2 x | Green smoke canister 100 g |
2 x | Red smoke canister 140 g |
2 x | 3l Smoke oil |
2 x | Ventral support for AX-18/AX-60 |
3 x | White smoke canister 100 g |
2 x | Green smoke canister 140 g |
1 x | Parachutist |
3 x | B4-0 rocket charges (6 pcs) |
1 x | Parachute expulsion foam |
3 x | White smoke bombs AX-9 (10 pcs) |
1 x | Smoke set "S" |
2 x | Blue smoke canister 140 g |
2 x | Initior Receiver FRX2 Wireless |
2 x | "M" set |
2 x | Smoke set "M" |
3 x | Initior Transmitter FTX2 Wireless |
3 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | "S" set for planes |
2 x | Red smoke canister 65 g |
2 x | White smoke bombs AX-3 (10 pcs) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | White smoke canister 140 g |
1 x | Electric rocket starters (6 pcs) |
2 x | 1/12 Pilot "Fighter" |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Yellow smoke canister 100 g |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Remote electric ignition system |
3 x | 1/4 Pilot "Heidi" |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
3 x | Locking cable tie 3.2x142 (uds) |
2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | 1/12 Pilot "Cougar" |
4 x | Wing tips support for AX-18/AX-60 (2 pcs) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | AX-60 starters (5 pcs) |
1 x | "S" set for boats |
2 x | Covered closure or fairings |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | 1/6 Pilot "Buddy" |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Yellow smoke canister 140 g |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Piloto Jet "Red" 1/6 Scale |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Yellow smoke canister 65 g |
3 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Red smoke bombs AX-60 (5 pcs) |
2 x | 1/6 Pilot "Garry" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Screw-lock connector M2 (2 uds) |
3 x | Steering arm 12 mm Ø 4 mm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
4 x | 1/6 Pilot "Tony" |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Cockpit plastic closing |
2 x | Pilot "Goose" (Slimline) |
1 x | 1/4 Pilot "Mike" |
1 x | 1/6 Pilot "John" |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Piloto jet 130 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Flap hinge (6 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Micro flex hinge (12 uds) |
1 x | 15 mm reinforced hinge |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Vest clothes Hispano Aviación |
2 x | Shirt Hispano Aviación |
2 x | Cap Hispano Aviación |
1 x | |
1 x | Crimping tool |
1 x | Cut tube |
1 x | Ball Link Plier |
1 x | 1,5x50 mm allen screwdriver |
1 x | Vacuum pump 12 CFM |
1 x | Digital precision scale up to 2000 g |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Screwdriver for Torx® TX8 |
1 x | Vacuum pump P1-N |
1 x | Tape GFK 25 mm |
1 x | Oracover Verde 2 m |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Medidor ángulos y/o incidencias |
2 x | Green smoke canister 65 g |
1 x | Jeti Black cap |
1 x | ABS tube 16.0x14.0x1000 mm |
3 x | PCARD Wireless System |
2 x | Red smoke canister 100 g |
3 x | Steering arm 16 mm Ø 3 mm |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | 38x4,5 mm wires output (2 pcs) |
2 x | One touch canopy lock |
2 x | AX-60 starters (5 pcs) |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Smoke set "Glider" |
1 x | 1/6 Pilot "Cindy" |
1 x | Pilot "Anthony" (Slimline) |
2 x | Allen wheel collar M3x5 |
1 x | White smoke canister 65 g |
2 x | Clip mini fixing for wing (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Blue smoke canister 100 g |
2 x | Clip fixing for wing (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
2 x | 45 mm rods set for direction control |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Pushrod octagone 4/3 |
2 x | Power supply NT 25 Amp. |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Robart Door Hinge (Pk2) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 1/12 Pilot "Tom" |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | 100g Flux Paste for Silver Solder |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | 2,5x60 mm allen screwdriver |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | BALSA triangular 10x10x1000 mm |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Balsa panel 8.0x100x1000 mm |
1 x | Control for forward wheel (MINI) |
1 x | IKARUS plane |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | BABY glider drawings (Aero-naut) |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m |
1 x | Albatros red/white (Top Model) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | FANTASY ARF 3.2m |
3 x | SkyMaxx 1.550 mm (kit) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | 21x14 Falcon electric carbon prop (64 g) |
