1 x | SE Ring 330 mm (4 pcs) |
1 x | 20x200 mm battery rings |
1 x | Tape GFK 50 mm |
1 x | Ring 320 mm length (5 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 350 mm (2 pcs) |
2 x | Tape GFK 25 mm |
1 x | Spikes Band (5 m) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | SE Ring 300 mm (2 pcs) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Cinta Goldfix 1m |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Vacuum bag, 1200 mm x 50 m |
4 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
2 x | PIX Hawk with accesories |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Angled clevis with threaded rod M3 |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
4 x | Brass ball links BS M3 V1 (10 pcs) |
2 x | Kwik link AL M3 con Clip (2 pcs) |
3 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
2 x | Slave-cable USB Easy Sim |
1 x | Interface Jack Adapter IKARUS |
1 x | Oracover Yellow CUB 2 m |
1 x | TrainerCord (master-learner) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | 1/12 Pilot "Tom" |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | 1/12 Pilot "Fighter" |
1 x | 22m Fitting barb |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Chopped glass fibre strands 3 mm |
1 x | 1/6 Pilot "Buddy" |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
2 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | Metal clevis M3 (10 uds) |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Wire easy tensioner (red) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Round Rod 1.0x3.5 cm |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Suction funnel for carburetor 90D-M (red) |
2 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | 5 mm M2 variable horn |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Reed valve for DA 50-R |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | bavarianDEMON USB cable |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | DPSI RV Mini 5 (2008) |
2 x | RF9 Flight Simulator with Spektrum Controller |
1 x | GameCommander USB Universal |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Propeller RF CFK 13x6.5 |
1 x | Propeller CFK 18x16 |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 17x13 |
2 x | Propeller CFK 16x13 |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Propeller CFK 15.5x10 |
1 x | Propeller CFK 15x7 |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 14x10 |
1 x | Propeller CFK 15x15 |
1 x | Propeller CFK 12.5x7 |
1 x | Propeller CFK 14x8 |
2 x | Propeller CFK 18,5x12 |
1 x | Motor Mega AC 16/25/04 |
1 x | Motor Mega AC 22/35 4S |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Motor Mega AC 16/30/01 |
1 x | Hot Glue Stick GREEN |
1 x | Motor Mega AC 16/25/04 COMBAT |
2 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Xplorer2 anemometro |
1 x | |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Aero shocks |
1 x | MAMBO 17 |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Spinner 104x131 mm 115 g CFK-BS |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Servo HS-5070 MH Hi Volt |
2 x | AXI 2826/10 V2 Long |
1 x | 8 mm Adapter for AXI53xx |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Cooler motor type 150 |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
1 x | Cable control set |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
2 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Motor Mega AC 16/07/06 |
1 x | 51 mm INO spinner (carbon imitation) |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Spinner INOVA 102 mm Black |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | SERVO DES 588 BB MG |
1 x | KIRA 480-38 |
1 x | Combo RAY C3542-1000 + ESC 60A |
1 x | KIRA 480-34 |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
2 x | Servo NARO Max Std |
1 x | PYRO 700-45 |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | Servo HITEC HS-5087 MH |
1 x | PYRO 800-40 Long Axi |
1 x | Crystal Universal RX 35.140 Ch 74 |
2 x | EasyFLY Addon |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Servo TT ACE SHV 1504 MG |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | KIRA 480-38 5,2:1 |
1 x | PYRO 600-12 |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Servo HITEC D950 TW |
1 x | PPS-4D Propeller |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | KIRA 480-43 |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | PYRO 650-103 Long Axi |
1 x | QUANTUM II 55 Brushless Motor |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | PYRO 750-50L |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | KIRA 400-34 |
1 x | Servo HITEC HS-5485 HB Digi |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | ALU servo arm 3 mm shaft |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Metalic motor holder for class 550-600 |
2 x | AXI 2808/20 V2 |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Receiver bed (Blue) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Motor Advance 30-10 F3A |
1 x | Frontal support Speed 280 |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | AXI 2814/12 V2 |
1 x | AXI 2820/10 V2 |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | Prop Holder AXI 41xx V2 |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | FOAM - CURE™ (24g) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Epoxy 5 min. 500 g (Hardener) |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller POWER-PROP 12x6 |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | FIALA Propeller 18x10 |
1 x | Micro clevis (10 uds) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Rudder forward 90x28 "type Kato" |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Long horn 50x26 |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | EME 55 cc carburetor WALBRO |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | AddCAP 10AS capacitors |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | Extender tip (6 pcs) |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Carbon plate 350x150x4.0 mm |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Microbalon filler for CA glues. Packaging bottle 20g |
1 x | Ciano KAVAN Thin 20g |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | Propeller APC 16x6 Glow/Gas |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | Propeller APC 10x4 Glow/Gas |
1 x | Propeller APC 14x6 Glow/Gas |
1 x | 24x12 prop Super Silence |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | Propeller APC 16x8 Glow/Gas |
1 x | Propeller POWER-PROP 12x8 |
1 x | Propeller POWER-PROP 15x8 |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | 12x6 tree blades propeller |
1 x | 10x7 tree blades propeller |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Propeller hub spacer 8/5.5 |
2 x | AXI 2814/12 V2 Long |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Small adjustable control horn with bearing |
1 x | Short adjustable control horn 3x24 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Small aluminium horn red (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Small aluminium horn gold (2pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Helice APC 14x4 W |
1 x | T-Hose connector 2-2-2 mm |
1 x | Propeller APC 10x4.7 SF |
1 x | Quick hose connector 6-6 mm |
1 x | Propeller 12x6 Falcon electric |
1 x | SAITO FG-36 carburetor |
1 x | Propeller APC 13x4 Electric |
1 x | FESTO Blanking plug G1/8 |
1 x | Propeller APC 14x10 Electric |
1 x | Propeller APC 11x7 SF |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Propeller APC 10x10 Electric |
1 x | Propeller APC 10x7 Electric |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | 51 mm aluminium spinner. |
1 x | 102 mm aluminium spinner |
1 x | 82 mm aluminium spinner. |
1 x | AXI 2826/6 V2 |
1 x | AXI 2217/16 V2 |
1 x | Propeller CFK 12.75x13 |
1 x | 64 mm aluminium spinner |
1 x | Spinner 80 mm GFK |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | AXI 2212/26 V2 |
1 x | AXI 2820/8 V2 |
1 x | AXI 2826/8 V2 |
1 x | Interface Realflight Simulator |
1 x | DC24 II Transmitter case insert |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | AXI 2826/10 V2 |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner 159x200 mm GFK |
1 x | AXI 2820/14 V2 Long |
1 x | Connectors DEANS (T) micro |
1 x | Connectors MPX male |
1 x | AXI 2217/20 V2 |
1 x | Spinner 115 mm GFK |
1 x | Spinner 100 mm GFK |
1 x | 75 mm spinner (Carbon Imitation) |
1 x | MR30 connector male |
1 x | Connectors DEANS (T) |
|
27,436.80EUR |