1 x | XH female balance (5S) connector (2 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Conector Servo female 4 pines |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | 1/12 Pilot "Cougar" |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | 1/6 Pilot "John" |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Universal Colour Paste white 50 g |
2 x | Foaming agent for epoxy resins 200 g |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Epoxy 5min KAVAN 2x 100g |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Screws flush mount M2 |
1 x | Oracover Yellow CADMIO 10 m |
1 x | Nut M1,6 |
1 x | Battery plate |
1 x | Side Plate |
1 x | Head core bushing |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Rotorhead pushrod |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Rotorshape Elevator |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Cable Cargador FUTABA |
1 x | 2,0x50 mm allen screwdriver |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | Horn 5/10 with M2 Bearing |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Dust collector for mould cleaning |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Starter Sullivan-STAR 601 |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Hysol Mixing Caps SET with 10 |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Adapter lead MPX/EC3 |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Vacuum pump 12 CFM |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Premium servo extension 25cm |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Paint gun for sprays |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Release wax 250ml |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Conector BEC male (10 pcs) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Ball joint long |
1 x | Wheel keeper washer |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Head runner |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Foil for sticking flaps and ailerons |
1 x | Blades 330mm |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Copier 5x20 cm pcs |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Ball Link Plier |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Starter EM Gear Power 80 |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 5/15 with M2 Bearing |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Screwdriver for Torx® TX6 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | 800TVL CMOS camera for FPV |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Parachute expulsion foam |
1 x | Remote electric ignition system |
1 x | Field folding model stand |
1 x | Propeller balancer |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Extension lead 15 cm Multiplex |
1 x | Green smoke canister 140 g |
1 x | 3 blades set |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Piloto jet 130 mm |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Painting GHT Lexan Black 150 ml |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Pilot "Goose" (Slimline) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | 1/6 Pilot "Cindy" |
1 x | Connector CAN 15 |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | 1/7 Pilot "Japanese" |
2 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Piloto JET 1:3,5 |
1 x | 1/6 Pilot "Tony" |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Spannlack 1000 ml |
1 x | Hobbylite Filler, Balsa colour |
1 x | Digital scale up to 40 kg |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Washer 2.2×4 |
1 x | Baering 3x8x4 |
1 x | Oracover White 2 m |
1 x | Tail boom |
1 x | Oracover Orange 2 m |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Ply-Span 450x600/13g White |
1 x | Raer wall |
1 x | Nut M2 securing |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Bearing housing |
1 x | Ply-Span 450x600/13g Orange |
1 x | Side rudder |
1 x | Oracover light Grey 2m |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Oracover Black 2 m |
1 x | Head core |
1 x | Spikes Band (5 m) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Blade holder center |
1 x | |
1 x | Rotor Mast |
1 x | Bearing 3x6x2,5 |
1 x | ORACOVER Fluor red (2 m) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Screw M3x16 |
1 x | Ring 320 mm length (5 pcs) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Oracover Red 2 m |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Oracover ROYAL RED 2m |
1 x | Tape GFK 38 mm |
1 x | Steering lever |
1 x | Oracover Yellow CUB 10 m |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Ply-Span 450x600/13g Blue |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Oracover Yellow CUB 2 m |
1 x | Oratex Natural White 2m |
1 x | Oratex Natural White 20m |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Servo Fork |
1 x | Screws M1,6x6 Allen |
1 x | Oratex Red Fokker 10 m |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Oracover Azul Cielo 2 m |
1 x | Blade holder upper |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Tape GFK 50 mm |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Tail support (2 pcs) |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Small aluminium horn gold (2pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | PPM Encoder Module |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 3,0x60 mm allen screwdriver |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | MPX-Dean "T" Adapter |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Ferrita con funda |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Epoxy 30 min. 200g |
1 x | Stickers-digit for marking |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Covered closure or fairings |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Ferrita 14x8x5.5 mm |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | Z Bender - S Type Tool |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | 30 cm BEC cable (male) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | 3 LiPo XH>EH adapter |
1 x | Mould Resin P 10 kg |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Small aluminium horn red (2pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Circlick securite |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | CC 01 |
1 x | Screwdriver for Torx® TX8 |
1 x | TrainerCord (master-learner) |
1 x | Hot Glue Stick RED |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | PIX Hawk with accesories |
1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | CC 02 |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | |
1 x | Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1 |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | 2 LiPo XH>EH adapter |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | CC 03 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Cockpit plastic closing |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Crimping tool |
1 x | 6 mm aluminium horn with patella |
1 x | Battery charging cable XT60 |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Horn 6/27 with M3 Bearing |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | FOAM - CURE™ (24g) |
1 x | Extension 90 cm (Futaba) |
1 x | Angle of incidence meter |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Green smoke canister 100 g |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Premium servo extension 50cm |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Circlick securite |
1 x | Extension 100 cm (Futaba) |
1 x | Yellow smoke canister 140 g |
1 x | DYNAMOMETER S-1580 |
1 x | Pegamento Pu R 50g polyuretano |
1 x | White smoke canister 65 g |
1 x | Futaba Female 40 cm extension |
1 x | Xplorer3 anemometro |
1 x | Yellow smoke canister 65 g |
1 x | UHU hart 35 g |
|
14,901.72EUR |