Top » Catalog » Hardware » Cameras » FPV4140-673

99.90EUR

Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
[FPV4140-673]


This is a mini all-in-one Sony 4140+673 CCD Board Camera with Built-in 200mw TX and Pre-soldered Circular Polarized antenna.

This CCD board adopts with SONY newest generation image processing technology Enhanced Effio-eSuper. The high horizontal resolution up to 700TVL is performanced as well as unique 2D-DNR technology significantly improve the low-light environment with better image quality. Powerful OSD menu includes Brightness, Contrast, Saturation adjusting functions; Multi-area, White Balance, AGC, and other functions ensure clear bright pictures.

CCD Specifications:
- Model: SONY 4140+673
- DSP+CCD: CXD4140GG+D5148GG+673
- Exposure: Electronic exposure
- Image Sensor: 1/3 Sony 960H CCD Sensor
- Signal System: PAL/NTSC
- Pixels : PAL: 1020H× 596V (610000 pixel) NTSC: 1020H× 508V (520000 pixel)
- Effective Pixels: PAL: 976H× 582V (570000pixel) NTSC: 976H× 494V (480000pixel)
- Definition: 650/700TVL(BW) 650/700TVL(BW)
- Minimum illumination: 0.01Lux/F 1.2
- Video Output: 1.0Vp-p75Ω
- Sync: Internal Synchronization
- Shutter speed: 1/50(1/60) ~1/100, 000(s)
- AGC(automatic gain control): +18dB maximum
- Gain Control: Auto
- DNR (Digital Noise Reduction): 2DNR Support 0~15 16 grade adjustable
- Wide dynamic: Digital wide dynamic 0-60
- OSD: support
- Automatic gain control: 0.25/0.50/0.75/1.00
- Aperture control: yes
- Backlight compensation: HLC / Backlight Compensation
- Backlight compensation: Auto
- SNR: 52dB(minimum) / 60dB(Maximum)(AGC automatic closing)
- Gamma correction: 0.45/1.0
- White Balance: On / OFF switch
- Power: DC12V± 5%
- Ambient temperature: -20 ~ +60
- Size: 25×25

TX Features :
- Frequency: 5.8G wide-band FM video/audio tx
- Transmittion Power: 200mw 23dbi
- 24 Channels
- Sterieo audio: L/R audio channel
- Full format PAL / NTSC.
- PAL CCD default standard , ( NTSC need to customize the CCD 672 )


