9.00EUR

5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
[TC2231]


5 mm Self adhesive Pinking Tape, saw tooth height 0.5 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
5 x Servo TOPMODEL STANDARD S3217
5 x 90x75 mm standart servo cover
3 x 50x45 mm micro-mini servo cover
2 x 58 mm micro servo cover
4 x 90x60 mm standart servo cover
3 x Servo TOPMODEL DS9010 T
3 x 13 mm wing servo holder
2 x 18 mm wing servo holder
1 x Servo TOPMODEL S7520 MG
3 x 65 mm mini servo cover
2 x 11 mm wing servo holder
1 x Servo HBS 690BB HV Digital
1 x SERVO DES 806 Pignons
1 x SERVO DES 707 BB MG, Pignons
2 x SERVO DES 707 BB MG
1 x SERVO DES 568 MG
1 x Soporte metal para servos
2 x Cockpit plastic closing
1 x Steering arm 12 mm Ø 4 mm
2 x Cierre cabina aluminio Ø4, I=10 mm
1 x Screw-lock connector M2 (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Cap closure 33/23.5mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (20 m)
2 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x Locking cable tie 2.5x100 (uds)
2 x Steering arm 16 mm Ø 4 mm
1 x Steering arm 16 mm Ø 3 mm
3 x 57 mm micro-mini servo cover
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x ABS Strip 1.5x2.0x1000 mm
3 x Strip 2,5x1,25x330 mm
1 x ABS Strip 1.5x6.0x1000 mm
2 x Round Rod 1,0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
3 x Round Rod 4,0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
3 x Strip 3,5x1,75x330 mm
1 x SE Ring 350 mm (2 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 450 mm (2 pcs)
1 x Cinta Goldfix 1m
1 x Tape GFK 38 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
2 x SE Ring 250 mm (2 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x Spikes Band (5 m)
1 x Ring 320 mm length (5 pcs)
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x Foil for sticking flaps and ailerons
1 x SE Ring 360 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 200 mm (2 pcs)
1 x 
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Servo HITEC HS-53
2 x Lock washer 2.7 mm (20 pcs)
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Spring lock washer 2.1 mm (20 pcs)
2 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Servo HITEC D954 TW
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Servo HITEC D950 TW
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Servo HITEC HS-325 BB
1 x Servo case HS-225MG/225BB/5245MG
1 x Servo HITEC HS-125 MG
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Servo HITEC D145 SW
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Servo HITEC HS-5585MH
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Servo HS-5070 MH Hi Volt
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Flat washer 2.2 mm (20 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Servo HITEC HS-225 BB
1 x Servo HS-5565MH High Voltage
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Servo HITEC D131 MW nano
1 x Servo HITEC HS-5485 HB Digi
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Propeller balancer
1 x Green smoke canister 65 g
1 x Micro flex hinge (12 uds)
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Support Pitot JETI
1 x Support conector MPX (6 pcs)
2 x One touch canopy lock
2 x Split pin 1.6x16 mm (10 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
3 x Snap pin for micro clevis (10 uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Cable grommet Ø 5 mm (4 uds)
2 x 38x4,5 mm wires output (2 pcs)
1 x Locking cable tie 4.6x203 (uds)
2 x SUS wire 3m (nylon coated)
1 x Landing gear frontal support 25x32x16
2 x Cable grommet Ø 4 mm (4 uds)
2 x Canopy Lock V1 M3 Red (2 pcs)
1 x Cable grommet 9.5 mm (4 uds)
1 x Blind nut M5 (4 pcs)
1 x Lock washer 2.2 mm (20 pcs)
2 x Round Rod 1,5x1000 mm
2 x ABS I Strip 10x5x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