2 x | 20x15 Falcon electric V2 |
2 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
2 x | DOMINO 46-55 Trainer 1583 mm |
2 x | BULLIT Wing 1095 mm |
2 x | BOOMERANG II 40/46 ARF 1.55mm |
2 x | SCANNER 46-55 Sport Scale 1:7 ARF |
2 x | BULLIT Wing 840 mm |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | eFuel 30A Power Supply |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Sealing Iron Sleeve STD |
1 x | Motor A50-16 S V4 |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | Split M1,2x10 (10 pcs) |
2 x | Snap long M2 (10 uds) |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | BIG MOSNTER |
1 x | ENIGMA ARF |
1 x | IKURA GPS 4.28 m |
1 x | Canopy Sweet / Siesta |
1 x | Tube bender |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Motor A40-10S V4 14-Pole |
1 x | Starter EM Gear Power 80 |
1 x | Spinner plastic black fixed propeller 30 mm |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Steel brush wheel with 2.35mm |
1 x | 42 mm white plastic spinner for fixed propeller |
1 x | Starter EM Gear Power 250 |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Bungee HLG Premium |
1 x | Vasa model Catapult |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Opale Rucksack |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Ballast 700gr OPALE |
1 x | Pine wood slat 10x10x1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Motor A20-26 M EVO |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Paramotor Trike XL |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Wing OXY 5,0 m2 |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Aramid 50 daN 50 m |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Challenger ARF (Top Model) |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | Avia (Top Model) |
1 x | Propeller APC 12x8 Glow/Gas |
2 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | Propeller APC 10x4 Glow/Gas |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Bujia OS G5 gasolina |
1 x | Ferrita 14x8x5.5 mm |
1 x | Blades 330mm |
1 x | Brake for 140 mm wheels |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | 18m Fitting barb |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Junta humo metalica G35 DLE35 |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | 3-blades 28x12 carbon prop Super Silence |
2 x | Compact on-board starting system (9715) |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | Propeller CFK 13x7.5 |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | 22x10 BIELA propeller |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 26x8 BIELA propeller |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Propeller CFK 14x6.5 |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 15x7 |
1 x | Propeller CFK 20x13 |
1 x | TRAINER RC Pilot V2 90" w/r ARF |
1 x | Propeller CFK 23x12 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Cockpit latch closing I=10 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | PC-21 PILATUS Spinner Scale Red 3 Blades |
1 x | Helice APC 14x4 W |
1 x | Fournier RF-4D |
1 x | DH82 Tiger Moth ARC Scale 1:3.3 |
1 x | PC-21 PILATUS Electric retract system |
1 x | Propeller APC 16x10 Glow/Gas |
1 x | Propeller APC 10x6 Glow/Gas |
2 x | PARAGON Trainer 46-55 1580 mm |
1 x | Vess propeller 13x6 S |
1 x | Ferrita con funda |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | 300 Newtons FEMA absorber |
1 x | 200 Newtons FEMA absorber |
1 x | Compact on-board starting system (9724) |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Cessna 310 Red #G-BBBX 3200 mm (CY MODEL) |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | SUPER CUB 2640 mm |
1 x | 30/11-26 Zoll, 3-Blade Scale |
1 x | Mitsubishi ZERO AM6 91 ARTF |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | DLE 30 complete electronic ignition |
1 x | Secraft Fuel system v2, red color |
1 x | Ignition bed V2 Red color |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | Small adjustable control horn with bearing |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | FIALA Propeller 24x12 |
1 x | 22x12 BIELA propeller (3-blades) |
1 x | 16x8 BIELA propeller (4-blades) Corsair Scale |
1 x | 18x10 BIELA pusher propeller |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | 26x18 BIELA propeller |
1 x | 22x8 BIELA propeller |
1 x | 22x10 BIELA pusher propeller |
1 x | Propeller RF CFK 13x6.5 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Propeller CFK 18x16 |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 12.5x6.5 |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | 80 mm rods set for direction control |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Snap for floding prop for 2 mm axi |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Cockpit aluminium closing |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | BU 131 Jugmann ARC |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Sparkplug ROSSI R8 |
