4 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
5 x | Marker ties (20 pcs) |
3 x | Spikes Band (5 m) |
4 x | Ferrita con funda |
4 x | Buy Perforated film 100 cm / 50 m |
5 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
6 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | 38x4,5 mm wires output (2 pcs) |
4 x | ARAMID honeycomb 1300x2600x2 mm |
4 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
3 x | ABS 500 x 400 x 1,5 mm (white) |
4 x | ABS 500 x 400 x 2,0 mm (white) |
7 x | SE Ring 400 mm (2 pcs) |
7 x | SE Ring 350 mm (2 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
3 x | SE Ring 330 mm (4 pcs) |
5 x | Tape GFK 50 mm |
6 x | SE Ring 300 mm (2 pcs) |
5 x | 20x1000 mm Ring Strap Back To Back |
6 x | 20x200 mm battery rings |
6 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
7 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
6 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
8 x | Aluminum Bayonet / strongal D25 mm / 1 m |
9 x | SE Ring 450 mm (2 pcs) |
7 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
6 x | SE Ring 250 mm (2 pcs) |
5 x | SE Ring HACKER 300 mm (2 pcs) |
9 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
6 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
4 x | Cinta Goldfix 1m |
7 x | Tape GFK 38 mm |
7 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
6 x | SE Ring 200 mm (2 pcs) |
9 x | Ring 320 mm length (5 pcs) |
10 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Ventus 1:4 set of instruments |
8 x | Tape GFK 25 mm |
8 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | 1,2x1000 mm 2:1 black termoretract tube |
4 x | 102x26 Ø6.0 mm aluminium core wheel |
2 x | NIKE-2 EVO ARF |
1 x | Fox MDM 1 4000 mm Std. |
2 x | Albatros ,spare fuselage (Top Model) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
7 x | Parachute PV6 for F3J |
1 x | A30-M/L/XL Backmountset complete |
1 x | Axle for motor A30-XL V2 |
1 x | Jeti Box mini |
1 x | Ion Pro, Wing joiner (JP Model) |
1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | 1/6 Pilot "Cindy" |
2 x | Ferrita 17x10x6.5 mm |
2 x | Aero-Master (Aero-naut) |
1 x | Threaded coupler M3 (10 uds) |
4 x | 100x50 mm SLH KOVO wheel |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | White smoke canister 140 g |
1 x | A50 Backmountset complete |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | A60-6XS V4 28-Pole |
5 x | Set cintas unión paracaídas 145 cm |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
3 x | A50 Backmountset complete |
2 x | Avia spare fouselage CF reinforced (Top Model) |
2 x | Ventus 2cx 4.5 m de Luxe |
1 x | 1/6 Pilot "Buddy" |
2 x | AX-60 starters (5 pcs) |
1 x | Threaded coupler M2 (10 uds) |
1 x | SATORI 2 PRO V C64 F5J |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
4 x | Angled clevis with threaded rod M3 |
2 x | Esc MasterBasic 70SB |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | DUPLEX 2.4EX RC Switch |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | AX-60 starters (5 pcs) |
1 x | Challenger ARF (Top Model) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
4 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Swift 5050 mm (Airwold) |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
2 x | Avia (Top Model) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
4 x | 115x29 mm (4.50") Type jets aluminium core wheel |
2 x | Vest clothes Hispano Aviación |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Painting GHT Lexan Black 150 ml |
2 x | Ventus 2cx 4.5 m Sapare Fuselaje |
5 x | Beech dowels 4.0 x 1000 mm |
1 x | ASW 15 5000 mm (Airwold) |
2 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Kwik link AL M4 con Clip (2 pcs) |
3 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | A40 Backmountset complete |
5 x | 5 LiPo XH>EH adapter |
2 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Fournier RF-4D |
1 x | Ion Pro, Canopy (JP Model) |
3 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Carbon fiber rod 14 mmx1000 mm |
5 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
5 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | PCARD Wireless System |
4 x | 120x60 mm C SLH KOVO wheel |
3 x | Paramotor Trike XL |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Spannlack 1000 ml |
3 x | Gracia (Top Model) |
4 x | 2,4x1000 mm 2:1 green termoretract tube |
2 x | Spray EC Red 400ml |
4 x | Rescue 1,8m2 / BackPack |
1 x | 18m Fitting barb |
1 x | 3l Smoke oil |
3 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | 1/12 Pilot "Fighter" |
1 x | Ventus 2cx 4.5 m |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Partall paste 650 g |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | ProgBOX MASTER Hacker |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Green smoke canister 65 g |
2 x | Silent-blocks DLE 170M |
1 x | |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Axle for motor A20-S (3 uds) |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Smoke set "S" |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Aero-Master Wings (Aero-naut) |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | BALSA trip 5.0x5.0x1000 mm |
3 x | Hacker X-Pro USB interface V2 |
1 x | LUNAK 4,00 m |
5 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | "S" set for boats |
2 x | Fascination 3600 mm, Spare Wings (Top Model) |
3 x | Kontronik ProgUnit |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
2 x | Astra (Top Model) |
1 x | Smoke set "Glider" |
1 x | EASYGLIDER 4 RR |
3 x | 127x43 Ø6.0 mm aluminium core wheel |
2 x | Esc MasterBasic 90 Opto |
2 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
4 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | Q-12 X-light 2000 mm Electric |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | ASK 21 6.8m |
1 x | Navaho new design (Top Model) |
1 x | Esc MasterSPIN 100 Pro |
3 x | 120x60 mm SLH KOVO wheel |
1 x | 1/12 Pilot "Langley" |
2 x | Smoke set "M" |
3 x | 2,0x50 mm allen screwdriver |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | GRAFAS MAXI ARF |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
8 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Red smoke canister 65 g |
4 x | Wing OXY 5,0 m2 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
2 x | Paint gun for sprays |
2 x | Sparkplug 1/4-32 EVO 10GX |
2 x | Threaded coupler M2,5 (10 pcs) |
1 x | Connector CAN 15 |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | A50 Backmountset complete V3/V4 |
1 x | Conector JR Servo female (10 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | ABS tube 8.0x6.0x1000 mm |
2 x | Sparkplug NGK CM6 |
1 x | wire tensioner (red) |
3 x | Cap Hispano Aviación |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
4 x | Red copper lacquer wire Ø0,2 mm (5 m) |
3 x | "Taxi Tank" Fuel Tank |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
3 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
2 x | Extinguisher CO2 - 2 Kg |
1 x | Servo DITEX TD2612S |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | HERON RR |
