1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | PIX Hawk with accesories |
1 x | PPM Encoder Module |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Oracover Yellow CADMIO 2 m |
1 x | Ply-Span 450x600/13g Black |
1 x | Oracover Azul 2 m |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Oracover Red 2 m |
1 x | Oratex Silver 2m |
1 x | Steering arm 16 mm Ø 3 mm |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Oracover Yellow CUB 2 m |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Oratex Natural White 20m |
1 x | Oracover ROYAL RED 2m |
1 x | Canopy Latch |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
4 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | ORACOVER transparent Yellow (10 m) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Ply-Span 450x600/13g Red |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Oracover White 2 m |
1 x | Ply-Span 450x600/13g White |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Oracover Azul Cielo 2 m |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | One touch canopy lock |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Oratex Red Fokker 10 m |
1 x | Oracover White 10 m |
1 x | Oracover CARBON Metalic 1 m |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Oracover Green10 m |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | XH female balance (3S) connector (2 pcs) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Connectors DEANS (T) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Optotronix Aurora Plug |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Conector Servo female 4 pines |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | XH female balance (2S) connector (2 pcs) |
2 x | XH male balance (5S) connector (2 pcs) |
2 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Conector BEC male (10 pcs) |
1 x | Connector CAN 15 |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
2 x | Connectors banna oro 6,0 mm (M/F) |
2 x | 30 cm DEANS female connector |
1 x | Propeller POWER-PROP 14x9 |
1 x | Propeller POWER-PROP 13x9 |
1 x | 800TVL CMOS camera for FPV |
2 x | Gold antispark 5,5 mm plug |
2 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | EasyFLY Addon |
2 x | SIMtransmitter 6 Mode 2 |
1 x | Interface Jack Adapter IKARUS |
1 x | Slave-cable USB Easy Sim |
1 x | Interface Realflight Simulator |
3 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Horn 5/10 with M2 Bearing |
2 x | Cable control set |
3 x | Horn with ball 55x40 |
2 x | 6 mm red aluminium threaded horn with patella |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | LH long aluminium horn L31xH30 (2pcs) |
3 x | Horn 5/20 with M2 Bearing |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | 6 mm aluminium horn with patella |
2 x | Small aluminium horn red (2pcs) |
2 x | Horn 6/27 with M3 Bearing |
1 x | Tube Pitot to PIXHAWK |
1 x | 1/6 Pilot "Tony" |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Snap short M2 (10 uds) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | XH male balance (3S) connector (2 pcs) |
1 x | Cockpit aluminium closing |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Extra long horn 60x30 |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
2 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
2 x | Window mounting channel 5m |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Servo FUTABA SBL 471 SV |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Servo BLUE Bird BLS-H71B v2 |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Crimping tool |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | SERVO DES 806 Pignons |
1 x | SERVO DES 707 BB MG |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
2 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | SERVO DES 568 MG |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | Servo BLS-M55B 61.2kg |
1 x | MIG 29 3D RTF, Servo |
2 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Aluminium servo arm (2 uds) |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | 2,5x60 mm allen screwdriver |
1 x | Copier 5x20 cm pcs |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Copier 2x20 cm pcs |
1 x | 2,0x50 mm allen screwdriver |
2 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Cut tube |
1 x | Dean-T Plug Mold |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | |
1 x | 1,5x50 mm allen screwdriver |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Dremel 3000 130W |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Servo FUTABA BLS 272SV |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Servo MKS 6100 DS |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
2 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Servo HBS 690BB HV Digital |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Adaptadores carga 6s JST-XH |
1 x | Fast attachment for servos (25 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Connectors MPX male |
1 x | Connectors MPX male (PIN double) |
1 x | Connectors MPX black male |
1 x | Carbon plate 350x150x3.0 mm |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Dremel PERMAGRIT 18 mm round lime |
2 x | Horn with ball 40x30 |
1 x | 6 mm M3 variable horn |
1 x | Long horn 50x26 |
1 x | Control horn long w/ball |
1 x | Adjustable brass horn threaded M3 |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn mando small (2 pcs) |
3 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | 140 mm rods set for direction control |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Allen wheel collar M3x3 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | SUS wire 3m (nylon coated) |
1 x | 45 mm rods set for direction control |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | CARBON CUB 15cc ARF 2280 mm |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | PT 20x13 EL Propeller |
1 x | Neck strap JETI DC |
1 x | Bidule 55 V3 2460 mm |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
2 x | Handle for PERMAGRIT lime |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Hot Glue Stick RED |
2 x | Precision wrench L100 mm |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | Starter EM Gear Power 250 |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Sealing Iron Sleeve PROF |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Hot Glue Stick BLACK |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Conector MT-60 (pair) |
1 x | Mounting frame MPX female connector |
1 x | Connectors MPX female |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Extension MPX-MPX 20 cm |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | Servo FUTABA BLS173 SV |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | DSM 10 Dual Switch Mixer |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Hand Pads for Tray JETI |
1 x | Oracover Black 10 m |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Vacuum pump 12 CFM |
1 x | XT-60 Plug Mold |
2 x | Tool for entel |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Z Bender - S Type Tool |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Steel brush wheel with 2.35mm |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Mini Infrared Thermomiter |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Mold plugs XT-90 |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Heli blades angle measurer |
1 x | Tube bender |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Roller cutter 28 mm |
1 x | Tachometer Hyperion Multi-pala |
1 x | Dust collector for mould cleaning |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Sub-D Plug Mold |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | ULTRA STICK 10 cc ARF |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | MPX Support |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Contacto macho pin conector (10 pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Horn 5/15 with M2 Bearing |
2 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Pistola termica MH 550 micro |
1 x | 20 mm carbon horn |
1 x | RH long aluminium horn (2pcs) |
1 x | Cable with accesories |
1 x | Regulador Jeti Jes 045 |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn 6/35 with M3 Bearing |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
|
16,332.94EUR |