2 x | Gates hinge |
1 x | Large flex hinge (12 uds) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | Indoor hinge with servo arm integraded |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 15 mm reinforced hinge |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Pin hinge 26x11 mm (10 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Flap hinge (6 pcs) |
3 x | Long pinned hinge (12 uds) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
4 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Medium pin type hinge (12 uds) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Gates hinge aluminium (1 pcs) |
2 x | 18 mm reinforced hinge |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
3 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | TrainerCord (master-learner) |
1 x | 30 cm BEC cable (male) |
1 x | 2 LiPo XH>EH adapter |
1 x | Adapter lead MPX/EC3 |
2 x | CM-3 |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Starter EM Gear Power 80 |
1 x | CC 01 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 3 LiPo XH>EH adapter |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Adaptadores carga 6s JST-XH |
1 x | Circlick securite |
1 x | MPX-Dean "T" Adapter |
1 x | Dean "T" - Futaba Adapter |
1 x | Turbina KINGTECH K320 G5 |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | 4 LiPo XH>EH adapter |
1 x | USB HLS prog. interface |
1 x | Xplorer3 anemometro |
2 x | Xplorer2 anemometro |
1 x | Conector MR-60 (pareja) |
1 x | Extension MPX-MPX 20 cm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
2 x | ABS angle 3,0x3,0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 25 mm reinforced hinge |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | DYNAMOMETER S-1580 |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Circlick securite |
1 x | Futaba male 40 cm extension |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Extension lead 15 cm Multiplex |
1 x | Blind nut M4 (4 pcs) |
1 x | Extension 90 cm (Futaba) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Blind nut M6 (4 pcs) |
2 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Blind nut M6 (4 pcs) |
1 x | Extension silicon 75 cm (Futaba) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Extension 100 cm (Futaba) |
1 x | Extension silicon 35 cm male (Futaba) |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Extension silicon 10 cm (Graupner) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Jeti Black cap |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | LOWER TOW HOOK |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 30 cm BEC cable (female) |
1 x | Ball Link Plier |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | MG cannon 1.8 cm (5 pcs) |
2 x | Digital precision scale up to 2000 g |
2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
2 x | 3.2 mm Prop Adapter M8 |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Prop Holder AXI 41xx V2 |
2 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
2 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Refueling Cap V3 Black |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Oracover Black 10 m |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | Profile ABS half cane 8.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Crimping tool |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | ABS angle 6,0x6,0x1000 mm |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | |
3 x | Xplorer4 anemometro |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Big Crow DLE-170M |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn with ball 40x30 |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | M3 black washers (4 pcs) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Socket Screw M3x9 mm |
2 x | Flat washer 2.2 mm (20 pcs) |
3 x | Lock nut M2 (10 pcs) |
2 x | MR30 connector female |
1 x | Clamp K30 G3 |
1 x | KingTech T-Modul 5 in 1 Telemetry |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Turbina KINGTECH K70G4 |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Turbina KINGTECH K142 G4M |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | KingTech Turbineoil 5L |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Spinner propeller pleg. 36 mm / 5,0 mm |
1 x | 50 mm black plastic spinner for fixed propeller |
3 x | 36 mm red plastic spinner for fixed propeller |
3 x | Xplorer1 anemometro |
1 x | Battery LiFe -2100/25C-3S 9.9V |
1 x | White spinner propeller pleg. 42 mm / 6 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | Burner Plug K30/ K45 |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Battery LiFe -3000/25C-3S 9.9V |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 5,0 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Exhaust K45TP |