1 x | XT-60 connector (female) |
1 x | DUPLEX 2.4 EX MBar |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Sparkplug ROSSI R8 |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Ka 8 B (Top Model) |
2 x | Spark motor OS nº 8 |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Servo FUTABA SBL 471 SV |
2 x | TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017 |
5 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | 1/6 Pilot "Garry" |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | TopFuel LiPo RX 25C-ECO-X 800mAh 2S |
2 x | DUPLEX MUI 30 Sensor |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
2 x | Nitroverdu 500 ml |
4 x | Trike XL motor set (motor+esc+prop) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
3 x | Windsock Ozone L -1200 mm |
1 x | Towing hook |
2 x | Green smoke canister 100 g |
2 x | Connectors banna gold 5,5 mm (M/F) |
2 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
4 x | BALSA triangular 10x10x1000 mm |
1 x | Small kwik link (10 pcs) |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Pulley brass 5/1,5 (2 pcs) |
4 x | 20 g tin paste |
3 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Threaded coupler M2 (10 pcs) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | |
2 x | Futaba 25 mm servo arm with ball link |
3 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | White smoke canister 65 g |
1 x | Ventral support for AX-18/AX-60 |
3 x | Balsa panel 4.0x100x1000 mm |
2 x | Telemetry interface ALTIS to Futaba |
1 x | MYSTIQUE 2.9 m ARF |
2 x | Sparkplug DLE CM6 |
1 x | Futaba BLS152 - Upper Case |
4 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | FESTO connector M7 Quick 4mm 90º |
2 x | 28 mm turnbuckle |
1 x | Flip ARF (Top Model) |
4 x | 89x25 mm (3.50") Type jets aluminium core wheel |
3 x | Servo FUTABA S 3072 HV S-Bus |
1 x | XT-30 connector (pair) |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Pine wood slat 2.0x2.0x1000 mm |
6 x | Altimeter Altis NAO |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
4 x | GPS Altis |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Balsa panel 1.0x100x1000 mm |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Device Terminal |
1 x | Servo holder for retract |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | L-shaped servo mount |
1 x | Balsa panel 10x100x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
5 x | Balsa panel 3.0x100x1000 mm |
1 x | Keypad ALTIS V4 |
4 x | Telemetry interface ALTIS 20 cm |
3 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Telemetry interface ALTIS 12 cm |
3 x | Balsa panel 6.0x100x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
3 x | Balsa panel 2.0x100x1000 mm |
3 x | Birch plywood plate 600x300x4.0 mm |
2 x | Z-shaped servo mount |
3 x | Balsa panel 1.5x100x1000 mm |
2 x | Pine wood slat 10x10x1000 mm |
3 x | Balsa panel 2.5x100x1000 mm |
3 x | External LED's (2 pcs) |
1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
2 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
2 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Servo Digital HITEC HS-5065 MG |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
2 x | Fuel Fittings-Blue |
4 x | Shirt Hispano Aviación |
1 x | Futaba BLS255/272/471SV - Gear Set |
3 x | Birch plywood plate 600x300x3.0 mm |
2 x | Spray Graphit 33 |
2 x | BALSA triangular 15x15x1000 mm |
1 x | XH female balance (3S) connector (2 pcs) |
2 x | 3.2 mm Prop Adapter M8 |
2 x | Wing OXY 0,5 pulgadas2 |
2 x | 76x24 mm (3.0") Type jets aluminium core wheel |
3 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Conector BEC female (10 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
3 x | Servo arm with 6 mm hole to FEMA 9800A |
3 x | Altimeter Altis V4 |
2 x | Telemetry interface ALTIS 6 cm |
3 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
2 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
4 x | 4 LiPo XH>EH adapter |
4 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | Para-RC Trike "RC-Bullix" |
1 x | Yellow smoke canister 65 g |
1 x | Hitec 52 mm servo arm |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
4 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | T-Hose connector 3-3-3 mm |
2 x | LS-8 GFK 6m Glider |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | Fox 4000 mm with flaps (Airwold) |
3 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
2 x | Silicone black 1,0 qmm wire (100 m) |
2 x | FESTO connector M7 barb fitting 6mm |
2 x | 2 mm Prop Adapter M6 |
3 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
2 x | 33,0 mm propeller (rigth propeller) |
2 x | TopFuel LiPo 25C-ECO-X 1300mAh 2S |
1 x | DUPLEX MUI 50 Sensor |
1 x | Bearings for motors hacker A50 |
3 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
3 x | 1000 cc gasoline fuel tank complet |
1 x | XENON RC (Aero-naut) |
2 x | A60 Motor Mount Alu complete set |
3 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
3 x | TP/TopFuel - XH 2/3S Adapter |
1 x | SWEET Electro ARF "CFR fuselage " (Top Model) |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Motor A2212/13T |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Me-163 |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | 36 mm white plastic spinner for fixed propeller |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Support 45% Hopper JetsMunt |
2 x | Big-Malibu XL Roof box with surfboard rack GREY |
2 x | A/C quality beech plywood 600x300x1.5 mm |
4 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Fascination 3600 mm (Top Model) |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | 5 mm Prop Adapter M8 |
3 x | 3,2 mm Prop Adapter M5 |
1 x | ABS tube 7.0x6.0x1000 mm |
2 x | |
1 x | Remote electric ignition system |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Extension Arm for Carburetor (red) |
2 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | Servo HITEC HS-635HB Carbonite |
2 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | Servo HITEC D950 TW |
1 x | Yellow smoke canister 100 g |
1 x | Servo FUTABA S 9670 SV |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | 1/12 Pilot "Cougar" |
1 x | PropCover 16-20" (1 pcs) |
2 x | PowerBox Competition |
1 x | BIG MOSNTER |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
2 x | Red smoke canister 100 g |
1 x | Copier 2x20 cm pcs |
1 x | PowerBox Spare part magnetic sensor |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | Blue smoke canister 140 g |
2 x | Carbon plate 350x150x3.0 mm |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
5 x | Tube Pitot to PIXHAWK |
2 x | DUPLEX 2.4EX Expander E4 |
1 x | Pegasus 2050 mm F4J (Top Model) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
5 x | Buy Perforated film 100 cm / 20 m |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | 550 cc gasoline fuel tank complet |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Red 4 mm connector holder |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
3 x | 12.7 mm 2:1 black termoretract tube |
