0.00EUR

8 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
[TC2238]


8 mm Self adhesive Pinking Tape, saw tooth height 0.5 mm

The covering on full size aircraft is not only glued on with dope, but is sewn to ribs and stringers to achieve a stronger covering. The distance between the knots is variable. In high stress areas such as in the propeller wash, the knots are more closely spaced. For protection all edges and sewing are covered with pinking tape.
To improve the realistic effect of a scale, or semi scale model, the sewing is a deciding factor. It is a pity that a well built model is so often all too shiny and smooth, this is very boring especially on large antique models, which then do not appear to be very scale. Our Pinking Tape is made from a highly flexible, non shrinking white self adhesive film. This tape is applied before painting the model. For those who wish to go further, the knots can be simulated with PVA glue and a hypodermic needle.
On the full size Piper Cub the Pinking Tape was 50 mm wide over the ribs, and double so wide around the wing tips and tailplane edges, the saw teeth are approximately 2 mm high. The experts use the Pinking Tape #2237 with the 0,5 mm saw teeth. The fine toothed pattern is difficult to see on the model. On the full size it is no different. If one stands at the wing tip then the saw teeth on the fuselage are not visible to the naked eye. For he who would like more readily visible saw teeth can use the Pinking Tape #2223.
The Pinking Tape #2235 is just right for the Small Tiger and the tape #2223 for the Big Tiger.


