99.90EUR

Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
[FPV4140-673]


This is a mini all-in-one Sony 4140+673 CCD Board Camera with Built-in 200mw TX and Pre-soldered Circular Polarized antenna.

This CCD board adopts with SONY newest generation image processing technology Enhanced Effio-eSuper. The high horizontal resolution up to 700TVL is performanced as well as unique 2D-DNR technology significantly improve the low-light environment with better image quality. Powerful OSD menu includes Brightness, Contrast, Saturation adjusting functions; Multi-area, White Balance, AGC, and other functions ensure clear bright pictures.

CCD Specifications:
- Model: SONY 4140+673
- DSP+CCD: CXD4140GG+D5148GG+673
- Exposure: Electronic exposure
- Image Sensor: 1/3 Sony 960H CCD Sensor
- Signal System: PAL/NTSC
- Pixels : PAL: 1020H× 596V (610000 pixel) NTSC: 1020H× 508V (520000 pixel)
- Effective Pixels: PAL: 976H× 582V (570000pixel) NTSC: 976H× 494V (480000pixel)
- Definition: 650/700TVL(BW) 650/700TVL(BW)
- Minimum illumination: 0.01Lux/F 1.2
- Video Output: 1.0Vp-p75Ω
- Sync: Internal Synchronization
- Shutter speed: 1/50(1/60) ~1/100, 000(s)
- AGC(automatic gain control): +18dB maximum
- Gain Control: Auto
- DNR (Digital Noise Reduction): 2DNR Support 0~15 16 grade adjustable
- Wide dynamic: Digital wide dynamic 0-60
- OSD: support
- Automatic gain control: 0.25/0.50/0.75/1.00
- Aperture control: yes
- Backlight compensation: HLC / Backlight Compensation
- Backlight compensation: Auto
- SNR: 52dB(minimum) / 60dB(Maximum)(AGC automatic closing)
- Gamma correction: 0.45/1.0
- White Balance: On / OFF switch
- Power: DC12V± 5%
- Ambient temperature: -20 ~ +60
- Size: 25×25

TX Features :
- Frequency: 5.8G wide-band FM video/audio tx
- Transmittion Power: 200mw 23dbi
- 24 Channels
- Sterieo audio: L/R audio channel
- Full format PAL / NTSC.
- PAL CCD default standard , ( NTSC need to customize the CCD 672 )


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Motor DLE 200cc Std
1 x Silent-blocks DLE 170M
1 x Small Crow DLE-170M
2 x Motor DLE 170 M- Paramotors
1 x Motor DLE 430 cc - Paramotors
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Yellow smoke canister 100 g
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Propeller APC 12x8 Glow/Gas
1 x 18x10 BIELA pusher propeller
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x 20x10 BIELA propeller (4-blades) Corsair Scale
1 x Vess propeller 12x7 S
1 x Support Flush MPX Conector (6 pcs)
1 x Blind nut M5 (10 pcs)
1 x Propeller VESS 32A
1 x Conector JR Servo male (50 pcs)
1 x Support Pitot JETI
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Control horn long w/ball
1 x Brass control horn M2 long for wire (10pcs)
1 x Support pump Xicoy X45
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Propeller POWER-PROP 11x6
2 x Propeller POWER-PROP 14x10
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Support ECU Xicoy X-45
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Propeller MASTER 6x3,5
1 x Propeller MASTER 7x4
1 x Ball link M2,5 (10 pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Conector JAPAN G2 Set 5 pares
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Conector JR Servo male (10 pcs)
1 x Conector XT-30 (macho)
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Propeller POWER-PROP 15x10
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Vess propeller 13x6 S
1 x 1,5x50 mm allen screwdriver
1 x Blind nut M5 (4 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Adjustable launching hook
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Propeller MASTER 7x3
1 x FALCON 29X9 CARBON PROPELLER (GAS)
1 x Black silicone 1,0 qmm wire (50 m)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Balsa panel 10x100x1000 mm
1 x Release wax 250ml
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Spannlack 1000 ml
1 x 50m servo "Premium" wire (white/red/blue)
1 x SE Ring 360 mm (2 pcs)
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Couple M4 for wire (10 pcs)
1 x Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x Adapter 3,0 mm M8
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x 2,3 mm Prop Adapter M5
1 x Locking cable tie 4.6x203 (uds)
1 x Adapter 4,0 mm M6
1 x PIX Hawk with accesories
1 x Tube Pitot to PIXHAWK
1 x Servoarm Aluminium SH-82
1 x Servo HITEC HS-225 MG
1 x SAVOX SH 0254 servo
1 x Metal gear set for HS81MG/5082MG
1 x Servo arms set HS-60/81/85/5082MG/5085mg
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x Servo HITEC HS-45 HB, servo box
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x Servo SAVOX SA-1256 TG
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x Servo HITEC HS-225 BB
1 x Servoarm SH-81, two sides, aluminium
1 x Servo SAVOX SH 0257 MG
1 x Soporte servo KST X10 mini / DS135MG
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Servo HITEC HS-5087 MH
1 x Savox Brushless Servo SC-1267 SG
1 x Piñones SAVOX SH-0350
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo SAVOX SB-2290 SG
1 x Servo JETI DSHV 3D13T (13 Kg)
1 x Motor DLE 200cc Premium Muffler
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Savox Brushless Servo SB-2271SG
1 x 25 mm carbon servo arm
1 x Servo HITEC D145 SW
1 x Servo HITEC HS-5475 HB Digi
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Servo HITEC D-955 TW Titanium
1 x Servo HS-5565MH High Voltage
1 x Servo SAVOX SV-1261 MG
1 x Servo SAVOX SV-1270 TG
1 x Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x Blade holder center
1 x Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x Battery LiPo GENS 5500 mAh 6S 22.2v 45C (Gens Ace)
1 x Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x Nut M2 securing
1 x Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace)
1 x Head core
1 x Servo Fork
1 x Autogyro Cierva C30 Spain
1 x Head runner
1 x Blade holder lower
1 x Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace)
1 x Raer wall
1 x Blade holder upper
1 x Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace)
1 x Rotorshape Autogyro
1 x Digital precision scale up to 2000 g
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x Ball Link Plier
1 x Helice CLASSIC-Prop 20x10
1 x Nylon Screw M4x20
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors MPX black female
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Towing hook <3m
1 x Connectors DEANS (T)
1 x Soporte carbono MR30 (2 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x Crystal Universal TX 35.140 Ch 74
1 x Micro Crystal RX 35.120 Ch 72
1 x Pin hinge 39x20 mm (10 uds)
1 x 25 mm reinforced hinge
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 18 mm reinforced hinge
1 x 15 mm reinforced hinge
1 x Large flex hinge (12 uds)
1 x Propeller MASTER AIRSCREW 13x6
1 x SERVO HOLDER
1 x Dremel 3000 130W
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x Quicklock washer 1 mm (10 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Screw M2.5x10 (10 pcs)
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Propeller POWER-PROP 16x8
1 x MASTER 16x10 tree blades propeller
1 x Dean-T Plug Mold
1 x Propeller POWER-PROP 15x8
1 x Copier 2x20 cm pcs
1 x Screw M2x8 (10 pcs)
1 x Propeller MASTER 6x4
1 x 55% silver electrodes (2 pcs)
1 x Aluminum Bayonet / strongal D35 mm / 1 m
20,257.71EUR
Manufacturers
Languages
Español English
Currencies