2 x | Horn 5/15 with M2 Bearing |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Small aluminium horn blue (2pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Mould Resin P 10 kg |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Horn 6/20 with M3 Bearing |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
2 x | LH long aluminium horn L31xH30 (2pcs) |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | Hardener P-25, canister 2.5Kg |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
2 x | 20 mm carbon horn |
2 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Small aluminium horn gold (2pcs) |
1 x | Cable with accesories |
2 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
2 x | Horn 20x28,5 mm (2 pcs) |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | One touch canopy lock |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support pump Xicoy X45 |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Release wax 250ml |
1 x | Adjustable brass horn threaded M3 |
1 x | 5 mm M2 variable inclined horn |
2 x | 5 mm M2 variable horn |
1 x | Horn mando long (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Micro control horn T2 Ø 1 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Horns indoor |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
2 x | Extra long horn 60x30 |
2 x | Hardener Aero EPH 161 (250 g) |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Horn with ball 55x40 |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | L-shaped servo mount |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Servo Connector Brackets (10 pcs) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
2 x | Servo TT ACE SHV 1504 MG |
2 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | CA Glue fast 20g |
1 x | Universal Colour Paste deep black 50 g |
1 x | CA Glue (medium) 20g |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Film release agent PVA 25 ml |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Red 4 mm connector holder |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Universal Colour Paste deep black 250 g |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Motor Mega AC 16/07/08 |
1 x | KIRA 400-39 5,2:1 |
1 x | Motor Mega AC 16/15/08 |
1 x | Mega Motor RC 400 F5J 1950KV |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Horn for flap control (1 pcs) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Servo GO-02 Digital 1.8g |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | KIRA 500-36 6,7:1 |
1 x | KIRA 480-38 5,2:1 |
1 x | MAMBO 17 |
1 x | KIRA FAI 5F5/4s |
1 x | KIRA 480-34 5,2:1 |
1 x | KIRA 480-43 |
1 x | KIRA 500-30 6,7:1 |
1 x | Motor Mega AC 16/25/04 COMBAT |
1 x | Motor Mega AC 16/15/03 |
1 x | Motor Mega AC 16/30/01 |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Motor Mega AC 16/15/02 |
1 x | Motor Mega AC 16/25/03 |
1 x | KIRA 600-20 6,7:1 |
1 x | KIRA 500-26 6,7:1 |
1 x | PYRO 900-52L |
1 x | KIRA 400-27 |
1 x | KIRA 480-43 5,2:1 |
1 x | KIRA 600-24 6,7:1 |
1 x | Horn with ball 40x30 |
1 x | Horn 5/20 with M2 Bearing |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Adapter rotula M3 |
1 x | Rocket D9-7 |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | XPower XC4226/12 LS |
1 x | Gear for MICRO BB |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Gear for D 54 |
1 x | wire tensioner (silver) |
1 x | 5 mm Prop Adapter M8 |
1 x | Stick coupler Ms 15 mm |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Rudder forward 90x28 "type Kato" |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Z-shaped servo mount |
1 x | Servo holder for retract |
1 x | Optical RPM Sensor |
1 x | DYNAMOMETER S-1580 |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | Transmitter SPEKTRUM DX-9 (Only TX) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Aero-Master (Aero-naut) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 4 mm Prop Adapter M8 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 2 mm Prop Adapter M6 |
1 x | Round Rod 1.0x3.5 cm |
1 x | SCHARNHORST accessories |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | wire tensioner (blue) |
1 x | 3,2 mm Prop Adapter M8 |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Tail boom brace LOGO 480 |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | VBar Control Touch, midnight black |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
|
13,456.07EUR |