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x SE Ring 200 mm (2 pcs)
2 x SE Ring HACKER 300 mm (2 pcs)
2 x Spikes Band (5 m)
2 x SE Ring 300 mm (2 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
3 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Tape GFK 25 mm
1 x 20x1000 mm Ring Strap Back To Back
2 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 450 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
3 x Cinta Goldfix 1m
2 x SE Ring 330 mm (4 pcs)
1 x Tape GFK 38 mm
4 x Tape GFK 50 mm
2 x Ring 320 mm length (5 pcs)
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x 20x200 mm battery rings
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 250 mm (2 pcs)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Extension 100 cm (Futaba)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Cabel "Y" 15 cm
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension 30 cm (Futaba)
1 x Extension 7.5 cm
1 x Extension silicon 30 cm female (Futaba)
1 x Futaba Female 40 cm extension
1 x Futaba male 40 cm extension
1 x Cabel "Y" 30 cm (Futaba)
1 x Premium servo extension 100cm
1 x Premium servo extension 25cm
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Circlick securite
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension PVC 150 cm (Graupner)
1 x Extension silicon 10 cm (Graupner)
1 x Cable S.BUS 3 salidas 100 mm
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Adapter lead MPX/EC3
1 x 30 cm BEC cable (male)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x CC 01
2 x APM2.6 Power module with 5.3V DC BEC
2 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x 4 LiPo XH>EH adapter
1 x 3 LiPo XH>EH adapter
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x CC 03
2 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Dean "T" - Futaba Adapter
1 x Futaba External voltage input cable Futaba CA-RVIN-700
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x TP/TopFuel - XH 2/3S Adapter
1 x 30 cm BEC cable (female)
1 x TrainerCord (master-learner)
2 x CC 02
1 x CC 05
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x USB HLS prog. interface
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x MPX-Dean "T" Adapter
2 x JETImodel SINGLE BEC
1 x BEC 3A FOXY
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x Canopy Lock V1 M3 Red (2 pcs)
1 x Foil for sticking flaps and ailerons
1 x Cabin latch Fox MDM1 4m (pair)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x One touch canopy lock
2 x SUS wire 3m (nylon coated)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x SE Ring 350 mm (2 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x 
1 x SE Ring 400 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Ball link M3 RPA's-UAV's
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Round Rod 1,0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x 1/10 Pilot "Jack"
1 x 160 mm carbon undercarriage (2pcs)
1 x 
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x 120x60 mm C SLH KOVO wheel
1 x Pushrod octagone 4/3 with coupler M3
1 x Split pin 1.6x16 mm (10 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x 2 LiPo XH>EH adapter
1 x BALSA trip 8.0x8.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x X-RAY Micro QR (Rudder)
1 x Battery Protection Circuit Board 22.2v 6s
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x 69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x 110x55 mm C SLH KOVO wheel
1 x DPSI magnetic switch actuator (housing)
1 x Pins M connect Multipin connectors AWG 20-24
1 x 60x25 mm tail wheel "type F3A"
1 x Absorver mount set for 5-10 Kg models
1 x Micro Switch button
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Double conector with JR adapter and 200 mm extension
1 x Cabling for Fox MDM1 wings
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x Snap long M2 (10 uds)
1 x Tip wing protector 28x10x12 (2 pcs)
2 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x 28x5 mm wires output (2 pcs)
1 x Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x Spinner NUT M5
1 x Spinner NUT 1/4x28
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Ball Link Plier
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Digital precision scale up to 2000 g
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Spinner fixed propeller 60 mm / 5,0 mm
2 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Spinner NUT M6
1 x Spinner NUT M5
1 x Spinner NUT M10x1
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Spinner NUT M8x1,25
1 x Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x AC-10 pre-rotacion with motor
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x Hot Glue Stick GREEN
1 x Charger ISDT 608AC 200W
1 x SPS Remote switch actuator
1 x Servo slow down unit (0,7-14,7 sec )
1 x Switching module high voltage SXH
1 x UBEC 6A KAVAN
1 x Head lower part
1 x Baering 3x8x4
1 x SKY RC T400Q Charger 4x100w
1 x 24x12 prop Super Silence
1 x Propeller MASTER 6x3,5
1 x Propeller POWER-PROP 11x6
1 x Chili Race F3K 2 wing servo mounted(carbon biax)
1 x Spinner propeller pleg. 38 mm / 6,0 mm
1 x Spinner propeller pleg. 30 mm / 5,0 mm
1 x Motor A30-12 XL Glider
1 x Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m
1 x Tool for entel
1 x Wheel collar 5 mm Ø (4 uds)
1 x Program Card G2 RAY
1 x 100 mm rods + T patellas set for direction control
1 x LA500 rotor head core
1 x LA500 pilot-seat set
1 x LA500 Autogyro
1 x LA500 front gear holder
1 x LA500 pre-rotation gear hub
1 x 26x12D BIELA 3Bl propeller (3-blades)
1 x 19x8 BIELA propeller
1 x 24x10 BIELA Sport 3Bl propeller (3-blades)
1 x 24x12 BIELA 3Bl propeller (3-blades)
1 x 25x14 4Bl Scale
1 x Propeller MEJLIK 20x13 N-3 Blades
1 x 18x10 BIELA propeller SCALE (3-blades)
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x 9x7 tree blades propeller
1 x Propeller POWER-PROP 14x10
1 x Propeller MASTER AIRSCREW 9x6
1 x 10x7 tree blades propeller
1 x Propeller MASTER 6x3
1 x MASTER 16x10 tree blades propeller
1 x Propeller MASTER AIRSCREW 9x6
1 x Tube mounting clips (5 pcs)
1 x X-RAY Micro QR (Fuselage with canopy)
1 x FA27.2×8.9 Prop-2PCS/PAIR
1 x T-Motor U7-V2.0 Kv420
1 x Actuador lineal HLS12-100210-7.4v
1 x Prop rubber XS set 4 pieces
1 x Spinner propeller pleg. 30 mm / 6,0 mm
1 x Spinner propeller pleg. 38 mm / 5,0 mm
1 x Spinner propeller pleg. 36 mm/6,0 mm/0º
1 x EWC6 40 cm wing connector
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Motor A30-14 L V4
1 x Motor A60-5XS V4 28-pole kv420
1 x A60-6XS V4 28-Pole
1 x Female connector for 12 pines AWG
1 x Motor A60-6XS V4 28-pole kv370
1 x Motor B20-18 L + 4:1 gearbox
1 x Tarjeta programadora RAY G2
1 x Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm
1 x Lightweight aircraft wheel, 55x18.5x3
1 x Super light ∅45x9 mm axi ∅3 mm metalic core wheel
1 x Radial Mount Set for AXI2814 and AXI2820 V2
1 x Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm
1 x FOXY G2 C3530-700
1 x Superlight deluxe wheel 68 mm (2 pcs)
1 x ESC RAY G2 R-60SB SBEC
1 x PU aircraft tyre, 45x16x3 mm
1 x Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2
1 x Lightweight aircraft wheel, 50x18.5x3
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Allen wheel collar M3x5
6,243.58EUR
Manufacturers
Manufacturer Info
Toni Clark
Toni Clark Homepage
Other products
Languages
Español English
Currencies