1 x | Regulador Jeti Jes 045 |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | Pin hinge 34x16 mm (10 uds) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Gates hinge aluminium (1 pcs) |
4 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | Shirt Hispano Aviación |
1 x | Softshell Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | Cap Hispano Aviación |
1 x | 1/10 Pilot "Jack" |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Tape GFK 38 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Parachute PV6 for F3J |
1 x | Smoke set "M" |
2 x | Trailing leg 131 mm |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
5 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Retract undercarriage |
2 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Servo FUTABA BLS173 SV |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Servo HITEC D131 MW nano |
2 x | 15 mm reinforced hinge |
1 x | Programador FUTABA USB CIU-3 |
1 x | Indoor hinge with servo arm integraded |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Servo HITEC HS-225 MG |
1 x | Servo HITEC HS-45 HB |
1 x | Servo HBS 690BB HV Digital |
1 x | Small pinned hinge (6 uds) |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | 18 mm reinforced hinge |
1 x | SERVO DES 568 MG |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | USB Mini Camera endoscope |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Servo HITEC D950 TW |
2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Servo HITEC D145 SW |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Gear set HITEC HS-7950TH |
1 x | Small pinned hinge (12 uds) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Servo BMS-4112 |
1 x | Micro flex hinge (12 uds) |
1 x | Servo HITEC D85 MG |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Gear set HITEC HS-55 |
2 x | Round flex hinge (12 uds) |
1 x | SERVO DES 806 Pignons |
1 x | Long pinned hinge (12 uds) |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Landing gear strap large (4 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Mudguard for 140/165 mm wheels |
1 x | 150 Newtons FEMA absorber |
2 x | Brake for 140 mm wheels |
1 x | Landing gear strap medium (4 uds) |
1 x | 40 mm air cylinder |
1 x | Quick hose connector 4-4 mm |
3 x | Angled clevis with threaded rod M3 |
2 x | Absorver mount set for 5-10 Kg models |
3 x | Metal ring front FEMA |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Mudguard wheels 112/127 mm |
2 x | Wheel FEMA 165 mm / 8 mm |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Landing gear axle Ø 8 mm (2 uds) |
3 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
2 x | 400 Newtons FEMA absorber |
4 x | Gearwheel 9724/09 for ZG 45 |
1 x | Compact on-board starting system (9713) |
1 x | Compact on-board starting system (9724) |
1 x | Compact on-board starting system (9715) |
1 x | Wheel FEMA 178 mm / 8 mm |
2 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
3 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Landing gear axle Ø 6 mm (2 uds) |
2 x | 200 Newtons FEMA absorber |
2 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | 100 Newtons FEMA absorber |
2 x | Compact on-board starting system (9525) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Axle wheel with accesories |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
2 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Servo SAVOX SH 0257 MG |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | Rudder 107-06 |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Motor mount for 1 m models |
1 x | Cooler motor type 400 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Central support Speed 600 |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | RX external cable for estandar receivers |
1 x | 800TVL CMOS camera for FPV |
1 x | Pilot "Goose" (Slimline) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Servo FUTABA BLS 276SV |
1 x | Air pressure gauge |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Propeller 9x7 SlowFlyer |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | 20x15 Falcon electric V2 |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Servoarm SH-81, two sides, aluminium |
1 x | Servo SAVOX SA-1256 TG |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | Kardan Black (without pinions) |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Motor holder AXI |
1 x | A50 Motor Mount Alu complete set |
1 x | Hacker A30-S Radial Set |
1 x | Cables suitable for the motor AC 28/7 |
1 x | A60 Motor Mount Alu complete set |
1 x | Bearings for motor HACKER C50 |
1 x | Fiberglass motor-holder for electric motors |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Size "L" motor holder for class 600 |
1 x | Baseplate servo |
1 x | Cooler motor type 150 |
1 x | Motor Mount for Multiplex FunJet |
1 x | Cooler motor type 280 |
1 x | Electric coversion set |
1 x | 10 mm gas motor standoff |
1 x | Motor mount M |
1 x | Metalic motor holder for class 550-600 |
1 x | Size "M" motor holder for class 400 |
1 x | RX cabel |
1 x | Size "M" motor holder for class 400 |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | |
1 x | Fan for A60 |
1 x | Fiberglass motor-holder for electric motors |
1 x | Motor holder for AC 28/7 |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Futaba BLS152 - Upper Case |
1 x | Large flex hinge (12 uds) |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Servo FUTABA SBL 471 SV |
1 x | Program Card G2 RAY |
1 x | Tool for entel |
1 x | SIMtransmitter 6 Mode 2 |
2 x | Wheel FEMA 112 mm / 6 mm |
1 x | Receiver R6008HV-A comatible FUTABA |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | L-shaped servo mount |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Receptor MINIMA 6S HITEC |
1 x | Wingstabi 9 DR M-Link Receiver |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | Servo arm with 5 mm hole to FEMA 9810A |
2 x | Wheel FEMA 100 mm / 6 mm |
2 x | 300 Newtons FEMA absorber |
1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
1 x | JETI Counter for DC-16 (Blue) |
1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
1 x | Harness for transmitter JETI DUPLEX |
1 x | Tarjeta programadora RAY G2 |
1 x | FOXY G2 C3530-700 |
1 x | BEC 3A FOXY |
1 x | ESC RAY G2 R-20B BEC |
1 x | Z-shaped servo mount |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
|
15,223.40EUR |