2 x | Conector FUTABA Servo female (10 pcs) |
2 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Extension for LC-Display 50cm |
3 x | 30 cm BEC cable (male) |
2 x | DA 85 / DA 100 / DA 100 L carburetor |
3 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Softshell Hispano Aviación |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | 31,0 mm propeller (rigth propeller) |
2 x | 1000 ml sealer (DOPE) |
2 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
2 x | ABS tube 5.0x4.0x1000 mm |
2 x | DLE 111 pipe plug |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | DUPLEX 2.4EX MU 3 Sensor |
3 x | DC Small for MultiLog & UltraLight |
1 x | USB Mini Camera endoscope |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | DUPLEX 2.4EX MT 300 EX |
2 x | Fiberglass plate 620x540x0,3 mm |
3 x | Windsock Ozone L - 700 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Short adjustable control horn 3x24 |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | EME 55 cc carburetor WALBRO |
2 x | Crystal Universal RX 35.020 Ch 62 |
2 x | Bag connector 2 mm |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | OLED-Display for PowerBox Mercury SRS |
2 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | switch long 3-position DS Tx DUPLEX 2,4EX |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Hardener Aero EPH 161 (250 g) |
1 x | THERMIK XXXL 4,9m CFK Electric |
3 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Servo HITEC HS-5475 HB Digi |
3 x | Carbon fiber rod 5.0 mmx1000 mm |
3 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
3 x | PropCover 16-20" (2 pcs) |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
2 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Parachute P4 |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | 500 ccm gasoline fuel tank |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
4 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Cable adapter iCharger |
3 x | Connectors banna oro 2 mm (M/F) |
1 x | FESTO connector M7 barb fitting XL Tygon |
2 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Esc MasterSPIN 16 Pro |
2 x | CA Glue fast 20g |
4 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | SIG Coverall 1.2x4.5 m |
2 x | ESC YGE 120 LVK |
3 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
2 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
2 x | ABS tube 3.0x2.0x1000 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Welder 100W/200V |
2 x | Y-Hose connector 4-4-4mm |
4 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Propeller MEJLIK 18x8 CFK |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Parachute expulsion foam |
1 x | Module 2.4GHz T-FHHS "F" Series |
1 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
3 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
2 x | DYMOND VTX UBS Programming adapter |
1 x | Small aluminium horn blue (2pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | LiPo Storage Box Type "P" |
4 x | PIX Hawk with accesories |
1 x | Jeti Advance Pro Program Card |
2 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Reed valve for DA 50-R |
2 x | SAITO FG-36 carburetor |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
4 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | Suction funnel for carburetor 90D-M (red) |
2 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
2 x | MPX-Dean "T" Adapter |
2 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Servo-V-Limiter 5.2V |
1 x | PHASOR RACE 2035/4100 1D |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Small aluminium horn gold (2pcs) |
2 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Fascination 3600 mm ARC |
2 x | PowerBox Champion SRS |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Servo HITEC HS-55 |
2 x | Servo HITEC HS-65 HB |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | Jeti Spin 200 OPTO |
2 x | Dean "T" - Futaba Adapter |
1 x | Connectors MPX female |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode |
1 x | Male Prolonger TP 4/5S |
1 x | Connectors DEANS 4 pins (1 pair) |
3 x | ABS tube 2.0x1.0x1000 mm |
2 x | ABS tube 4.0x3.0x1000 mm |
2 x | Canopy Sweet / Siesta |
2 x | 3 mm Leader (L 100 mm) |
1 x | TopFuel LiPo 25C-ECO-X 1800mAh 3S |
3 x | 90x45 mm hard foam KOVO wheel |
4 x | PPM Encoder Module |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Spinner INOVA 63 mm White |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Horizontal servo holder |
2 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | 3,2 mm Prop Adapter M6 |
1 x | "S" set for planes |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | 22x10 prop Super Silence |
5 x | PowerBox MagSensor red connector |
4 x | Cable coupler M2,5 (2 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Spark motor OS Type F |
1 x | Tyres 70 mm Xclaibur (2 pcs) |
1 x | QUANTUM II 55 Brushless Motor |
1 x | Servo inverter |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | PROFI Box JETI |
2 x | Fiberglass plate 350x150x3.0 mm |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Allen wheel collar M3x3 |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | MT 125 temperature sensor |
2 x | Albatros ,spare cockpit (Top Model) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
2 x | Jeti Advance Plus Program Card |
1 x | 5 mm Prop Adapter M8 |
4 x | Universal Colour Paste white 50 g |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
2 x | FESTO connector M5 Quick 6 mm |
1 x | Pulley brass 4/1,5 (2 pcs) |
2 x | 2,3 mm Prop Adapter M6 |
1 x | Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return |
2 x | Servo DITEX EL0510M |
6 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
2 x | SCHARNHORST Battleship 1:200 |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | 29x23D BIELA propeller |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
3 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
2 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Yellow smoke canister 140 g |
2 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | 280 cc gasoline fuel tank complet |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | CESSNA 50E White/Blue |
2 x | Turbo Prop KS |
2 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | Aero-Master Cabine (Aero-naut) |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | 500 ml sealer (DOPE) |
1 x | DPSI Micro - RCS |
1 x | Bidule 111 3000 mm Canopy |
5 x | Para-RC Mix |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | FANTEX 4xx turbina |
1 x | Conector Servo female 4 pines |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
2 x | 5 mm Prop Adapter M8 |
1 x | ABS tube 10.0x8.0x1000 mm |
2 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | PBY 6/6A Catalina, Observer´s dome (L + R) |
2 x | BULLIT Wing 840 mm |
1 x | BlueCom™ Adapter (Android / WP) |
2 x | Neck strap JETI DS |
2 x | Adapter 4,0 mm M6 |
1 x | Propeller CFK 14x10 |
