3 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Surface Indicator Gauge Small |
3 x | Angle of incidence meter |
3 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Angle measurer |
2 x | Propeller balancer |
3 x | Field folding model stand SebArt |
3 x | Field folding model stand |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Medidor ángulos y/o incidencias |
4 x | WingFix ULTRA Black Edition |
2 x | Propeller balancer |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Propeller POWER-PROP 14x9 |
2 x | Stickers-digit for marking |
1 x | Propeller POWER-PROP 13x9 |
1 x | Ferrita 17x10x6.5 mm |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Crimping tool |
1 x | Digital precision scale up to 2000 g |
1 x | Oratex Yellow Cub 10 m |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | AX-60 starters (5 pcs) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | PCARD Wireless System |
1 x | Gear for MICRO BB |
1 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Support Flush MPX Conector (6 pcs) |
2 x | Futaba 20 mm servo arm |
2 x | XTorque CFK Servohebel 38 HITEC 25T |
3 x | Futaba 30 mm servo arm with M3 ball link |
3 x | Servo DITEX TD2612S |
1 x | SERVO DES 568 MG |
4 x | Propeller POWER-PROP 7x7 |
2 x | Futaba 54 mm servo arm with ball link |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Servo HITEC HS-325 BB |
1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Gear set HITEC D645 MW |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo inverter |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | 3,2 mm Prop Adapter M5 |
1 x | Allen wheel collar M4x4 |
1 x | 4 mm Prop Adapter M6 |
1 x | Allen wheel collar M3x3 |
1 x | |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | 6 mm Prop Adapter M8 |
1 x | 12 mm dogdrive props |
1 x | 10 mm dogdrive props |
1 x | Servo NARO Max Std |
2 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Festo Adaptor Tygon Large/4mm |
2 x | Body for landing gear Ø 3 mm |
1 x | Wheel cover holder Ø 5 mm (2 uds) |
3 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | T-Hose connector 4-4-4mm |
2 x | Angled clevis with threaded rod M3 |
2 x | Quick hose connector 4-4 mm |
1 x | Body for landing gear Ø 4 mm |
1 x | 20-25mm Servo Arm |
1 x | ESC MEZON 115 Opto |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Servo SAVOX SW-1250 MG digi |
1 x | Adapter rotula M3 |
1 x | Servo DITEX EL0510M |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Hitec 30 mm servo rounded arm |
2 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Hitec 38 mm servo arm with ball link |
2 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Futaba 25 mm servo arm with ball link |
2 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
2 x | HITEC 17 mm servo arm with ball link HITEC |
2 x | Futaba 30 mm servo rounded arm |
2 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
2 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Piñones SAVOX SH-0350 |
1 x | Servo SAVOX SA-1258 TG |
1 x | Servo SAVOX SV-1270 TG |
1 x | Conector MT-60 (pair) |
1 x | Ball Bearing Oil 25 ml |
1 x | Servo FUTABA SBL 471 SV |
1 x | Servo FUTABA BLS175 SV |
1 x | Servo FUTABA BLS 276SV |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | BETA 1400 ARF Red |
1 x | |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Spinner 40 mm Black (Kavan) |
1 x | Ciano KAVAN Medium 20g |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Mudguard wheels 112/127 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Engine mounts for .09 - .19 engine |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | SKY RC T400Q Charger 4x100w |
1 x | Compact on-board starting system (9525) |
2 x | Z-shaped servo mount |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Y-Hose connector 2-2-2 mm |
1 x | Air pressure gauge |
1 x | Quick hose connector 3-3 mm |
2 x | Landing gear axle Ø 4 mm (2 uds) |
2 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Faucet FESTO |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Landing gear strap small (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | T-Hose connector 3-3-3 mm |
1 x | Ferrita 27x14x7 mm |
1 x | KAVAN Hand crank fuel pump |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Servo FUTABA BLS 272SV |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Servo FUTABA S 9670 SV |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Futaba BLS152 - Upper Case |
1 x | Servo FUTABA BLS173 SV |
1 x | Programador FUTABA USB CIU-3 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Servo Mount M (blue) |
1 x | Reflector 18 mm (2 pcs) |
1 x | Combo lighting module with covering drop shape |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Quick hose connector 6-6 mm |
1 x | Conector MR-60 (pareja) |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | T-Hose connector 2-2-2 mm |
1 x | T-Hose connector 3-3-3 mm |
2 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Landing gear strap medium (4 uds) |
1 x | Tap FESTO 4-4 mm |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Landing gear strap large (4 uds) |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Racor 4/6 mm |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
2 x | Oracover light Grey 2m |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Hitec 38 mm servo arm |
1 x | 6 mm Prop Adapter M8 |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Release wax 250ml |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Racor "Y" 3 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | CA Glue fast 20g |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
2 x | 3 mm Short Prop Adapter M5 |
1 x | Prop shaft ZG 23SL and ZG 26SC |
1 x | Prop Holder AXI 41xx V2 |
1 x | Oracover Black 10 m |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Oracover GREY Seafire Sea 2m |
1 x | CA Glue (medium) 20g |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Servo safety connector (10 pcs) |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | 5 mm Prop Adapter M8 |
1 x | 3 mm Long Prop Adapter M5 |
1 x | 10 mm Prop Adapter M12 |
1 x | 4 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
|
10,968.76EUR |