1 x | White spinner propeller pleg. 50 mm / 6 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Spinner propeller pleg. 42 mm / 3,0 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Bomba KP500V Kingtech |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | White spinner propeller pleg. 55 mm / 6 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | MR30 connector male |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
3 x | Filter KingTech |
3 x | KingTech Turbineoil 10L |
2 x | Scale exhaust K100TP |
3 x | GSU Kingtech |
2 x | KingTech Turbineoil 1L |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Spinner propeller pleg. 45 mm / 4,0 mm |
1 x | Spare white 38-45 mm spinner |
1 x | White spinner propeller pleg. 42 mm / 4 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Turbine KingTech K30G Restart |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
2 x | Turbine KINGTECH K85 G4 |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Turbina KINGTECH K260 G5 |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
3 x | Turbine KINGTECH K100 G4 |
3 x | KingTech K45TP G4 Turboprop |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
2 x | KingTech K100TP G4+ Turboprop |
1 x | Battery LiFe -1450/25C-3S 9.9V |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 2,0 mm |
2 x | Battery LiFe -3800/25C-3S 9.9V |
2 x | 40 mm white plastic spinner for fixed propeller |
3 x | 36 mm white plastic spinner for fixed propeller |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | |
1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Turbina KINGTECH K55G4 |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | 42 mm white plastic spinner for fixed propeller |
1 x | Spinner plastic white fixed propeller 30 mm |
3 x | 36 mm black plastic spinner for fixed propeller |
2 x | 12V Car Adapter |
3 x | 45 mm black plastic spinner for fixed propeller |
2 x | Charger 220/110v |
3 x | 42 mm black plastic spinner for fixed propeller |
3 x | Spinner plastic black fixed propeller 30 mm |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | Futaba BLS152 - Upper Case |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Futaba Radio Case |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | Futaba Prop Module F14 |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Adapter 3,2 mm M6 |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Allen wheel collar M4x4 |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Chopped glass fibre strands 3 mm |
1 x | ER-40eVo Set A [2x ER40 + RB-45] |
1 x | Servo HITEC HS-485 HB |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Propeller 3x3 |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | ZEUS F3A 2m |
1 x | Adapter 4,0 mm M8 |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Servo HITEC HS-225 MG |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo HITEC HS-5084 MG |
1 x | Servo HITEC HS-325 BB |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo HITEC HS-45 HB |
1 x | Servo HITEC D954 TW |
1 x | Servo HITEC HS-53 |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | HITEC DPC-11 programmer |
1 x | Servo HITEC HS-5087 MH |
1 x | Servo HITEC D145 SW |
1 x | Servo HITEC D131 MW nano |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Threaded insert M5 (10 pcs) |
1 x | Turbina KINGTECH K120 G4 |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Aluminium servo arm (2 uds) |
2 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
2 x | BOEING 727, Retract set for Boeing 727 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Antenna 50 mm (2 uds) |
1 x | Cable video GoPro |
1 x | Chigre de amarre Scale 1:32 |
1 x | Cleat 15 mm (2 pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
2 x | 89 mm aluminium spinner. |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Esc MasterSPIN 70 Pro OPTO |
1 x | Spinner 115 mm GFK |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
2 x | FOD Screen K140G/K180G/K210G |
1 x | |
2 x | 3D Spinner for DLE 30 |
1 x | 45 mm aluminium spinner. |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Socket Head Screw M2,5x12 |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Hot Glue Stick RED |
2 x | BOEING 727, Electric brake 28mm + controller |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Telemetry interface ALTIS to Futaba |
1 x | 5 mm Prop Adapter M6 |
1 x | 40 mm white plastic spinner for folding propeller |
1 x | 45 mm white plastic spinner for folding propeller |