4 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | FUTABA F14 + R168DF + Servo S148 |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Poerfly |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Aero-Master Fuselage (Aero-naut) |
2 x | Solvent Plasti Dip 1000 ml |
1 x | Transmitter Stick Ends JETI DS-16/14 |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Bidule 55 2460 mm Cabina |
2 x | Buy Perforated film 145 cm / 50 m |
2 x | JETImodel SINGLE BEC |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
2 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | XCALIBUR Fuel Tank with built in UAT |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Propeller CFK 14x8 Slim |
1 x | TUNED PIPE for motors up to 40-60 & 70-85 cc |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
4 x | Paramotor BackPack XXS 2 |
1 x | switch 1-Spring-DOWN 3-position DC Tx DUPLEX 2,4EX |
1 x | 5 mm Prop Adapter M6 |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Towing hook |
1 x | Propeller CFK 11x8 |
1 x | Glider STROLCH |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Xplorer2 anemometro |
3 x | 250 mm / 16 mm Airbrakes |
1 x | 26x18 BIELA propeller |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
2 x | Styrene plate 320x120x0.5 mm |
1 x | Carburetorgasket DA-85, DA-100, DA-100L and DA-120 |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
2 x | 2,5x60 mm allen screwdriver |
2 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
1 x | Sensor telemetry FUTABA SBS-01C |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | FOXY G2 C3530-700 |
1 x | Smoke Dot (Red) |
1 x | Rudder 2_Tray 3.5~4 inch |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | TopFuel LiPo 35C-POWER-X 2400mAh 2S |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Adapter 3,2 mm M6 |
1 x | Servo HITEC HS-5645 MG Digi |
2 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Programador FUTABA USB CIU-3 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Swicht F14/FC-16 (3 pos) |
1 x | switch long 3-position DC Tx DUPLEX 2,4EX |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Metalic motor holder for class 550-600 |
1 x | 20 mm carbon horn |
1 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
2 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
3 x | Cabel charger transmitter GRAUPNER |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
3 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | 22x10 BIELA pusher propeller |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Size "M" motor holder for class 600 |
1 x | Esc MasterSPIN 99 Pro OPTO |
1 x | Cable coupler M3 (10 uds) |
2 x | Foam plastic plates (310x210x8 mm) |
1 x | Servo HITEC HS-225 BB |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm |
1 x | Brake for 140 mm wheels |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Gracia Maxi ARF, bags (Top Model) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
2 x | Servo FUTABA BLS 272SV |
1 x | ABS tube 3.0x1.0x1000 mm |
2 x | Extension for SensorSwitch 30cm |
2 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Cylinder DA-50R, DA-100, DA-100L |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 32x18D BIELA propeller |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | Cockpit metalic closing |
1 x | Wheel 22 mm |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | |
3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | wire tensioner (black) |
1 x | Towing hook <3m |
1 x | Propeller CFK 15x15 |
2 x | 23x8 BIELA propeller |
1 x | Servo HITEC HS-75BB Retract |
1 x | 3 mm Prop Adapter M6 |
1 x | Prelude ARF 2500 mm (TopModel) |
2 x | PBY 6/6A Catalina (aero-naut) |
1 x | PIT (Aero-Naut) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | switch short 3-position DC Tx DUPLEX 2,4EX |
1 x | DPSI 2001 RV |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Servo MKS HV 777A+ |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | JetiBOX |
1 x | Epoxy 40 min (Resin). 5 Kg |
2 x | 4 mm Prop Adapter M6 |
3 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Frontal support Speed 600 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Multi-adapter balancer JST - TP |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
2 x | SCHARNHORST accessories |
1 x | Universal Colour Paste deep black 250 g |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
4 x | 110x55 mm C SLH KOVO wheel |
2 x | 1,5x50 mm allen screwdriver |
1 x | XT-90 connector (pair) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
2 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Propeller CFK 18,5x12 |
1 x | 45 mm rods set for direction control |
3 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Black large kwik link (10 pcs) |
3 x | 45 mm rods + T patellas set for direction control |
1 x | Ball link M3 (6 uds) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
2 x | ABS tube 14.0x10.0x1000 mm |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Straightened threaded rod M3 - 1m |
2 x | Aramid 50 daN 50 m |
1 x | Servo MKS HV6130 |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Spinner 60 mm GFK |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Propeller CFK 12.5x7 |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | Fiberglass plate 350x150x1.5 mm |
2 x | Jeti Black cap |
1 x | 13 mm wing servo holder |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
2 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 1/10 Pilot "Jack" |
1 x | Reed valve petal for DA 60 carburator |
1 x | DA-50R motor alumine support |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
3 x | Turbine LYNX 130 |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Red 3m5 mm connector holder |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser |
1 x | Bidule 111 3000 mm |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,8:1) |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Miss ULTIMATE 50E Red/Black |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Servo HITEC HS-77 BB Low Profile |
1 x | RX external cable for estandar receivers |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Straightened threaded rod M2-1m |
2 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Esc X-40-SB-Pro |
5 x | 5 mm Prop Adapter M6 |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Esc X-70-OPTO-Pro |
1 x | PIN Connector female (100 pcs) |
1 x | Servo TOPMODEL S7520 MG |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | LO 100 ARC 3.3m,cabina |
6 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
2 x | XPower H PROP HUB Ø5.0/20mm +2,5° |
1 x | Propeller CFK 18x9 |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Spinner 104x131 mm 115 g CFK-BS |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
2 x | 140 mm rods + T patellas set for direction control |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | Release film 100 cm x 50 m |
1 x | Turbofan 2000 NG, rotor |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo |
1 x | Conector JR Servo male (10 pcs) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Canadair CL-415 (aero-naut) |
1 x | 22x8 BIELA propeller |