2 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Spark motor OS nº 8 |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | Propeller APC 12x6 Glow/Gas |
1 x | Ferrita 27x14x7 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Mudguard for 140/165 mm wheels |
2 x | Compact on-board starting system (9525) |
1 x | L-shaped servo mount |
1 x | Absorver mount set for 5-10 Kg models |
1 x | 100 Newtons FEMA absorber |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Compact on-board starting system (9512) |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | 150 Newtons FEMA absorber |
1 x | Mudguard wheels 112/127 mm |
1 x | Servo holder for retract |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Restrictor FESTO 3/3 mm |
1 x | 400 Newtons FEMA absorber |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Compact on-board starting system (9713) |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Fokker DR-I 2400 mm (CY model) |
1 x | Spring Clip Ø25 mm |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | 1000 ccm gasoline fuel tank |
1 x | Hose clips 6 mm |
1 x | Air Trap Mounting - 175ml |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Cessna 310 3200mm Electric Landing gear complet (CY model),< |
1 x | PHOENIX FW-190 FOCKE WULF - 1720 MM ARF KIT |
1 x | FW-190 2400mm Electric Landing gear complet (CY model), |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | F8F Bearcat #201 2.460 mm |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Electronic double valve landing gear |
1 x | Fokker D-VIII 2800 mm R/W (CY model) |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | LightBox SR |
1 x | "Taxi Tank" Fuel Tank |
1 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | SAITO FG-36 carburetor |
1 x | 7.94 x 4.76 mm tygon tube 1 m |
1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | KAVAN Hand crank fuel pump |
1 x | Propeller VESS 32A |
1 x | Westland Lysander 50cc ARTF |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | 24x14 prop Super Silence |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Vess propeller 12x7 S |
1 x | Propeller VESS 27A |
1 x | Propeller FALCON 27x10 3-BL carbono-gas |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | Aluminium ignition bad (red) |
1 x | Propeller CFK 18x19 |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
1 x | Propeller RF CFK 10x17 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 100 mm rods set for direction control |
1 x | FIALA Propeller 28x10 |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Propeller RF CFK 16x8,5 S |
1 x | FIALA Propeller 25x10 |
1 x | Propeller CFK 12X6 |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Propeller CFK 17x13 |
1 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
1 x | 18x6 BIELA propeller |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Propeller RF CFK 14.5x14 |
1 x | FIALA Propeller 23x8 |
1 x | Propeller CFK 15.5x10 |
1 x | Propeller CFK 16x17 |
1 x | Propeller CFK 13x9 |
1 x | Propeller CFK 16x13 |
1 x | FIALA Propeller 27x10 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
1 x | 18x10 BIELA propeller |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 15x15 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Propeller RF CFK 13x7 |
1 x | 24x12 BIELA 3Bl propeller (3-blades) |
1 x | Allen wheel collar M4x6 |
1 x | 23x10 BIELA propeller |
1 x | Canopy Latch |
1 x | 23x10 BIELA propeller (4-blades) Scale |
1 x | 24x10 4Bl Scale |
1 x | FIALA Propeller 20x8 |
1 x | Propeller CFK 14x10 |
1 x | 28x10 BIELA propeller |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | 17x8 BIELA propeller |
1 x | Propeller CFK 14x8 Slim |
1 x | 26x16D BIELA 3Bl propeller (3-blades) |
1 x | 18x8 BIELA propeller |
1 x | 19x10 BIELA propeller (3-blades) |
1 x | Allen wheel collar M3x3 |
1 x | Propeller CFK 15x16 |
1 x | 23x8 BIELA propeller |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | Propeller CFK 11x8 |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Propeller CFK 17x18 |
1 x | 140 mm rods set for direction control |
1 x | 25x14 4Bl Scale |
1 x | 24x8 BIELA propeller |
1 x | FIALA Propeller 16x6 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 19x8 BIELA propeller |
1 x | FIALA Propeller 26x10 |
1 x | Allen wheel collar M4x4 |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 26x12D BIELA 3Bl propeller (3-blades) |
1 x | FIALA Propeller 18x8 |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Cockpit aluminium closing 5.4g |
|
51,214.86EUR |