few units
few units

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
    Accesorios
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
ProgBox PRO LCD Hobbywing
ProgBox PRO LCD Hobbywing
44.90EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x PT 21x13 EL Propeller
2 x LH long aluminium horn L31xH30 (2pcs)
2 x Horn 20x28,5 mm (2 pcs)
2 x Small aluminium horn gold (2pcs)
2 x Horn with ball 40x30
2 x Motor DLE 200cc Std
1 x Small aluminium horn blue (2pcs)
1 x Horn 5/15 with M2 Bearing
1 x Horn with ball 55x40
1 x Horn 6/35 with M3 Bearing
1 x Horn 13,5x16 mm (2 pcs)
1 x Brass control horn M2 short for wire (2 pcs)
2 x Small aluminium horn red (2pcs)
1 x Horn 5/20 with M2 Bearing
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x RH long aluminium horn (2pcs)
3 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Motor DLE 430 cc - Paramotors
2 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Horn 6/27 with M3 Bearing
1 x Brass control horn M4 short for wire (4 pcs)
2 x Brass control horn M3 short for wire (2 pcs)
3 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x Cable control set
2 x 6 mm blue aluminium threaded horn with patella
2 x 20 mm carbon horn
1 x 6 mm red aluminium threaded horn with patella
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
2 x Motor DLE 170 M- Paramotors
2 x SlowFlyer control horn (3 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
3 x Spring lock washer 3.1 mm (20 pcs)
2 x Flat washer 2.7 mm (20 uds)pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Towing hook
1 x LOWER TOW HOOK
1 x Foil for sticking flaps and ailerons
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Connectors DEANS (T)
1 x BALSA leading edge 8x10x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x Long adjustable aluminium control horn with bearing 2,8x15
1 x Long adjustable control horn with bearing
1 x Support pumb/filter Xicoy X45
1 x Tube support Ø 6mm (10 pcs)
1 x Propeller POWER-PROP 7x7
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Support ECU Xicoy X-45
1 x Support pump Xicoy X45
1 x Long extra-strong control horn with bearing 2,8x34
2 x Rudder forward 90x28 "type Kato"
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x 6 mm M3 variable horn
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Horn DU-BRO 1/2 (2 pcs)
1 x 6 mm aluminium horn with patella
1 x Rudder forward 70x28 "type Kato"
1 x 5 mm M2 variable inclined horn
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Cable with accesories
1 x Nylon Screw M5x30
1 x Threaded insert M4 (4 pcs)
1 x Screw M4x12 (10 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Screw M4x20 (10 pcs)
1 x Control horn long w/ball
1 x Long adjustable control horn 3x34
1 x Tapping Screw M2.9x9.5 (10 pcs)
1 x Tapping Screw M2.2x13 (10 pcs)
2 x Threaded insert M3 (4 pcs)
1 x Micro control horn (2 pcs)
1 x Tornillo cabeza boton M4x12 mm (5 pcs)
1 x Treaded hexagonal socket insert M4 Br (4 pcs)
1 x Nylon Screw M4x20
2 x Big Crow DLE-170M
1 x Screw M3x5 (10 pcs)
1 x Screw M3x16 (10 pcs)
1 x Tapping Screw M2.2x9.5 (10 pcs)
2 x Silent-blocks DLE 170M
1 x Short adjustable control horn 3x24
1 x Horn 16,5x20 mm (2 pcs)
1 x Socket Head Screw M2x10
2 x Screw M2x6 (10 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x Brass control horn M4 short for wire (10pcs)
1 x 800TVL CMOS camera for FPV
1 x USB Mini Camera endoscope
1 x Horn 6/20 with M3 Bearing
1 x Small adjustable control horn with bearing
1 x Servo HITEC HS-5475 HB Digi
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Horn for flap control (1 pcs)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Long adjustable aluminium control horn 2,8x24
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x Servo HITEC D954 TW
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Servo HITEC HS-5085 MG Digi
1 x HITEC DPC-11 programmer
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Servo HITEC D-955 TW Titanium
1 x Servo HITEC D941 TW
1 x Servo HITEC D145 SW
1 x Servo HITEC D131 MW nano
1 x Servo HITEC D951 TW
1 x Servo HITEC HS-125 MG
1 x Servo HITEC HS-5087 MH
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Servo Digital HITEC HS-5065 MG
1 x Receptor MINIMA 6S HITEC
1 x Servo HITEC HS-485 HB
1 x Servo HS-5070 MH Hi Volt
1 x Servo HITEC D85 MG
1 x Motor DLE 200cc Premium Muffler
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Horn 5/10 with M2 Bearing
1 x 5 mm M2 variable horn
1 x Rudder forward 80x28 "type Kato"
1 x Short extra-strong control horn with bearing 2,8x15
1 x 6 mm M3 variable inclined horn
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x Lock nut M4 (10 pcs)
1 x Lock nut M2.5 (10 pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Servo M2x7/16 screw (4 pcs)
1 x Blind nut M5 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Lock nut M2 (10 pcs)
1 x Floating M3 washer pad (36 pcs)
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x Lock nut M2 (20 pcs)
1 x Hexagonal Nut M3 (10 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Lock nut M5 (20 pcs)
1 x Hexagonal Nut M1 (10 pcs)
1 x Nut for mounting M6 (4 pcs)
1 x Hexagonal Nut M4 (10 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Blind nut M3 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Blind nut M4 (4 pcs)
18,801.18EUR
Manufacturers
Notifications
NotificationsNotify me of updates to Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce