Top » Catalog » Hardware » Cables » POWER1010/1000

26.00EUR

Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
[POWER1010/1000]

Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation

few units

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	TWIST planeador gomas
2 x	Bird (Aero-naut)
1 x	Motor DLE 200cc Std
1 x	Big Crow DLE-170M
1 x	Motor DLE 430 cc - Paramotors
2 x	Silent-blocks DLE 170M
1 x	Motor DLE 200cc Premium Muffler
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Small Crow DLE-170M
1 x	Joint with bearing M2,5 22x5,5
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Glases Stratus
1 x	Cockpit plastic closing
2 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Extension silicon 10 cm (Futaba)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Canopy Latch
1 x	30 cm BEC cable (female)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Extension 100 cm (Futaba)
1 x	Glases Flitemaster
1 x	1/12 Pilot "Cougar"
2 x	CC 01
1 x	Extension PVC 150 cm (Graupner)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Horn 5/10 with M2 Bearing
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Horn for flap control (1 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Spannlack 1000 ml
1 x	20 g tin paste
2 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Spray adhesive AEROFIX 2
1 x	ABS tube 7.0x5.0x1000 mm
2 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Vacuum pump P1-N
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Screwdriver for Hexagon 1,27mm
1 x	Starter EM Gear Power 80
1 x	Hot Glue Stick RED
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	T-Motor U7-V2.0 Kv420
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x
1 x	CC 02
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	CC 05
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Porta Kwik link M4 4 mm (2 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Extension 5 lipos JST/C
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	DPSI magnetic switch actuator (housing)
1 x	Brake for 140 mm wheels
1 x	Kit hydraulic brake
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Program 5v SIO RS 232
1 x	9x4.7 * 22x12 carbon propeller
1 x	Ferrita 17x10x6.5 mm
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	2 LiPo XH>EH adapter
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	BEC 3A FOXY
1 x	USB HLS prog. interface
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	5 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Cabel charger transmitter GRAUPNER
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Pulley brass 14/2 (2 pcs)
1 x	Threaded coupler M2 (10 pcs)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	3 LiPo XH>EH adapter
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	30 cm BEC cable (male)
1 x	Pulley brass 8/2 (2 pcs)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Dean "T" - Futaba Adapter
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Adapter lead MPX/EC3
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Battery charging cable XT60
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	4 LiPo XH>EH adapter
1 x	Kwik link with arm M5xM2,5xL30
1 x	Kwik link with arm M3xM2xL24
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	TrainerCord (master-learner)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Extension 2/3 lipos JST - JST/C
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Extension 6 lipos XH > EH
1 x	MEKP Harderner 100 g
1 x	PowerBox SparkSwitch RS
1 x	SWTU2 switch
1 x	Extension 5 lipos JST - JST/C
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	MAX BEC 2
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	SBEC Jeti
1 x	Interruptor RX/Batterie
1 x	Male Prolonger TP 4/5S
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Switc electronic 30 Amp
1 x	Opto Gas Engine Kill Switch
1 x	Extension 5 lipos JST/C - JST
1 x	Multi-adapter balancer JST/C - TP
1 x	Long Switch On/Off micro
1 x	Extension 2/3 lipos JST/C
1 x	Magnetic Interruptor MULTIPLEX
1 x	MAX BEC
1 x	SBEC 40
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	MAX BEC 2D plus EX
1 x	Hardener Aero EPH 161 (500 g)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	PSC 6
1 x	Hardener P-25, canister 2.5Kg

16,725.44EUR