Top » Catalog » Hardware » Cables » POWER1010/1000

26.00EUR

Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
[POWER1010/1000]

Product description
The Premium™ MAXI servo cable is the thicker variant of the familiar Premium™ cable with a conductor cross-section of 0.35mm². In this case ‘thicker’ means that the current-bearing positive and negative conductors have a cross-sectional area of 0.5mm², while the signal conductor’s cross-section is 0.3mm² in order to save weight. This makes the Premium™ Plus cable ideal for installations where relatively long leads have to be deployed in the wing or fuselage for high-performance servos.
This insulation produces a weight reduction of about 30% compared with the conventional PVC.
For comparison: in spite of its larger cross-section, the 0.5 mm² Premium MAXI cable offered here is lighter than standard 0.25 mm² PVC cable.
The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.
PowerBox Premium MAXI cable is available loose or in bundles. If you need different lengths, please contact us for a quote.

Características
2x 0.5mm² cross section (red and blue)
1x 0.3mm² cross section (white)
30% weight saving
only 14g/m
fire resistant
robust isolation
employed in full-size aviation

few units

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1023MG 7.0 kg.cm 0.09s/60º
47.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	20 mm carbon horn
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Clip mini fixing for wing (2 pcs)
2 x	Horn with ball 55x40
1 x	Brass control horn M4 short for wire (10pcs)
1 x	5 mm M2 variable horn
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Horn 6/35 with M3 Bearing
2 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Horn mando long (2 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Allen wheel collar M3x3
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Control horn long w/ball
1 x	Horn mando small (2 pcs)
1 x	Adjustable brass horn threaded M3
2 x	Cable grommet Ø 4 mm (4 uds)
1 x	100 mm rods set for direction control
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Allen wheel collar M3x5
1 x	38x4,5 mm wires output (2 pcs)
1 x	Cable control set
1 x	90 mm rods + T patellas set for direction control
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
2 x	Cable grommet Ø 5 mm (4 uds)
1 x	5 mm M2 variable inclined horn
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Horn for flap control (1 pcs)
1 x	Canopy Latch
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
2 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Extra long horn 60x30
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Horn 6/20 with M3 Bearing
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Cable with accesories
2 x	Allen wheel collar M4x4
1 x	6 mm M3 variable horn
1 x	45 mm rods set for direction control
1 x	Cable tie mounts 4.3 (4 uds)
1 x	11 mm Rubber pads (14 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	100 mm rods + T patellas set for direction control
1 x	140 mm rods + T patellas set for direction control
1 x	Horn 13,5x16 mm (2 pcs)
1 x	6 mm M3 variable inclined horn
1 x	Horn DUBRO 1/2A
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Cockpit aluminium closing
1 x	Horn 5/10 with M2 Bearing
1 x	Horn 5/20 with M2 Bearing
1 x	Horn with ball 40x30
1 x	6 mm aluminium horn with patella
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Foil for sticking flaps and ailerons
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Marker ties (20 pcs)
1 x	Tape GFK 50 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	20x200 mm battery rings
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Conector BEC male (10 pcs)
1 x	Conector MR-60 (pareja)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Conector XT-30 (hembra)
1 x	Conector XT-30 (macho)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Conector JR Servo male (50 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Landing gear frontal support 29x26x13,5
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	28x5 mm wires output (2 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Lead with adhesive (2 pcs)
1 x	Control for forward wheel (MINI)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Split pin 1x8 mm (10 uds)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Locking cable tie 2.5x100 (uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Snap pin for micro clevis (10 uds)
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Steering arm 16 mm Ø 4 mm
1 x	Xplorer1 anemometro
1 x	Xplorer4 anemometro
1 x	Xplorer3 anemometro
1 x	1/6 Pilot "Garry"

1,033.11EUR