1 x | 4 mm Prop Adapter M8 |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | Esc X-70-SB-Pro 2-6S |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | Servo HITEC D625 MW |
1 x | Fuel dot Gold color |
1 x | Excentric gearbox for 2,3mm axis (2,33:1) |
1 x | PowerBox iGyro 3xtra |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Spinner 80 mm GFK |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
2 x | FESTO connector M5 Quick 4 mm |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
3 x | Electric spoiler 250 mm (2 pcs) |
1 x | 1/6 Pilot "Tony" |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Xplorer4 anemometro |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Boat 140 mm |
2 x | Anchor of tow Met. 60 mm |
1 x | 6 mm Prop Adapter M8 |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
2 x | Round Rod 3,0x1000 mm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Stickers-digit for marking |
2 x | Rigid coupling brass Ø 3 mm L: 20 mm |
2 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Railing Ø 2mm (20 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Allen wheel collar M3x5 |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Connector Sub-D 2+5 Male |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
2 x | Extractor piñones 2.3/3.2 mm |
1 x | Round Rod 1,5x1000 mm |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | 80 mm rods set for direction control |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
3 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Ply-Span 450x600/13g Black |
1 x | Blind nut M3 (4 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
2 x | ABS 500 x 400 x 1 mm (white) |
1 x | Ferrita 14x8x5.5 mm |
1 x | Motor DLE 200cc Std |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | 20x15 Falcon electric V2 |
1 x | Oracover Yellow CADMIO 2 m |
1 x | Double conector with JR adapter and 200 mm extension |
2 x | Oracover Brown 2 m |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
3 x | 2 LiPo XH>EH adapter |
2 x | 4,8x1000 mm 2:1 black termoretract tube |
3 x | 80x40 mm hard foam KOVO wheel |
4 x | Mahagoni 1.0x100x1000 mm |
1 x | KingTech K45TP G4 Turboprop |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
5 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
2 x | Railing L250 mm (10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Cabling for Fox MDM1 wings |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
2 x | Clip fixing for wing (2 pcs) |
1 x | Muffler DLE-120 Right |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Cockpit aluminium closing |
1 x | Strip 3,5x1,75x330 mm |
2 x | Allen wheel collar M4x4 |
1 x | Micro flex hinge (12 uds) |
2 x | Boat 82 mm |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Boat 43 mm (5 pcs) |
2 x | 4 mm Prop Adapter M6 |
4 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Oracover Azul Cielo 2 m |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | DPS Switch JR/JR |
1 x | Canopy Latch |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Lock washer 3.2 mm (20 pcs) |
2 x | PowerBox iGyro 1e |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Small flex hinge (12 uds) |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | CORTEX |
3 x | Rigid coupling brass Ø 2 mm L: 15 mm |
4 x | 152x46 Ø6.0 mm aluminium core wheel |
5 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | TrainerCord (master-learner) |
2 x | Opale Rucksack |
1 x | Futaba F14 Twin Boat Stick |
1 x | DLE 55 RA pipe plug |
1 x | Round Rod 1,0x1000 mm |
1 x | Medium pin type hinge (12 uds) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Hinge 4x14 mm (20 pcs) |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | 2,3 mm Prop Adapter M5 |
1 x | Oracover Yellow CUB 2 m |
1 x | Antenna 50 mm (2 uds) |
1 x | Actuator Electric 25 mm HIGH TORQUE |
2 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
1 x | BALSA trip 4.0x4.0x1000 mm |
2 x | 300 Newtons FEMA absorber |
1 x | Oracover Red 2 m |
2 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Ply-Span 450x600/13g Red |
1 x | Blind nut M4 (4 pcs) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
4 x | 76 mm light wheels (2 pcs) |
1 x | Strip 1,5x1,5x330 mm |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Strip 2,0x2,0x330 mm |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
2 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Coupling bush 5 - 5 mm |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | ABS I Strip 10x5x1000 mm |
6 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | La Capitania di Venetia accesories |
1 x | UBEC 6A KAVAN |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Futaba Multi-Switch-Prop 12+2 MODUL |
3 x | 2,3 mm Prop Drive Günther M4 |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
3 x | Round Rod 4,0x1000 mm |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | LUCAS pilot ARTF |
1 x | Liferaft 47 mm |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | USB HLS prog. interface |
2 x | 3 LiPo XH>EH adapter |
1 x | Ply-Span 450x600/13g White |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
2 x | Paramotor BackPack XXS (without accessories) |
1 x | Hinges 7x12 mm (20 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
2 x | Small Crow DLE-170M |
1 x | Spring lock washer 2.1 mm (20 pcs) |
3 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Small pinned hinge (6 uds) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | SOLOFOX 5m Voll-GfK |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
3 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | Futaba Prop Module F14 |
1 x | Catalog AERO-NAUT 2016 |
2 x | Absorver mount set for 5-10 Kg models |
2 x | MYLAR film A350 (1000x500 mm) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Oratex Natural White 2m |
1 x | Ply-Span 450x600/13g Orange |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Anchor 25 mm (2 uds) |
2 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
2 x | 25 mm reinforced hinge |
2 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | 15 mm floating pad (30 pcs) |
3 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | MAX pilot ARTF |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | 3 mm Long Prop Adapter M5 |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Oracover White 10 m |
1 x | Round flex hinge (12 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | SUPER DIMONA TC-80 |
1 x | A/C quality beech plywood 600x300x5.0 mm |
3 x | Ferrita 27x14x7 mm |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Oratex White 2m |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Futaba Neckstrap |
1 x | Cabin latch Fox MDM1 4m (pair) |
4 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | 140 mm rods set for direction control |
1 x | Xplorer3 anemometro |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Connectors MPX male (PIN double) |
1 x | Capstan of plastic 88x30x36 mm |
2 x | 12 mm floating pad (49 pcs) |
1 x | Round Rod 2,5x1000 mm |
2 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | Oracover Black 2 m |
