1 x | Adjustable launching hook |
1 x | Towing hook <3m |
1 x | Tow hook for tug |
1 x | Towing hook |
2 x | Ventus 1:4 set of instruments |
1 x | SUS wire 3m (nylon coated) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Canopy Latch |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | One touch canopy lock |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
3 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Cockpit plastic closing |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | DPSI magnetic switch actuator (housing) |
1 x | CM-3 |
1 x | 3 LiPo XH>EH adapter |
1 x | 30 cm BEC cable (male) |
1 x | Dean "T" - Futaba Adapter |
1 x | 5 LiPo XH>EH adapter |
1 x | Adapter lead MPX/EC3 |
2 x | CC 02 |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | CC 01 |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Double conector with JR adapter and 200 mm extension |
2 x | 2 LiPo XH>EH adapter |
1 x | BEC 3A FOXY |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Circlick securite |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Connector CAN 15 |
1 x | Connector Sub-D 2+5 Male |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Jeti Black cap |
1 x | CC 03 |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Horn with ball 40x30 |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | E-FUN BUG (ROI-Import) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | X-RAY Micro QR (Elevator) |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | DINO Glider ARC |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Glider KNIRPS |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Tip wing protector 30x10 (2 pcs) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | BABY glider (Aero-naut) |
1 x | Glider STROLCH |
1 x | Chili F3K 2 wing servo mounted |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
3 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | X-RAY Micro QR (Rudder) |
1 x | Lead with adhesive (2 pcs) |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
3 x | Birch plywood plate 600x300x4.0 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | LO 100 ARC 3.3m |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | Oracover CHROME 2m |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | PowerBox SparkSwitch RS |
1 x | Extension 6 lipos XH > EH |
1 x | SBEC 40 |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Birch plywood plate 600x300x3.0 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | POLARON EX 800w charger |
2 x | Charger LiPo Charger4 |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
3 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
2 x | Surprise XII Rudder (Freudenthaler) |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Adapter 3,0 mm M6 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Allen wheel collar M3x5 |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Allen wheel collar M4x6 |
1 x | 45 mm gas motor standoff |
1 x | 10 mm floating pad (72 pcs) |
1 x | 4 mm Prop Adapter M6 |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Spring Clip Ø25 mm |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Extension MPX-MPX 20 cm |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Ply-Span 450x600/13g Black |
1 x | SIG Coverall 1.2x1.8 m |
1 x | SPS 70V 140/280 A |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Selfstart electronic switch |
2 x | PSC 5 |
1 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | Male Prolonger TP 4/5S |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 13x4 Electric |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | Propeller APC 12x3.8 SF |
1 x | Propeller APC 10x6 Electric |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | Propeller APC 12x10 Electric |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Propeller APC 11x10 Electric |
1 x | Propeller APC 10x4 Glow/Gas |
1 x | Propeller APC 11x8 Electric |
1 x | Blades 330mm |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | SIG Coverall 1.2x4.5 m |
1 x | Oratex Silver 2m |
1 x | Oratex White 2m |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | Oratex Natural White 20m |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Extension 5 lipos JST - JST/C |
1 x | Extension 5 lipos JST/C |
1 x | Interruptor RX/Batterie |
1 x | MAX BEC 2D plus EX |
1 x | SPS 70V 100/200 A |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Multi-adapter balancer JST/C - TP |
2 x | BALSA triangular 10x10x1000 mm |
2 x | Set freno para ruedas Dia. 127 mm |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Big Crow DLE-170M |
1 x | Escape DLE-60 Dcha |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | DLE 55 Muffler |
1 x | CENTRAL PROPELLER BOLT FOR DLE85/111/120 |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Restrictor FESTO 3/3 mm |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Tailwheel for 20/60 size |
1 x | Indoor landing gear set |
1 x | 28 mm tailwheel unit |
1 x | Tailwheel for 40/90 size |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Opto Gas Engine Kill Switch |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Canister combo DLE 120 cc |
1 x | Tail wheel for 8-12 kg models |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | 150 Newtons FEMA absorber |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Tap FESTO 6-6 mm |
1 x | Landing gear strap large (4 uds) |
1 x | Manometer 4 mm |
1 x | Hose connector stopper 4 mm |
1 x | Y-Hose connector 4-4-4mm |
1 x | T-Hose connector 6-6-6 mm |
1 x | ER-40eVo Set A [2x ER40 + RB-45] |
2 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Carburetor DLE 20 |
1 x | Piston ring for DLE-20 |
1 x | Carburetor DLE 170 |
1 x | Muffler DLE-120 Left |
1 x | Canister combo DLE 55 cc |
1 x | Cilinder DLE 30 - DLE 60 |
1 x | CILINDER FOR DLE 55RA |
1 x | DLE-55RA Ignition unit |
1 x | 120x60 mm SLH KOVO wheel |
1 x | DLE Ignition 170M |
1 x | Sparkplug DLE CM6 |
1 x | CILINDER FOR DLE55, DLE111, DLE222 |
1 x | DLE 55-RA Muffler |
1 x | Muffler DLE 20 |
1 x | Canister combo DLE 111 cc |
1 x | Piston ring for DLE-20 RA |
1 x | Carburetor DLE 30 |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | DLE 85 Ignition unit |
1 x | Cylynder DLE 20-RA |
1 x | DLE 55 Ignition unit |
1 x | Small Crow DLE-170M |
1 x | Muffler DLE 30 |
1 x | Cargqador GensAce IMARS III Pro Smart Balance RC |
1 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
1 x | Tailwheel for 60/120 size |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Tail wheel for 5-8 kg models |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Servo holder for retract |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | L-shaped servo mount |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | 400 Newtons FEMA absorber |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Tailwheel for F3A size |
|
12,487.11EUR |