251.91EUR

Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
[POWER1010/10000]


Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x USBCOM 5i
1 x Angled clevis with threaded rod M3
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Blind nut M5 (4 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Foil for sticking flaps and ailerons
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
3 x BALSA trip 8.0x8.0x1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
2 x Balsa panel 2.0x100x1000 mm
1 x Spinner propeller pleg. 30 mm / 3,0 mm
1 x Horn for flap control (1 pcs)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Brass control horn M2 long for wire (10pcs)
1 x CC 03
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Adapter lead MPX/XT60
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Spinner propeller pleg. 45 mm / 6,0 mm
1 x Dean "T" - Futaba Adapter
1 x 2 LiPo XH>EH adapter
1 x ORACOVER Ferrari red (2 m)
1 x Horn 6/35 with M3 Bearing
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x Cabel charger transmitter GRAUPNER
1 x BALSA trip 5.0x5.0x1000 mm
1 x Spinner propeller pleg. 32 mm / 6,0 mm
1 x BALSA triangular 10x10x1000 mm
1 x Prop rubber XS set 4 pieces
1 x Propeller balancer
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x ABS tube 6.0x5.0x1000 mm
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x 1/10 Pilot "Jack"
2 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Aluminum Fold Prop Spinner 40 mm / 5mm
1 x 1/6 Pilot "Garry"
1 x Long ball link M1.6 (6 uds)
1 x Extinguisher CO2 - 2 Kg
1 x Piloto jet 130 mm
1 x Socket head ball link M3 (2 uds)
1 x SIMtransmitter 6 Mode 2
1 x Aluminum Fold Prop Spinner 30 mm / 5.0 mm
1 x 1/4 Pilot "Mike"
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Towing hook
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Socket Head Screw M2x8
1 x Tapping Screw M2.9x9.5 (10 pcs)
1 x Socket Screw M2x3 mm (4 pcs)
1 x Parachute XTRALITE S
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Quicklock washer 3.5 mm (10 pcs)
1 x M3 black washers (4 pcs)
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Flat washer 1.7 mm (20 pcs)
1 x Horn 6/27 with M3 Bearing
1 x Horn 16,5x20 mm (2 pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Horn mando small (2 pcs)
1 x 6 mm M3 variable inclined horn
1 x Balsa panel 5.0x100x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Locking cable tie 2.5x100 (uds)
1 x Steering arm 16 mm Ø 4 mm
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Canopy Latch
1,586.51EUR
Manufacturers
Languages
Español English
Currencies