1 x | BEC 3A FOXY |
3 x | Pump 12 V |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
2 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Strip 2,5x1,25x330 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | CM-3 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | 100 mm rods set for direction control |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
3 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Oracover Azul 2 m |
1 x | Tirpiz Battleship 1:200 |
1 x | Oracover Orange 2 m |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | 110x55 mm SLH KOVO wheel |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
2 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Motor DLE 170 M- Paramotors |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Circlick securite |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Exhaust K45TP |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Boat with oars 110 mm |
1 x | Big Crow DLE-170M |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | ORACOVER Fluor red (2 m) |
3 x | Railing 5x100 mm |
3 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Capstan of plastic 91x44x45 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | 200 Newtons FEMA absorber |
1 x | Round Rod 1,25x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | 5 line servos wire black (1 m) |
2 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
2 x | Cable Cargador FUTABA |
2 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
2 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Green silicone 0,25 mm² wire (25 m) |
2 x | Spare Shaft Ø4mm L:450x23mm M4 |
2 x | Crystal Universal RX 35.050 Ch 65 |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | STEUERRAD met. 25 mm |
2 x | Rudder 45 mm |
2 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Wood anchor 30 mm (2 uds) |
2 x | Soporte barandilla madera 16 mm (10 pcs) |
1 x | Sheave Pl. 1R. 5 mm |
1 x | Top light Red 10mm/3V (2 pcs) |
1 x | Thruster propeller 30/33 mm with motor 400 7,2V |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | Sheave Pl. 1R. 3 mm |
2 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | Top light 6mm/3V Red (2 pcs) |
1 x | Crystal TX 35.150 Ch 75 |
2 x | TAKELHAKEN Ms 12x10 mm |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Giant Scale Muffler D.A. 70 |
2 x | Transom 40 mm |
1 x | Strut M 1:50 3D (30 pcs) |
1 x | Timon madera 30 mm |
1 x | Strut M 1:25 3D (30 pcs) |
1 x | Ventilador (metal dorado) 15 x 34 mm, 2 piezas Ø 15 mm x 34 mm a |
1 x | Soporte barandilla madera 8 mm (10 pcs) |
1 x | Strut M 1:32 3D (30 pcs) |
2 x | Crystal RX 35.120 Ch 72 |
1 x | Junta humo metalica G35 DLE35 |
1 x | Strut M 1:50 2D (30 pcs) |
1 x | Sheave Pl. 2R. 3 mm |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | Windlass 67x45 mm |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Rudder 36x60 mm |
2 x | Sheave Pl. 2R. 12 mm |
1 x | Timon madera 45 mm |
1 x | Pitts Muffler kit for CAP 21 |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
2 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Ventilation grid 17x62 mm (5 uds) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
2 x | BOX-Setup Actro-marine |
1 x | Motor ACTRO 50-2-760 |
2 x | ROOKIE 20Amp (25) A controller |
2 x | SC NAVY V15R |
1 x | Rotorshape Autogyro |
1 x | Regulador NAVY 540R |
1 x | Coupling for 3 mm axis |
1 x | Regulador Actro-Marine 80A |
1 x | ESC Actro-Marine 30A |
2 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | Motor RACE 20 Navy 12v |
1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
2 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
2 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Metal ring front FEMA |
1 x | Mudguard wheels 112/127 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Lense for Spotlights, 20mm |
2 x | Resistor 3W 5% OR47 |
2 x | Esc X-75-OPTO-Pro |
1 x | Oracover Black 10 m |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Lead with adhesive (2 pcs) |
1 x | Snap for floding prop for 2 mm axi |
1 x | Sparkplug 1/4-32 |
1 x | Oracover light Grey 2m |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Starter EM Gear Power 80 |
1 x | Window mounting channel 5m |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
2 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | JIVE 120+HV Esc |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | KOLIBRI 140 LV Esc |
1 x | JIVE 100+LV Esc |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Esc KOSMIK 160+ HV COOL |
2 x | 1804 2400KV Brushless Motor Qav 250 mini |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Esc KOSMIK 200+ HV |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | KOBY 90 LV Esc |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | SUS wire 3m (nylon coated) |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Combo 4 pcs AXI 2204 Multicopter |
2 x | ESC ALPHA 60A HV |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Styrene plate 320x120x1.0 mm |
2 x | AXI 2204 Multicopter |
1 x | JIVE 80+HV Esc |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Swing 1000 |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Carbon plate 350x150x1.5 mm |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | KOBY 40 LV Esc |
1 x | Cockpit plastic closing |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Propeller diller for DLE111 and DA85-150 |
2 x | Propadapter for motor A50 |
1 x | Propadapter for motor A60-V2 |
1 x | Propeller diller for EME35 and DLE35 |
2 x | Rubber wheel Ø 58mm x 21mm (2pcs) axis Ø 2.6mm |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Propadapter for motor A50-V3 |
2 x | 64x20 mm (2.5") Type jets aluminium core wheel |
1 x | Propeller diller for DLE170 |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Lightweight aircraft wheel, 55x18.5x3 |
2 x | Rubber wheel Ø 45mm x 16mm (2pcs) axis Ø 2.1m |
2 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | |
2 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Rubber wheel Ø 50mm x 24mm (2pcs) axis Ø 3.1m |
1 x | 29,0 mm propeller (left propeller) |
1 x | PowerBox Competition SR2 |
1 x | Bocina 30 mm (1 pcs) |
1 x | Housing Ø 4 mm (2 pcs) |
1 x | Coupling for 2,3 mm axis |
1 x | PowerBox MagSensor black connector SRS/Champion |
1 x | 460 mm EPP Floats |
1 x | PowerBox Evo |
1 x | Koffeenagel Holz hell 8 mm (20 pcs) |
2 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
1 x | MicroMatch PowerBox |
2 x | Propeller 3BL 30 mm M4 plastic Right |
2 x | PowerBox 12 |
1 x | Housing Ø 6 mm (20 pcs) |
2 x | PowerBox PROFESSIONAL |
1 x | PowerBox iGyro SAT |
2 x | 2 piece mounting frame |
1 x | Power Box GPS Sensor III |
1 x | Soporte barandilla madera 10 mm (10 pcs) |
1 x | Battlife Guard 2s |
1 x | Mounting base Ms 8 mm |
1 x | 2 piece mounting frame |
1 x | PowerBox PIONEER incl. microSwitch |
1 x | POWERBOX Magic Jeti Switch Royal SRS, Champion SRS |
1 x | Check valve quick hose connector 4-4 mm |
1 x | FOX MDM-1 3.500 mm ARF White |
1 x | Extension 2/3 lipos JST/C |
