1 x | Wing OXY 5,0 m2 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Horn DUBRO 1/2A |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Extra long horn 60x30 |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Interface Realflight Simulator |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Long pinned hinge (12 uds) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Ferrita 27x14x7 mm |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Actuador lineal HLS12-100210-7.4v |
2 x | 18 mm reinforced hinge |
1 x | Indoor hinge with servo arm integraded |
1 x | Round Rod 3,0x1000 mm |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Large flex hinge (12 uds) |
2 x | ABS 500 x 400 x 1 mm (white) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Parachute XTRALITE S |
1 x | Motor A2212/13T |
1 x | ESC ALPHA 60A HV |
1 x | HBC 10035-3 32-Bit |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
2 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | Connectors banna oro 2 mm (M/F) |
3 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
2 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
2 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
2 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
2 x | 90x45 mm hard foam KOVO wheel |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | 60x25 mm tail wheel "type F3A" |
2 x | 76 mm light wheels (2 pcs) |
2 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
2 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
3 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
2 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
2 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
3 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
2 x | 76x24 mm (3.0") Type jets aluminium core wheel |
2 x | 76x23 Ø3.5 mm aluminium core wheel |
2 x | 64x20 mm (2.5") Type jets aluminium core wheel |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | L-39 Albatros 138"/3.5m lenght ARF |
1 x | UHU hart 35 g |
1 x | Horn mando small (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | T-Hose connector 4-4-4mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Film release agent PVA 25 ml |
1 x | Round Rod 1,25x1000 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
2 x | Straightened threaded rod M3 - 1m |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | 10-15mm Servo Arm HITEC |
1 x | Round Rod 6,0x1000 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Servo HITEC HS-125 MG |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Servo BMS-4112 |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Ferrita con funda |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Z-shaped servo mount |
1 x | Strip 3,5x1,75x330 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | HITEC DPC-11 programmer |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Small pinned hinge (12 uds) |
1 x | 11 mm wing servo holder |
1 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | NoNa BB wheel Ø125x35mm in pair |
1 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 110x55 mm SLH KOVO wheel |
1 x | 4 mm Prop Adapter M8 |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | Propeller Pleg CAM Carbon 11x6 |
1 x | Propeller Pleg CAM Carbon 12x11 |
1 x | PU aircraft tyre, 45x16x3 mm |
1 x | 100x50 mm SLH KOVO wheel |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Propeller Pleg CAM Carbon 10.5x6 |
1 x | Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm |
1 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | NoNa BB wheel Ø105x35mm in pair |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
2 x | 120x60 mm SLH KOVO wheel |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Lightweight aircraft wheel, 45x18.5x2 |
2 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | NoNa BB wheel Ø130x40mm in pair |
1 x | Rubber wheel Ø 45mm x 16mm (2pcs) axis Ø 2.1m |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
2 x | 120x60 mm C SLH KOVO wheel |
1 x | SCHARNHORST Battleship 1:200 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
1 x | Wheel ø180 mm AIRTOP Ballon pneumatic |
1 x | 3 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | Propeller APC 12x4.5 MR Electric Pusher |
1 x | Propeller APC 16x5.5 MR |
1 x | Propeller APC 10x4.5 MR |
|
11,827.56EUR |