3 x Round Rod 1,25x1000 mm
2 x Strip 2,0x2,0x330 mm
1 x Round Rod 2,0x1000 mm
1 x HITEC 17 mm servo arm with ball link HITEC
1 x Adapter rotula M3
2 x 500 ml sealer (DOPE)
2 x PARTALL® Hi-Temp Wax, 340 g
1 x ABS Strip 1.5x8.0x1000 mm
3 x Round Rod 2,5x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
2 x ABS Strip 1.5x3.0x1000 mm
1 x Blind nut M5 (10 pcs)
2 x Hexagonal Nut M2 (10 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Blind nut M2 (10 pcs)
1 x Pan head screw M2x16 PH
1 x Hexagonal Nut M3 (10 pcs)
1 x Pan Head Screw M2x6 PH
1 x Screw M2.5x5 (10 pcs)
1 x Servo TOPMODEL DS1413 T
1 x Quicklock washer 4 mm (10 pcs)
2 x Pan Head Screw M2x8 PH countersunk head
1 x Socket Screw M3x9 mm
1 x Servo HITEC HS-311
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Screw KB 1.4x6 mm (10 pcs)
1 x Threaded insert M4 (4 pcs)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x 41x5,5 mm wires output (2 pcs)
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x Tip wing protector 40x14 (2 pcs)
1 x 11 mm Rubber pads (14 pcs)
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x METEOR 1.000 mm kit
1 x 10-15mm Servo Arm HITEC
1 x Suncover 100cc Red
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x 20-25mm Servo Arm
1 x Servo Robbe FS 525 BB MG HV
1 x 100 mm rods set for direction control
1 x 90 mm rods + T patellas set for direction control
1 x Motor OS 3820-1200 electric
1 x Cockpit aluminium closing 4.7g
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x Wing bolts M6 Steel screw Blue (2 pcs)
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x Pushrod octagone 4/3
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
2 x Allen wheel collar M4x4
1 x Cockpit aluminium closing
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Wheel collar 6 mm Ø (4 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Wing bolts M3 Steel screw Red (2 pcs)
2 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Wheel collar 3 mm Ø (4 uds)
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x PHASOR RACE 2035/2100 2D
1 x Lead with adhesive (2 pcs)
1 x 140 mm rods + T patellas set for direction control
1 x Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x Allen wheel collar M3x5
1 x Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x Partall paste 650 g
2 x Spray adhesive AEROFIX 2
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x PHASOR RACE 2035/4100 1D
1 x Triple rod con. 2mm Pushrod (2 pcs)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Snap for floding prop for 2 mm axi
1 x Split pin 1x8 mm (10 uds)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Snap short M2 (10 uds)
1 x Allen wheel collar M4x6
1 x ABS Strip 1.0x3.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x Hobbylite Filler, Balsa colour
1 x Plasti Dip Liquid Tape 429 ml black
1 x 25x10 BIELA propeller (3-blades) Corsair Scale
1 x Gear set HITEC HS205/225MG/5245MG/7245MH
1 x ABS "T" angle 4.0x4.0x1000 mm
2 x Round Rod 3,0x1000 mm
1 x L-shaped servo mount
1 x Solvent Plasti Dip 1000 ml
1 x Universal Colour Paste deep black 250 g
1 x 1000 ml sealer (DOPE)
1 x 20 g tin paste
1 x Painting GHT Lexan Black 150 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Spannlack 1000 ml
1 x Spray Graphit 33
1 x Universal Colour Paste white 50 g
1 x Plasti Dip Liquid Tape 429 ml black
1 x Nitroverdu 500 ml
1 x Universal Colour Paste deep black 50 g
1 x Motor A2212/13T
1 x SE Ring 400 mm (2 pcs)
1 x 26x18 BIELA propeller
1 x 17x10 BIELA propeller (3-blades)
1 x 23x8 BIELA propeller
1 x 17x10 BIELA propeller SCALE (3-blades)
1 x 26x12 BIELA 3Bl Pusher propeller
1 x 18x10 BIELA 3Bl propeller (3-blades)
1 x 19x8 BIELA propeller
4,795.69EUR
Manufacturers
Manufacturer Info
Toni Clark
Toni Clark Homepage
Other products
Languages
Español English
Currencies