1 x | Quick hose connector 6-4 mm |
2 x | Foil for sticking flaps and ailerons |
2 x | NF-3 RC set |
3 x | PU aircraft tyre, 45x16x3 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Screw M3x8(10 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Screw M3x20 (10 pcs) |
1 x | Ancla Met. 16 mm (5 pcs) |
1 x | Tarjeta programadora RAY G2 |
1 x | Connector Sub-D 2+5 Female |
1 x | CC 02 |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | Lancha neumatica 95 mm |
2 x | Soporte con aro 17 mm (10 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | 45 mm gas motor standoff |
1 x | Timon Met. 13 mm |
1 x | Turbina KINGTECH K65 G4+ |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Oracover CARBON Metalic 1 m |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Anchor 80 mm (2 uds) |
1 x | Flat washer 2.2 mm (20 pcs) |
2 x | Pulley 10x16 mm (5 pcs) |
1 x | Rangefinder 20x49 mm (2 pcs) |
2 x | Pulley 19x22 mm |
1 x | Motor DLE 20 cc |
1 x | Bronze bearings Ø 5 x Ø 8 x 8 mm |
2 x | Motor DLE 60 cc Twin |
1 x | HDT Jet Central |
1 x | Motor Saito FG-73 R5, 72.7 cc |
2 x | Rivette Ø 1,5 mm (50 pcs) |
1 x | Coupling for 6 mm axis |
1 x | Ancla metal 40 mm (2 uds) |
1 x | Dual Sequencer Gear and Canopy |
2 x | Motor DLE 65 cc |
2 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | FOD Screen K140G/K180G/K210G |
2 x | Fan metalic 21 mm |
2 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Motor DLE 20 RA cc |
1 x | RM-130FSI 4-stroke inline gasoline airplane 3 cylinder |
1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
2 x | Silencer Ring 7-35 |
2 x | Turbine MAMMOTH 25.4 Kg |
1 x | Turbina JetsMunt M166TS |
2 x | Pilatus PC-21 2100 mm RED/WHITE (SebArt) |
2 x | Race Outboard MERCURY type A |
1 x | Canopy Astra |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Adapter 4,0 mm M8 |
1 x | Turbina JetsMunt M210TS |
1 x | Pilatus PC-21 2100 mm BLUE/WHITE (SebArt) |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Gear for MICRO BB |
2 x | Reguladro ACTROCON 60A |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Universal batery Tester |
2 x | DRACO 2.0m landing gear |
1 x | Crystal TX 35.100 Ch 70 |
2 x | Motor ACTRO 35-4-1100 |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Motor ACTRO 35-4-790 |
1 x | Bidule 170 ARF 3.48 m |
1 x | Motor ACTRO 28-4-880 |
3 x | 3 mm Short Prop Adapter M5 |
2 x | FunCub NG azul RR |
1 x | DC-3 Douglas (White/Blue) 1800 mm |
1 x | Turbina JetsMunt VT98 NG |
1 x | Crystal TX 35.050 Ch 65 |
2 x | EDGE 540-A 91" (2310 mm) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | BETA 1400 RTF Red |
1 x | GROB G109 Elektro 2.770 mm |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | One touch canopy lock |
1 x | Futaba 2x20 mm servo double arm |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | LASER 260 60" V2 ARF Red (SkyWing) |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | 30 cm DEANS female connector |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
2 x | Wheel FEMA 140 mm / 6 mm |
1 x | 100m servo "Premium" wire (white/red/blue) |
2 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | O-ring Saito FG-73 5cyl |
1 x | FIALA Propeller 18x8 |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
2 x | BlueCom™ Adapter (iOS) |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Distanzstück motor OS 120 AX |
1 x | Axle wheel with accesories |
1 x | Resistor 3W 5% 2R2 |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | Esc MasterSPIN 70 Pro OPTO |
1 x | Esc X-30-Pro BEC |
1 x | Esc MasterSPIN 75 Pro OPTO |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Quick hose connector 6-6 mm |
1 x | Landing gear strap medium (4 uds) |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
2 x | MIRAGE 2000 RED/BLACK PNP |
2 x | BD-5J ARF+ |
1 x | FELIX JR Red/Yellow 1750 mm |
1 x | PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts |
1 x | Quick hose connector 4-4 mm |
2 x | Body for landing gear Ø 4 mm |
2 x | Y-Hose connector 3-3-3 mm |
1 x | T-Hose connector 4-4-4mm |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
2 x | Wheel FEMA 178 mm / 8 mm |
2 x | Wheel ø180 mm AIRTOP Ballon pneumatic |
1 x | Wheel FEMA 70 mm / 5 mm |
2 x | Superlight wheel 125 mm with valve (2 pcs) |
2 x | Wheel FEMA 100 mm / 6 mm |
1 x | NoNa BB wheel Ø125x35mm in pair |
2 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | 4 mm Prop Adapter M8 |
1 x | Gates hinge |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 18 mm reinforced hinge |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Propeller RABOESCH M5 65 mm (4 Blades) (Right hydropropeller) |
1 x | FELIX SportJet Yellow 2200 mm |
1 x | Backmountset complete A40 |
1 x | MB339 Freece PNP 1790 mm |
1 x | PC-21 2.880 mm RAAF Sheme |
1 x | A50 Motor Mount Alu complete set |
1 x | MB339 CANADA PNP 1790 mm |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
1 x | Propeller MENZ-S 19x8 3-Blades |
1 x | Propeller APC 10x7 Glow/Gas |
1 x | Boomerang SPRINT V2 Red/White/Blue |
1 x | 17x10 BIELA propeller (3-blades) |
2 x | NoNa BB wheel Ø150x45mm in pair |
1 x | Vess propeller 13x6 S |
1 x | Propeller G-Sonic 20x8 |
1 x | Propeller MENZ-S 20x9 |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | FIALA Propeller 27x10 |
1 x | Komet Pump |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Left doors 19x10mm (10pcs) |
2 x | Propeller AERO-NAUT M4 50 mm (3 Blades pr) (Right hydropropeller |
1 x | Double BLOCK 3x9x5 mm (3 pcs) |
1 x | FIALA Propeller 18x10 |
1 x | FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Parachute BACKUP X100 |
1 x | 290 mm M5 Prop shaft |
1 x | Pendulun "Special" to tank 60g |
1 x | Radar 56 mm |
1 x | Putting metal 7 mm (10 pcs) |
1 x | Rivette Ø 3,0 mm (50 pcs) |
1 x | Glases Flitemaster |
1 x | Propeller RABOESCH.Ms 70L (5 Blades) (Left hydropropeller) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
3 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Motor DLE 120 cc |
1 x | DC-3 Douglas (DAKOTA) 1800 mm |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
3 x | 30 cm BEC cable (female) |
1 x | FOD Screen K45/60/70/85 |
1 x | Fod Guard 83x32 mm |
2 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Ringöse 12 mm (50 pcs) |
1 x | Rangefinder 39x20 mm (2 pcs) |
2 x | Rejas metal 40 mm |
2 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | Rudder 10 mm |
2 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | Rivette Ø 2,0 mm (50 pcs) |
3 x | Servo slow down unit (0,7-14,7 sec ) |
2 x | NF-3X-80 liner Kit |
1 x | Racor hembra 4/5 mm |
3 x | NF-2 RC set |
2 x | NF-3m Heli Kit |
1 x | Propeller RABOESCH.Ms 60L (5 Blades) (Left hydropropeller) |
2 x | NF-1 RC set |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Propeller RABOESCH.Ms 60R (5 Blades) (Right hydropropeller) |
1 x | Red position light 3V 7x2 mm (2 pcs) |
1 x | Propeller RABOESCH.Ms 35mm/M4r 5-BL (rigth hydropropeller) |
2 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Repair set for RAB0108-31 |
1 x | Red-Green position light 3-6V 35 mm (2 pcs) |
