 x | Servo HITEC HS-7115 TH |
1 x | Set Micro-horns HS-60/81/85 |
2 x | Servo HS-5070 MH Hi Volt |
2 x | Servo HITEC HS-5245 MG Digi |
2 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
2 x | Motor mount for 1 m models |
1 x | Servo HITEC HS-635HB Carbonite |
1 x | Servo GO-02 Digital 1.8g |
2 x | Servo HITEC HS-5645 MG Digi |
1 x | Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | Servo HITEC HS-5685MH |
1 x | Motor Mount for Multiplex FunJet |
2 x | Servo HS-5765MH High Voltage |
1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
2 x | |
1 x | Exhaust gasket Valach 85 |
2 x | Motor holder AXI |
2 x | Fiberglass motor-holder for electric motors |
3 x | Servo HITEC HSB-9380TH |
1 x | Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo |
1 x | Electric coversion set |
1 x | Servo HITEC HS-5625 MG Digi |
1 x | Servo GO-1013 MG 3.8kg |
2 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
2 x | Fiberglass motor-holder for electric motors |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Servo HITEC HS-85 MG |
3 x | Ø 40 mm fiberglass motor-holder for electric motors |
3 x | ACTIVE ARF Electric 1.995 mm |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Servo HITEC HS-75BB Retract |
1 x | Servo HITEC HSB-9370TH |
1 x | Bearings for motor HACKER C50 |
1 x | Motor mount M |
3 x | Servo HS-5565MH High Voltage |
1 x | Cooler motor type 280 |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | VALACH Motors VM 70 S1-4T |
2 x | Servo HITEC HS-5485 HB Digi |
1 x | Propeller APC 12x4.5 MR |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | Propeller APC 16x5.5 MR |
1 x | BU 131 Jugmann Panel Instrum. frontal |
1 x | FIALA Propeller 23x10 |
1 x | Strip 2,5x1,25x330 mm |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Aero-Master Wings (Aero-naut) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | entral piece 3Bl 42 mm 0º |
1 x | Spare spinner 40/42 mm 3-Bl |
1 x | Spinner plastic red propeller pleg. 30 mm / 3,2 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | 20x200 mm battery rings |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Coupling for M6 axis |
2 x | FIALA Propeller 18x8 |
1 x | Central piece 52 mm 0º |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Central piece 42 mm 0º [6 mm] |
1 x | FIALA Propeller 20x8 |
1 x | Spinner 3BL propeller pleg. 40 mm / 4,0 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | 100 mm rods + T patellas set for direction control |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Crystal RX 35.120 Ch 72 |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Crystal TX 35.180 Ch 78 |
1 x | BU 131 Jugmann ARC |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | LO 100 ARC 3.3m,cabina |
1 x | 45 mm white plastic spinner for folding propeller |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Spinner propeller pleg. 36 mm / 5,0 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 42 mm white plastic spinner for folding propeller |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 5,0 mm |
1 x | LO 100 ARC 3.3m |
1 x | Spinner propeller pleg. 45 mm / 4,0 mm |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Red spinner 45 mm |
1 x | Allen wheel collar M3x3 |
1 x | Moki Exhaust Bend 200 mm |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Baffles for Radial Moki S250/330 mm |
1 x | Motor MOKI S 250 cc 7-cylindrer |
1 x | Motor NGH GF 150 R5 |
1 x | Initior Transmitter FTX2 Wireless |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Cockpit aluminium closing |
1 x | EDGE 540-A 91" (2310 mm) |
2 x | EXTRA 300 78" V3 Orange/Blue |
1 x | Cockpit plastic closing |
1 x | Pinion 18 - 2,3 mm |
1 x | Pinion 18 - 3,2 mm |
1 x | Pinion 13 - 3,2 mm |
1 x | Servo HITEC HS-785 HB |
1 x | Pinion 11 - 2 mm |
1 x | Female connector for 12 pines AWG |
1 x | Female connector for 16 pines AWG |
1 x | Male connector for 12 pines AWG |
2 x | Micro Switch button |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | SERVO DES 568 MG |
2 x | UBEC 6A KAVAN |
1 x | NF-3XL set |
1 x | Motormount DA-100, DA-100L and DA-120 |
1 x | Gasket carburetor carrier->crankcase DA-85 DA-100L DA-120 DA-200 |
1 x | Ball bearingfront for DA-50/60/VM120B2 Ball bearing for DA-170 |
1 x | Pitts Muffler kit for CAP 21 |
1 x | Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA |
1 x | Cylindergasket DA 170 |
1 x | Gasket, Carburetor DA-150/170 |
1 x | Fixed launching hook |
1 x | PSC 5 |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
2 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
2 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
2 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
3 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | White spinner propeller pleg. 55 mm / 5 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Carburator gasket MOKI |
1 x | EXTRA 300L 1.2 m Blue |
1 x | Carburator Moki S400 |
1 x | Motor Moki S 300 cc 5 cylinders |
1 x | Motor Moki 100 BVT |
