1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 1/4 Pilot "Mike" |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Softshell Hispano Aviación |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Blind nut M6 (4 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Propeller CFK 17x13 |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | 1/6 Pilot "Tony" |
1 x | Conector BEC female (10 pcs) |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Xplorer4 anemometro |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Blind nut M5 (4 pcs) |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Straightened threaded rod M2-1m |
2 x | Squared carbon wing joinner 5x5x220 mm |
2 x | ABS tube 16.0x14.0x1000 mm |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Conector JAPAN G2 Set 5 pares |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Aluminium wide washer M3 blue (4 pcs) |
2 x | Blue smoke canister 100 g |
2 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Extension 100 cm (Futaba) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Dean "T" - Futaba Adapter |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Smoke set "M" |
1 x | 100 mm rods set for direction control |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Servo NARO Max Std |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Windsock Ozone L -1200 mm |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Small pinned hinge (6 uds) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Blind nut M2 (10 pcs) |
1 x | 1/6 Pilot "Garry" |
1 x | Propeller RF CFK 14.5x14 |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Small aluminium horn red (2pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Ball link M3 (6 uds) |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Profile ABS half cane 4x1000 mm |
1 x | "M" set |
1 x | 1/12 Pilot "Fighter" |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Gates hinge |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | 1/4 Pilot "Heidi" |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Field folding model stand |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Ball link M2,5 (10 pcs) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Tube Pitot to PIXHAWK |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Cable with accesories |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Smoke set "Glider" |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | 30 cm DEANS female connector |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | 6 mm aluminium horn with patella |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Medidor ángulos y/o incidencias |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Vasa model Catapult |
1 x | PPM Encoder Module |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Long pinned hinge (6 uds) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Motor A2212/13T |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Para-RC Trike "RC-Bullix" |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Spinner NUT M10x1 |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Small aluminium horn gold (2pcs) |
1 x | Propeller CFK 11x8 |
1 x | Interface Jack Adapter IKARUS |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | 15 mm floating pad (30 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | Propeller CFK 14x7 |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | BEC 3A FOXY |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Small Crow DLE-170M |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Propeller CFK 12.75x13 |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Flap hinge (6 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | VALACH Motors VM 70 S1-4T |
1 x | Cabling for Fox MDM1 wings |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Parachute PV6 for F3J |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | MAX pilot ARTF |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Oracover Green10 m |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Round Rod 4,0x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Cockpit aluminium closing |
1 x | Cabel charger transmitter GRAUPNER |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Extension silicon 25 cm (Futaba) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Propeller balancer |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Connector Sub-D 2+5 Male |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Cockpit plastic closing |
1 x | Propeller CFK 12.5x7 |
1 x | Propeller CFK 15x7 |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | 1/12 Pilot "Cougar" |
1 x | Angle measurer |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Round Rod 3,0x1000 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Round Rod 2,5x1000 mm |
1 x | Green smoke canister 140 g |
1 x | Propeller CFK 16x16 Wide |
1 x | Conector XT-30 (macho) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | M3 Maxi ball link (2 uds) |
1 x | PIX Hawk with accesories |
1 x | HBC 10035-3 32-Bit |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Connectors DEANS (T) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Remote electric ignition system |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Ferrita 14x8x5.5 mm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Strip 2,0x2,0x330 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | 1/6 Pilot "Cindy" |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Round Rod 1,5x1000 mm |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Oratex Silver 2m |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Propeller CFK 12X6 |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Conector JR Servo female (10 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Xplorer1 anemometro |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Para-RC Mix |
1 x | Cap Hispano Aviación |
1 x | Propeller CFK 15x16 |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Propeller CFK 15x13 Slim |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Shirt Hispano Aviación |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Small aluminium horn blue (2pcs) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Ball link M3 (10 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
|
14,143.25EUR |