7.00EUR

26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
[TC2228]


13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Cable S.BUS 3 salidas 100 mm
1 x Spannlack 1000 ml
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Extension silicon 35 cm male (Futaba)
1 x Covered closure or fairings
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x PCARD Wireless System
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x ABS tube 6.0x5.0x1000 mm
1 x Nitroverdu 500 ml
1 x BALSA triangular 15x15x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x "S" set for boats
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 3 LiPo XH>EH adapter
1 x Trailing edge BALSA 35x8x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Short ball link M3 (6 uds)
1 x Pine wood slat 10x10x1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Parachute expulsion foam
1 x Flap hinge 33x9 mm (6 pcs)
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x ABS tube 3.0x2.0x1000 mm
2 x SE Ring 360 mm (2 pcs)
1 x 
1 x Support pumb/filter Xicoy X45
1 x Horn for flap control (1 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Actuador lineal HLS12-100210-7.4v
1 x 20 mm carbon horn
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x SE Ring 240 mm (2 pcs)
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Sukhoi 29S 2,6 m White/Blue (SebART)
1 x EDGE 540-A 105" (2660 mm)
1 x Balsa panel 2.5x100x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x 115x29 mm (4.50") Type jets aluminium core wheel
1 x 120x60 mm C SLH KOVO wheel
1 x Support Flush MPX Conector (6 pcs)
1 x 64x20 mm (2.5") Type jets aluminium core wheel
1 x Xplorer3 anemometro
1 x 90x45 mm hard foam KOVO wheel
1 x 100x50 mm SLH KOVO wheel
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 480 mm (2 pcs)
1 x Balsa panel 8.0x100x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Balsa panel 10x100x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x BALSA trip 2.0x10.0x1000 mm
1 x Joint with bearing M2,5 22x5,5
1 x A/C quality beech plywood 600x300x6.0 mm
1 x BALSA triangular 6x6x1000 mm
1 x Long ball link M1.6 (6 uds)
1 x Long ball link M2 (6 uds)
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Socket head ball link M3 (2 uds)
1 x Micro Crystal RX 35.120 Ch 72
1 x PPS-4D Propeller
1 x Micro Crystal RX 35.010 Ch 61
1 x Support FUEL DOT V3
1 x 73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x Soporte grifo FESTO (2 pcs)
1 x 76 mm light wheels (2 pcs)
1 x Support Filtro FESTO
5,617.30EUR
Manufacturers
Manufacturer Info
Toni Clark
Toni Clark Homepage
Other products
Languages
Español English
Currencies