2 x | Drilling-template set for Moki engines Moki S150, S180, S215, S2 |
1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
1 x | Smoke set "S" |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Smoke set "M" |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Presto SF Light Filler styrene-free (420 g) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Hobbylite Filler, Balsa colour |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | EXTRA 330SC-E 95" Orange/Blue/White |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Fiberglass plate 350x150x1.5 mm |
2 x | Servo HITEC HS-5585MH |
1 x | Pinion 18 - 3,2 mm |
1 x | Male Prolonger TP 4/5S |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | EVOLUTION 10 GX gasoline motor |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | JETImodel SINGLE BEC |
1 x | SERVO DES 707 BB MG |
2 x | EWC3 100 cm wing connector |
1 x | Servo HBS 690BB HV Digital |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | NF-1 RC set |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Ball bearing middle DA-120 |
1 x | Distanzstück motor OS 120 AX |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | Carburetor diaphragm set DA-150/170 |
1 x | Aluminium-screw, M5x20mm Red |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Crankcase gasket DA-100 |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Pilot "Goose" (Slimline) |
1 x | 38 mm aluminium spinner. |
1 x | X-RAY Micro QR |
1 x | Turbine LYNX 130 |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | BIELA 19x7 WILGA Propellers |
1 x | Female connector for 6 pines AWG |
1 x | DJI Mavic Air Fly More Combo |
1 x | 80 mm rods set for direction control |
2 x | Rudder 2_Tray 3~3.5 inch |
1 x | Opto Gas Engine Kill Switch |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Cabling for Fox MDM1 wings |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Battery charging cable XT60 |
2 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Three-position switched channel, short |
1 x | FX three-position switched channel, long |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Multi-adapter balancer JST/C - TP |
2 x | Servo Mount S (red) |
1 x | SPARK Switch 5.9v |
2 x | Engine Kolm BX-155-2 with starter |
1 x | Adapter lead MPX/XT60 |
2 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
2 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
2 x | Servo Bolt M3x6 (8 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Spinner INOVA 45 mm White |
1 x | Size "L" motor holder for class 600 |
1 x | Silencer Ring 7-35 |
1 x | Servo HITEC HS-485 HB |
2 x | F3A carbon 95 mm spinner |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | 57 mm INO spinner (carbon imitation) |
2 x | 75 mm INO spinner (carbon imitation) |
1 x | Servo HITEC HS-225 BB |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
2 x | Exhaust pipe BX 155 Left |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Compact Silencer KOLM BX-155 |
2 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | Rocket D3-P |
1 x | Exhaust pipe BX 155 Right |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Oracover Black 2 m |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Falcon Carbon Spinner 82mm for electric motor |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
2 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Propeller APC 12x6 Glow/Gas |
1 x | CAM-Carbon Light Prop 13x5" (Prop right) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | Servo HITEC D954 TW |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | ESC 40A. Opto starter Kolm |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Servo Bolt M3x8 (8 pcs) |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Ignition KOLM BX-155-2 Engine |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Servo Mount M (blue) |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Horn with ball 40x30 |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
2 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Oracover CARBON Metalic 1 m |
3 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | USB HLS prog. interface |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
2 x | Spinner 82mm Black ventilado |
1 x | Metalic motor holder for class 550-600 |
1 x | A60 Motor Mount Alu complete set |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Hacker A30-S Radial Set |
1 x | Central support Speed 280 |
1 x | Frontal support Speed 400/480 |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
2 x | Servo HITEC HS-5084 MG |
1 x | Servo HITEC HS-55 |
1 x | Servo HITEC HSB-9360TH |
1 x | Propeller APC 16x6 Glow/Gas |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | Spinner INOVA 102 mm Black |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
1 x | Spinner INO 89 mm Chrome (Imitacion metal) |
1 x | Gear set HITEC D645 MW |
1 x | Gear set HITEC HS-85 |
1 x | Servo HITEC HS-325 BB |
|
230,118.94EUR |