Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAVAGE Max Red 1080 mm
129.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	CC 02
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	CC 03
1 x	MPX-Dean "T" Adapter
2 x	CC 01
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Adapter lead MPX/XT60
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	CM-3
2 x	BEC 3A FOXY
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Tape GFK 38 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 360 mm (2 pcs)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	SE Ring 240 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Propeller POWER-PROP 14x9 Izda
1 x	DUPLEX 2.4EX Central Box 210
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Propeller POWER-PROP 14x9
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
2 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	GameCommander USB Universal
1 x	SIMtransmitter 6 Mode 2
1 x	Lock washer 2.2 mm (20 pcs)
2 x	Flat washer 3.2 mm (20 pcs)
2 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
2 x	EasyFLY Addon
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	M3 black washers (4 pcs)
2 x	RF9 Flight Simulator with Spektrum Controller
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Ferrita con funda
2 x	ABS Strip 1.5x3.0x1000 mm
2 x	Strip 1,5x1,5x330 mm
1 x	Ferrita 27x14x7 mm
3 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Short Switch On/Off micro
1 x	Male connector for 10 pines AWG
1 x	5 LiPo XH>EH adapter
1 x	2 LiPo XH>EH adapter
1 x	4 LiPo XH>EH adapter
1 x	CC 05
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	SPARK Switch 5.9v
1 x	3 LiPo XH>EH adapter
1 x	Slave-cable USB Easy Sim
1 x	Spare Part Frame Set for EACHINE RACER 250
1 x	Propadapter for motor A50
1 x	Futaba male 40 cm extension
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension 7.5 cm
1 x	Motor Mega AC 16/15/05 CE F5J
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
2 x	FesEx-Uni8 System
1 x	AXI 2820/12 V2 Long
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	AXI 2212/12 V2
1 x	Fan for A60
1 x	Motor Mega AC 16/20/02
2 x	Mobile Terminal
1 x	SE Ring 480 mm (2 pcs)
1 x	AXI 4120/14 V2
1 x	Screwdriver for Hexagon 1,27mm
1 x	Tape GFK 50 mm
1 x	Ring 320 mm length (5 pcs)
1 x	QUANTUM II 55 Brushless Motor
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
2 x	SE Ring 200 mm (2 pcs)
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Circlick securite
1 x	Cabel "Y" 30 cm (graupner)
1 x	Futaba Female 40 cm extension
1 x	200 mm extensión servo HITEC/JR
1 x	Motor Mega AC 16/15/03
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Screwdriver for Torx® TX8
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	AXI 2217/20 V2 Long "F5J"
1 x
1 x	SE Ring 330 mm (4 pcs)
2 x	20x200 mm battery rings
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Axle for motor A30-XL V2
1 x	Motor Mega AC 16/25/01E 3.17mm
1 x	Motor Mega AC 16/25/02
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Motor Mega AC 16/10/03 RACE
1 x	120x60 mm SLH KOVO wheel
1 x	Axle for motor A20-S (3 uds)
1 x	Tape GFK 25 mm
1 x	Backmountset complete A40
1 x	AXI 2217/12 V2
1 x	AXI 2808/20 V2 Long
1 x	AXI 2212/20 V2
1 x	Motor Mega AC 16/30/01
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Screw M3x16 (10 pcs)
1 x	Floating M3 washer pad (36 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Socket Head Screw M2x5
1 x	Screw M4x30 (10 pcs)
1 x	POWERBOX Magic Jeti Switch
1 x	PowerBox iGyro 3xtra
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Round Rod 6,0x1000 mm
2 x	ABS I Strip 20x10x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Screws 2,2 x 6,5 mm (20 pcs)
1 x	Ferrita 17x10x6.5 mm
1 x	Round Rod 2,5x1000 mm
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	ABS Strip 1.0x2.0x1000 mm

4,885.09EUR