126.00EUR

Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
[POWER1010/5000]


Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Double conector with JR adapter and 200 mm extension
1 x CC 03
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Connector Sub-D 2+5 Female
1 x 30 cm BEC cable (male)
2 x 2 LiPo XH>EH adapter
2 x CM-3
2 x 30 cm BEC cable (female)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Copper lacquer wire Ø0,2 mm (5 m)
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x Connector CAN 15
1 x CC 05
1 x 5 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Dean "T" - Futaba Adapter
1 x 3 LiPo XH>EH adapter
1 x 4 LiPo XH>EH adapter
2 x DPS Switch JR/JR
2 x Connector Sub-D 2+5 Male
1 x Oracover White 2 m
1 x Oracover Yellow CUB 10 m
1 x Ply-Span 450x600/13g Red
3 x MYLAR film A350 (1000x500 mm)
2 x Ply-Span 450x600/13g Orange
1 x ORACOVER Ferrari red (2 m)
2 x Oracover CARBON Metalic 1 m
1 x Oracover Green10 m
1 x Ply-Span 450x600/13g Black
1 x Oratex Antik 2m
1 x ORACOVER Fluor red (2 m)
1 x Oracover CHROME 2m
1 x Oracover Azul Cielo 2 m
1 x PROFICOVER 5m
1 x Oracover ROYAL RED 2m
1 x Oracover Black 2 m
1 x Adapter lead MPX/EC3
1 x Cabel charger transmitter GRAUPNER
1 x Circlick securite
1 x DPSI Ampere battery backer
1 x Cabling for Fox MDM1 wings
1 x 10m servo "Premium" wire (white/red/blue)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Extension MPX-MPX 20 cm
1 x Protective Cover for wires Ø 6 mm 1000 mm
2 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Cable set PREMIUM, fuselage/wing
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Black silicone 0,25 mm² wire (25 m)
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Brass control horn M2 short for wire (2 pcs)
1 x Horn 13,5x16 mm (2 pcs)
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 100 cm (Graupner)
1 x Extension silicon 100 cm (Futaba)
1 x Cabel "Y" 30 cm (Futaba)
1 x 5 mm M2 variable horn
1 x Horn 6/20 with M3 Bearing
1 x 6 mm M3 variable horn
1 x Cabel "Y" 30 cm (graupner)
1 x Extension 15 cm (Futaba)
1 x Extra long horn 60x30
1 x Control horn long w/ball
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Optical RPM Sensor
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x 6 mm aluminium horn with patella
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Extension lead 15 cm Multiplex
1 x Horn mando long (2 pcs)
1 x Extension silicon 50 cm (Futaba)
1 x Extension silicon 30 cm female (Futaba)
1 x DYNAMOMETER S-1580
1 x Extension silicon 10 cm (Futaba)
1 x Extension 7.5 cm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Brass control horn M2 long for wire (10pcs)
1 x Cabel "Y" 15 cm
1 x 5 mm M2 variable inclined horn
1 x Cable S.BUS 3 salidas 100 mm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension PVC 150 cm (Graupner)
1 x Extension silicon 75 cm (Futaba)
1 x Extension silicon 50 cm (Graupner)
1 x Adjustable brass horn threaded M3
1 x Electronic switch JETI SP6 0-15v/6A
1 x Connectors banna gold 5,5 mm (M/F)
1 x Servo slow down unit (0,7-14,7 sec )
1 x Fixed launching hook
1 x ABS Strip 1.5x6.0x1000 mm
1 x SBEC Jeti
3 x TP/TopFuel - XH 2/3S Adapter
1 x SPARK Switch 7.4v
1 x UBEC 6A KAVAN
1 x USBCOM 5i
1 x Heat sink for Optotronix LEDs
1 x DPSI RV Mini 6 Magic
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x Filter Capacitor JR
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x 37 mm PVC transparent battery termo-retract (1 m)
2 x Oracover Brown 2 m
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x SBEC 40
1 x Opto Gas Engine Kill Switch
1 x Monokote ROJO misil (1.8x0.65m)
1 x PowerBox SparkSwitch RS
1 x Oracover GREY Seafire Sea 2m
1 x USB interface ALTIS
1 x Ply-Span 450x600/13g Yellow
1 x Prolonguer for Balancer Thunder Power 6S
1 x MAX BEC 2D plus EX
1 x Short Switch On/Off micro
1 x Oratex Natural White 20m
1 x PSC 6
1 x Oratex White 2m
1 x Oracover Orange 2 m
1 x SPARK Switch 5.9v
1 x Switc electronic 30 Amp
1 x Opto Gas Engine Kill Switch
1 x Oratex Natural White 2m
1 x USB HLS prog. interface
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Male connector for 12 pines AWG
1 x Electronic switch JETI SP06 Opto
1 x Jodel D.9 BeBe 2.400 mm Kit
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x EWC6 40 cm wing connector
1 x Extension 2/3 lipos JST - JST/C
1 x EWC3 40 cm wing connector
1 x Extension 5 lipos JST/C - JST
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Extension 5 lipos JST - JST/C
1 x CC 11 Conector
1 x 8 mm Adapter for AXI53xx
1 x Frontal Adapter for AXI53xx
1 x Stickers-digit for marking
1 x EWC3 100 cm wing connector
1 x Extension 6 lipos XH > EH
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
5,908.33EUR
Manufacturers
Languages
Español English
Currencies