126.00EUR

Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
[POWER1010/5000]


Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Xplorer1 anemometro
1 x Xplorer2 anemometro
1 x Screws flush mount M2
1 x Side Plate
1 x Ball link M3 (10 pcs, flat ball)
1 x Long ball link M1.6 (6 uds)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Short ball link M1.6 (6 uds)
1 x CM-3
1 x Linden wood slat 3.0x3.0x1000 mm
1 x 6,4x1000 mm 2:1 blue termoretract tube
1 x Short ball link M2 (6 uds)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 4 LiPo XH>EH adapter
1 x M3 Maxi ball link (2 uds)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Flat washer 1.7 mm (20 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Extractor piñones 2.3/3.2 mm
1 x SE Ring 450 mm (2 pcs)
1 x Long pinned hinge (12 uds)
1 x Long pinned hinge (6 uds)
1 x Aluminium wide washer M3 red (4 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 250 mm (2 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Strip 3,5x1,75x330 mm
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Hardener Aero EPH 161 (250 g)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Silicone red 0,25 mm² wire (25 m)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x 10m servo "Premium" wire (white/red/blue)
1 x PPM Encoder Module
1 x Blade holder lower
1 x Rotorshape Elevator
1 x Screws M1,6x6 Allen
1 x Head spacer
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x M3 Maxi ball link (2 uds)
1 x 3 blades set
1 x Support Antena 2.4 Ghz (2 pcs)
1 x 
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Vacuum bag, 1200 mm x 50 m
1 x M3 Maxi ball link (2 uds)
1 x Pine wood slat 6.0x6.0x1000 mm
1 x TS832 to Gopro AV/Power Cable
1 x Hardener Aero EPH 161 (500 g)
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x BALSA trip 4.0x4.0x1000 mm
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Tube support Ø 6mm (10 pcs)
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Oracover Black 10 m
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x CC 03
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Flat washer 3.2 mm (20 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Foil for sticking flaps and ailerons
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Lock washer 3.2 mm (20 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Round Rod 3,0x1000 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Threaded coupler M2 (10 uds)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Jeti Black cap
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x resin-hardener package L-385 with hardener H-385
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
2,466.46EUR
Manufacturers
Languages
Español English
Currencies