1 x | Doppelpoller 7 mm plastic (10 uds) |
1 x | Cleat 10 mm (2 pcs) |
1 x | 75 mm |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Double BLOCK 3x9x5 mm (3 pcs) |
1 x | Cornamusa 8 mm plastico (10 pcs) |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | 22m Fitting barb |
1 x | Spinner 140 mm GFK |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Master MEZON 120 |
1 x | Esc X-30-Pro BEC |
1 x | Esc KOSMIK 210 HV-I COOL |
3 x | 45 mm white plastic spinner for fixed propeller |
1 x | Program card KAVAN PRO |
1 x | Spinner plastic red fixed propeller 30 mm |
2 x | ESC MEZON 115 Opto |
1 x | Spinner 110 mm GFK |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Socket Head Screw M2x10 |
1 x | Threaded insert M3 (4 pcs) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Socket Head Screw M2x12 |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Socket Head Screw M2x5 |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Scale exhaust K45TP |
2 x | Turbina KINGTECH K180 G4+ |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Dust collector for mould cleaning |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Baseplate servo |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Hot Glue Stick GREEN |
2 x | BOEING 727, Jet pipe for Boeing 727 |
2 x | BOEING 727 kit |
1 x | Z Bender - S Type Tool |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Hot Glue Stick BLACK |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Davit 70 mm (2 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Bungee HLG Premium |
1 x | Anchor 25 mm (2 uds) |
1 x | 6x4 tree blades propeller |
1 x | Anchor 50 mm (2 uds) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Compass Ø 15 mm (20 pcs) |
1 x | Central piece 72 mm 0º |
1 x | LiPo Storage Box Type "P" |
1 x | USB Mini Camera endoscope |
1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
1 x | 33,0 mm propeller (left propeller) |
1 x | Blind nut M8 (10 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Central piece 47 mm 0º |
3 x | 50 mm white plastic spinner for fixed propeller |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Telemetry interface ALTIS 20 cm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Robart Door Hinge (Pk2) |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Central piece 42 mm - 2,5º |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
1 x | 25 mm carbon servo arm |
1 x | Carburator Moki S400 |
1 x | Central piece 52 mm - 2,5º |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Sensor Ignition RCEXL Universal |
1 x | Device Terminal |
1 x | LiPo Storage Box Type "BIG" |
1 x | Ancla metal 40 mm (2 uds) |
1 x | Central piece 52 mm + 2,5º |
1 x | 9x7 tree blades propeller |
1 x | 5 mm Prop Adapter M8 |
1 x | ALU servo arm 3 mm shaft |
1 x | Central piece 42 mm + 2,5º |
1 x | Electric Fuel Pump 12V |
1 x | Deck Lamp with Reflector Ø 22 mm 3 V |
1 x | 4 mm Prop Adapter M8 |
1 x | Carburator Moki S250 |
1 x | Smoke pump RCEXL |
2 x | Turbine KINGTECH K160 G4 |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Central piece 47 mm - 5º |
1 x | 5 mm Prop Adapter M8 |
1 x | Central piece 42 mm 0º |
1 x | TMM 1210-3S heli |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Spinner 100 mm GFK |
1 x | 110x55 mm SLH KOVO wheel |
1 x | ESC Ripmax QUANTUM 80A SBEC |
2 x | 70 mm aluminium spinner. |
1 x | 800TVL CMOS camera for FPV |
1 x | Esc master MEZON 120 Lite |
1 x | 102 mm aluminium spinner |
1 x | Spinner 60 mm GFK |
1 x | Servos security connector (2 pcs) |
1 x | 1/6 Pilot "Buddy" |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | Air pressure gauge |
1 x | Esc MasterBasic 90 Opto |
1 x | Esc X-40-SB-Pro |
1 x | 1/12 Pilot "Langley" |
1 x | Esc MasterSPIN 80 Pro |
1 x | USB interface ALTIS |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | 1000 cc gasoline fuel tank complet |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Turbine KingTech K45G4+ |
2 x | 75 mm spinner (Carbon Imitation) |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 1/6 Pilot "Cindy" |
1 x | 82 mm aluminium spinner. |
1 x | Spinner 125 mm GFK |
1 x | KOBY 70 LV Esc |
1 x | Spinner plastic white fixed propeller 42 mm |
1 x | ESC KAVAN PRO-160HV Opto 160 Amp |
1 x | Program Card KAVAN ES |
1 x | ESC KAVAN R-80SB SBEC 80A |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | 95 mm aluminium spinner. |
1 x | 60 mm aluminium spinner (Kavan) |
1 x | 45 mm aluminium spinner (Kavan) |
1 x | 64 mm aluminium spinner |
1 x | Nut hélice Largo 2.25" (5.7 cm) |
1 x | 57 mm aluminium spinner. |
1 x | 50 mm aluminium spinner (Kavan) |
|
93,883.47EUR |