1 x | Ringöse 10 mm (50 pcs) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Motor DLE 170 cc Twin |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Canister combo DLE 111 cc |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
2 x | Fuel line plugs (Blue) |
2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Motor DLE 30 cc V2 |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Canister combo DLE 55 cc |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | USB Adaptor OPTronics |
1 x | Aceite AEROSHELL 500 SE Turbina 0,9 kg |
2 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | YAK-23 "FLORA" (RBC Kits) |
1 x | DORNIER DO 335 EP ARF 1724 mm |
1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
1 x | Servo HITEC HSB-9380TH |
1 x | Electronic fog horn |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace) |
1 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | PowerBox SparkSwitch RS |
1 x | Mounting frame MPX female connector |
1 x | DRACO 2.0m BNF |
1 x | FunCub NG verde RR |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | M3 black washers (4 pcs) |
1 x | Motor ACTRO 28-3-1300 |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace) |
1 x | Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace) |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Lightweight aircraft wheel, 45x18.5x2 |
1 x | Radial mount for electric 2.5-5.6 |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Fan for A60 |
1 x | Racor 3/3 mm |
1 x | Racor 4/3 mm |
1 x | Body for landing gear Ø 3 mm |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Wheels 270mm (2 pcs) |
2 x | Superlight wheel 100 mm with valve (2 pcs) |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | SIG Coverall 1.2x0.9 m |
1 x | SCHOCKJET ARF 2.050 mm |
1 x | Vess propeller 11x7 S |
1 x | Regulador Jeti Jes 045 |
1 x | USB Interface Adapter |
1 x | Servo HITEC HS-5805 MG Digi |
1 x | Gear set HITEC HS-55 |
1 x | Motor D.A. 200 Magnesium |
1 x | Servo HS-5765MH High Voltage |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | PowerBUS Lead 30 cm |
1 x | DA 70 Twin Gas Engine |
1 x | Motor DA 120 |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | ESC 40A. Opto starter Kolm |
1 x | DLE 85 Ignition unit |
1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | Piston ring for DLE-20 RA |
1 x | Hub DLE 30 |
1 x | TopFuel LiPo 25C-ECO-X 1800mAh 2S |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | Screwdriver for Torx® TX8 |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Racor 2/3 mm |
1 x | NoNa BB wheel Ø105x35mm in pair |
1 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
2 x | Jet wheels 65 mm E-brake 4 mm shaft |
2 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
2 x | Wheel FEMA 127 mm / 6 mm |
1 x | Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | 400 Newtons FEMA absorber |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | Charger LiPo Charger4 |
1 x | SIG Coverall 1.2x1.8 m |
1 x | POLARON EX 800w charger |
1 x | Solarfilm Lite blue transp. 5m |
1 x | Piston ring for DLE-20 |
1 x | Kardan Black (without pinions) |
1 x | Electric Landing Gear FELIX SporJet 2.200mm |
1 x | Motor A200-6 |
1 x | PC-21 XXL 3.395 mm |
1 x | Q80-13S 20-Pole F3A |
1 x | Motor A200-8 |
1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
2 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Plastic wheels 36 mm (2 pcs) |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Propeller AERO-NAUT M4 60 mm (3 Blades pr) (Right hydropropeller |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Antiaircraft gun 3.7 cm (5 pcs) |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Propeller RABOESCH M4 60 mm (4 Blades) (Right hydropropeller) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Cancamo Ms 7 mm (50 pcs) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | Adaptadores carga 6s JST-XH |
1 x | Propeller RABOESCH M5 100 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Left) |
1 x | Pipa BULL MØ1 2.600mm |
2 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Top light bright 10mm/3V (2 pcs) |
1 x | Plastic wheels 30 mm (2 pcs) |
2 x | Pile railing 2D/35 mm (10 pcs) |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | Propeller AERO-NAUT M4 65 mm (6 Blades pr) (Right hydropropeller |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left) |
1 x | Klumpblock (Plastik), Höhe 3 mm, 1 Rille, 20 Stück |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Spark Ceramic JETCENTRAL |
1 x | Pipa 3D F-16 Scale 1/6 |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Hose connector stopper 4 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | PBS TJ 100P Turbine |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | NoNa BB wheel Ø200x60mm in pair |
1 x | Superlight deluxe wheel 50 mm (2 pcs) |
1 x | Superlight deluxe wheel 56 mm (2 pcs) |
1 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | Superlight standard wheel 100 mm (2 pcs) |
1 x | Mini wheels (3 pcs) |
1 x | Plastic wheels 28 mm (2 pcs) |
1 x | Super light ∅45x9 mm axi ∅3 mm metalic core wheel |
1 x | Superlight deluxe wheel 68 mm (2 pcs) |
1 x | Superlight deluxe wheel 75 mm (2 pcs) |
1 x | 3,0x60 mm allen screwdriver |
1 x | NF-3X-350 set |
2 x | Pilotes planos 24mm (20 pcs) |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Low line 74 mm |
1 x | Metal hook for loading arm, 9mm high, 10 pcs |
1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
1 x | Marco de medición doble 35 mm (2 pcs) |
1 x | Pile railing 2D/48 mm (10 pcs) |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | Picas 12 mm (20 pcs) |
1 x | 42,0 mm propeller (rigth propeller) |
1 x | Pilote barandilla 3D/11 mm (10 pcs) |
1 x | Motor Johnson 650 with L base and reducer 1,94:1 |
1 x | Propeller 4BL 60 mm M4 plastic Right |
1 x | Pile railing 2D/30 mm (10 pcs) |
1 x | 12 mm mast holder |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left hydropropeller) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Propeller AERO-NAUT M4 70 mm (6 Blades pr) (Right hydropropeller |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Propeller RABOESCH M5 60 mm (4 Blades) (Left hydropropeller) |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | Propeller AERO-NAUT M4 73 mm (7 Blades pr) (Right hydropropeller |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Propeller RABOESCH M5 60 mm (4 Blades) (Right hydropropeller) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Propeller RABOESCH M4 45 mm (4 Blades) (Right hydropropeller) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Propeller RABOESCH M4 55 mm (5 Blades) (Right hydropropeller) |
1 x | Campana Ms 14 mm (5 pcs) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Propeller Ms 65L (left propeller) |
1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
1 x | Wood grids 30x100 mm (30 pcs) |
1 x | Pipa 3D BULL MØ1 2.600mm |
1 x | Ignition RM-25V |
1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
1 x | RM-85FSI 4-stroke inline gasoline engine |
1 x | Motor ROTO-35 FS BM 4T |
|
277,017.08EUR |