Top » Catalog » Hardware » Cameras » FPV4140-673

99.90EUR

Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
[FPV4140-673]


This is a mini all-in-one Sony 4140+673 CCD Board Camera with Built-in 200mw TX and Pre-soldered Circular Polarized antenna.

This CCD board adopts with SONY newest generation image processing technology Enhanced Effio-eSuper. The high horizontal resolution up to 700TVL is performanced as well as unique 2D-DNR technology significantly improve the low-light environment with better image quality. Powerful OSD menu includes Brightness, Contrast, Saturation adjusting functions; Multi-area, White Balance, AGC, and other functions ensure clear bright pictures.

CCD Specifications:
- Model: SONY 4140+673
- DSP+CCD: CXD4140GG+D5148GG+673
- Exposure: Electronic exposure
- Image Sensor: 1/3 Sony 960H CCD Sensor
- Signal System: PAL/NTSC
- Pixels : PAL: 1020H× 596V (610000 pixel) NTSC: 1020H× 508V (520000 pixel)
- Effective Pixels: PAL: 976H× 582V (570000pixel) NTSC: 976H× 494V (480000pixel)
- Definition: 650/700TVL(BW) 650/700TVL(BW)
- Minimum illumination: 0.01Lux/F 1.2
- Video Output: 1.0Vp-p75Ω
- Sync: Internal Synchronization
- Shutter speed: 1/50(1/60) ~1/100, 000(s)
- AGC(automatic gain control): +18dB maximum
- Gain Control: Auto
- DNR (Digital Noise Reduction): 2DNR Support 0~15 16 grade adjustable
- Wide dynamic: Digital wide dynamic 0-60
- OSD: support
- Automatic gain control: 0.25/0.50/0.75/1.00
- Aperture control: yes
- Backlight compensation: HLC / Backlight Compensation
- Backlight compensation: Auto
- SNR: 52dB(minimum) / 60dB(Maximum)(AGC automatic closing)
- Gamma correction: 0.45/1.0
- White Balance: On / OFF switch
- Power: DC12V± 5%
- Ambient temperature: -20 ~ +60
- Size: 25×25

TX Features :
- Frequency: 5.8G wide-band FM video/audio tx
- Transmittion Power: 200mw 23dbi
- 24 Channels
- Sterieo audio: L/R audio channel
- Full format PAL / NTSC.
- PAL CCD default standard , ( NTSC need to customize the CCD 672 )


few units
few units

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
    Accesorios
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Turbina XICOY X240 compact
Turbina XICOY X240 compact
3,385.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
2 x Black smoke bombs AX-60 (5 pcs)
1 x 3l Smoke oil
2 x Parachutist
2 x "S" set for boats
1 x Remote electric ignition system
3 x Red smoke bombs AX-60 (5 pcs)
1 x White smoke canister 140 g
1 x Green smoke canister 140 g
1 x Red smoke canister 100 g
1 x Initior Transmitter FTX2 Wireless
1 x "M" set
1 x Green smoke canister 65 g
1 x Blue smoke canister 100 g
1 x Red smoke canister 140 g
2 x AX-60 starters (5 pcs)
1 x AX-60 starters (5 pcs)
1 x Red smoke canister 65 g
1 x "S" set for planes
1 x Parachute expulsion foam
1 x White smoke canister 100 g
1 x Initior Receiver FRX2 Wireless
1 x White smoke bombs AX-18 (5 pcs)
2 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Locking cable tie 3.2x142 (uds)
1 x SUS wire 3m (nylon coated)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Screw-lock connector Ø 2 mm (2 uds)
2 x Steering arm 16 mm Ø 4 mm
2 x Covered closure or fairings
1 x Cockpit plastic closing
2 x Locking cable tie 2.5x100 (uds)
3 x Steering arm 12 mm Ø 4 mm (2 uds)
2 x One touch canopy lock
1 x Locking cable tie 4.6x203 (uds)
1 x Cabin latch Fox MDM1 4m (pair)
2 x Steering arm 12 mm Ø 3 mm (2 uds)
2 x L cockpit anchor "tipe F3A" (2 pcs)
2 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Cap closure 33/23.5mm (2 uds)
3 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Screw-lock connector M2 (2 uds)
2 x Canopy Latch
3 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
3 x Paramotor BackPack XXS 2
1 x Trike XL motor set (motor+esc+prop)
3 x Ballast 700gr OPALE
1 x Para-RC "RC-Evo-Cross" Rescue
2 x Wing OXY 0,5 pulgadas2
2 x Windsock Ozone L -1200 mm
1 x Parachute BACKUP X100
1 x Towing hook
1 x Copier 2x20 cm pcs
1 x 2,0x50 mm allen screwdriver
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Screwdriver for Torx® TX8
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Crimping tool
1 x 1,5x50 mm allen screwdriver
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Digital scale up to 40 kg
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Screwdriver for Torx® TX6
1 x 
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Hot Glue Stick GREEN
1 x Starter EM Gear Power 80
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Hot Glue Stick RED
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Starter EM Gear Power 250
1 x Crimping tool
1 x 
1 x Gold antispark 4 mm plug
1 x Ventral support for AX-18/AX-60
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Foil for sticking flaps and ailerons
1 x SE Ring 480 mm (2 pcs)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Horn for flap control (1 pcs)
1 x Electric rocket starters (6 pcs)
1 x Snap pin for micro clevis (10 uds)
4 x Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x Tip wing protector 40x14 (2 pcs)
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Snap short M2 (10 uds)
1 x Pushrod octagone 3/2
1 x 41x5,5 mm wires output (2 pcs)
2 x Aluminium alloy coupler for carbon tube 6/M4
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x 90 mm rods + T patellas set for direction control
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x 100 mm rods set for direction control
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Yellow smoke bombs AX-60 (5 pcs)
2 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x 38x4,5 mm wires output (2 pcs)
2 x Wing tips support for AX-18/AX-60 (2 pcs)
2 x Cierre cabina aluminio Ø4, I=10 mm
2 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Parachute P4
1 x Paramotor BackPack XXS (without accessories)
1 x Paramotor Trike XL
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x 3 mm Prop Adapter M6
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Fiberglass plate 350x150x0.3 mm
2 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Stainless steel cable Ø 0.5 mm (10 m)
2 x Steering arm 16 mm Ø 3 mm
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x USB Mini Camera endoscope
1 x 
3 x Cotton Flocks, bag/ 7 Kg
1 x resin-hardener L-385 H-385 (5000 g)
1 x Thixotropic agent tin/ 15 g (approx. 350ml)
1 x White gelcoat 1 Kg
1 x Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x 30 cm MULTIPLEX female connector
1 x Protector Connector Dean-T (1 pair)
1 x MPX PCB "Gender-Changer (5 pcs)
2 x Conector XT-150 6mm (Set: 5 pares)
1 x MPX PCB "4 Pins", 5 pieces
1 x Kontronik connector (10 connectors, 5 pairs)
1 x Conector MT-60 (pair)
1 x Red 4 mm connector holder
1 x Mounting frame MPX male connector
1 x Light System
1 x BOEING 727, Retract set for Boeing 727
2 x 50N turbine start protection tube
1 x resin-hardener L-385 H-385 (625 g)
1 x PVC grid diagonal 290x185x0.32 mm
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x 5 mm Prop Adapter M8
1 x EC-Cutter
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x Chopped glass fibre strands 3 mm
1 x Vacuum pump 12 CFM
1 x 4 mm Prop Adapter M8
1 x 4 mm Prop Adapter M6
1 x 3,2 mm Prop Adapter M6
1 x PVC grid straight 290x185x0.32 mm
1 x Steel brush wheel with 2.35mm
1 x 3.2 mm Prop Adapter M6
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Fiberglass plate 620x540x3,2 mm
1 x Wheel collar 4 mm Ø (4 uds)
1 x Tip wing protector 30x10 (2 pcs)
1 x White smoke bombs AX-3 (10 pcs)
1 x Me-163
1 x White smoke bombs AX-60 (5 pcs)
1 x Wing bolts M6 Steel screw Blue (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Triple rod con. 2mm Pushrod (2 pcs)
1 x Window mounting channel 5m
1 x Steering arm 12 mm Ø 4 mm
1 x Wheel collar 2 mm Ø (4 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x Wheel collar 6 mm Ø (4 uds)
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Wheel collar 3.5 mm Ø (4 uds)
1 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
2 x Parachute PV6 for F3J
1 x Spinner NUT 1/4x28
1 x Spinner NUT M8x1,25
1 x Spinner NUT M5
1 x 89 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x Spinner INOVA 102 mm Black
1 x 51 mm INO spinner (carbon imitation)
1 x 102 mm INO spinner (carbon imitation)
1 x 57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Nut for 515/518/519 spinner special for Hacker
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x Spinner 82mm Black ventilado
1 x Cotton Flocks, bag/ 500 g
1 x Conector JR Servo female (10 pcs)
1 x Connectors MPX black female
1 x Conector Servo female 4 pines
1 x Tachometer HANGAR 9 digital
1 x Rescue 1,8m2 / BackPack
1 x MAX pilot ARTF
1 x Aramid 50 daN 50 m
1 x Wing OXY 5,0 m2
1 x Glider Ka 7 Red (2540mm)
1 x LED wire (green - 2pcs)
1 x Conector JR Servo male (10 pcs)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Connectors MPX black male
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Conector FUTABA Servo female (10 pcs)
10,723.13EUR
Manufacturers
Notifications
NotificationsNotify me of updates to Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce