Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock
Servo Mount M (blue) temporarily out of stock	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Adapter lead MPX/XT60
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	CM-3
1 x	Adapter lead MPX/EC3
1 x	Circlick securite
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Pine wood slat 10x10x1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	BALSA leading edge 8x10x1000 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Cabel charger transmitter GRAUPNER
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	CC 05
1 x	BALSA triangular 6x6x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	BALSA triangular 15x15x1000 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
2 x	CC 03
1 x	Beech dowels 10 mm x 1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
2 x	3 LiPo XH>EH adapter
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	USB HLS prog. interface
1 x	Dean "T" - Futaba Adapter
2 x	JETImodel SINGLE BEC
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
1 x	TrainerCord (master-learner)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Beech dowels 4.0 x 1000 mm
1 x	BEC 3A FOXY
1 x	CC 02
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x
2 x	SE Ring 450 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Spikes Band (5 m)
2 x	SE Ring 480 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 240 mm (2 pcs)
1 x	Tape GFK 50 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	20x200 mm battery rings
1 x	Xplorer2 anemometro
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Vacuum bag, 1200 mm x 50 m
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	ABS angle 3,0x3,0x1000 mm
2 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	ABS "T" angle 8.0x8.0x1000 mm
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	U Profile ABS 3,0x6,0x1000 mm
2 x	T-Connector 4.0 mm x 1000 mm
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	Profile ABS Square 3 x 1000 mm
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	25 mm reinforced hinge
1 x	ABS tube 18.0x16.0x1000 mm
1 x	12V Car Adapter
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	DPSI Ampere battery backer
1 x	JETImodel Addcap 1640
1 x	BALSA trip 10x10x1000 mm
1 x	Cabling for Fox MDM1 wings
1 x	SBEC 30 D
2 x	BALSA trip 5.0x5.0x1000 mm
3 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Extension 5 lipos JST - JST/C
1 x	MAX BEC
1 x	UBEC 6A KAVAN
1 x	Long Switch On/Off micro
1 x	Interruptor RX/Batterie
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
2 x	Xplorer3 anemometro
1 x	Xplorer4 anemometro
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 360 mm (2 pcs)
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Profile ABS half cane 4x1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	1/12 Pilot "Tom"
1 x	1/6 Pilot "John"
2 x	1/10 Pilot "Jimmy"
2 x	1/12 Pilot "Langley"
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Carbon plate 350x150x0.5 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	ABS angle 2,0x2,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Fiberglass 280 g/m² 5000x1000 mm
2 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon plate 350x150x1.0 mm
2 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Chopped glass fibre strands 3 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Glass fibre sleeve Ø 20 mm
1 x	Chopped glass fibre strands 3 mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 170 M- Paramotors
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Dummy motor GPW Wasp Scale 1/4
1 x	25 mm Sandpaper file
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Foam plastic plates (310x210x2 mm)
2 x	ABS 500 x 400 x 1 mm (white)
2 x	Carbon plate 350x150x4.0 mm
1 x	Chopped glass fibre strands 0.2 mm
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x	110x55 mm SLH KOVO wheel
2 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	Blade holder lower
1 x	4 mm Prop Adapter M6
3 x	3 mm Prop Adapter M6
1 x	Screw M3x16
2 x	Cierva C30 Body Spain
2 x	Head upper part
1 x	Screws M1,6x6 Allen
1 x	4 LiPo XH>EH adapter
1 x	Rotorshape Autogyro
1 x	5 LiPo XH>EH adapter
2 x	6 mm Prop Adapter M8
1 x	Tirpiz Battleship 1:200
1 x	SCHARNHORST accessories
1 x	Aero-Master Cabine (Aero-naut)
1 x	Dumper propeller 6/8 mm
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	Prop Shaft Adapter 5 mm/M8 "long"
2 x	MG cannon 1.8 cm (5 pcs)
1 x	5 mm Prop Adapter CN-Spinner
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
2 x	6 mm Prop Adapter M8
1 x	3,2 mm Prop Adapter M8
2 x	2 mm Prop Adapter M6
2 x	5 mm Prop Adapter M8
2 x	2,3 mm Prop Adapter M6
2 x	2,3 mm Prop Adapter M6
1 x	3.2 mm Prop Adapter M6
1 x	3.2 mm Prop Adapter M8
1 x	SCHARNHORST Battleship 1:200
1 x	Prop Shaft Adapter 8 mm/M12 "long"
2 x	4 mm Prop Adapter CN-Spinner
1 x	4 mm Prop Adapter M8
1 x	Stick coupler Ms 15 mm
1 x	500 ccm gasoline fuel tank
1 x	FIALA Propeller 20x8
1 x	FIALA Propeller 18x8
1 x	Propeller MEJLIK 28x10
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Propeller MEJLIK 18x8 CFK
1 x	1/12 Pilot "Cougar"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	1/4 Pilot "Heidi"
1 x	1/6 Pilot "Tony"
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Propeller MENZ-S 18x6
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
2 x	Steering lever
1 x	3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x	FIALA Propeller 24x12
1 x	Spare Shaft Ø4mm L:450x23mm M4
1 x	Kardan Black (without pinions)
1 x	G-Ring Ø3mm Ø3xØ6x3 mm
1 x	Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x	Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x	Propeller MEJLIK 24x10 TH
1 x	Helice APC 14x4 W
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Propeller APC 10x4 Glow/Gas
1 x	Propeller APC 12x10 Glow/Gas
1 x	Propeller MEJLIK 16x11 3 Blades
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Piloto JET 1:3,5
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	1/6 Pilot "Garry"
1 x	1/7 Pilot "Japanese"
1 x	Shirt Hispano Aviación
1 x	Softshell Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	RX cabel
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Fiberglass 5000x1100 mm 49 g/m²
1 x	Propeller MENZ-S 15x8
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Propeller MENZ-S 17x6
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	FALCON 24X9 CARBON PROPELLER (GAS)
1 x	Propeller MENZ-S 15x8 3 blades
1 x	Propeller MENZ-S 20x6
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	FALCON 28X10 CARBON PROPELLER (GAS)
2 x	Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm
1 x	Lightweight aircraft wheel, 45x18.5x2
1 x	10 mm Prop Adapter M12
1 x	Propeller MENZ-S 20x8
1 x	3,2 mm Prop Adapter M6
1 x	11x7 tree blades propeller
1 x	Propeller MENZ-S 20x6 Pusher
1 x	Capstan of plastic 88x30x36 mm
1 x	Propeller MENZ-S 15x6
1 x	Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück
1 x	Komet Pump
1 x	Canadair CL-415 (aero-naut)
1 x	Raer wall
1 x	Baering 3x8x4
1 x	Propeller Pleg CAM Carbon 13x6.5
1 x	Propeller Pleg CAM Carbon 10x6
1 x	Blade holder center
1 x	Nut M2
1 x	Propeller Pleg CAM-Prop 8x6
1 x	30 cm BEC cable (female)
1 x	Hacker X-Pro USB interface V2
2 x	Magnetic Interruptor MULTIPLEX
1 x	USB interface ALTIS
1 x	Female connector for 12 pines AWG
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	PowerBox SparkSwitch RS
1 x	Deposito combustible tipo "turbina" 330 ml
1 x	Spinner propeller pleg. 45 mm / 5 mm
1 x	Transom 59x46 mm
1 x	Z Spinner (CN) 32mm
1 x	Doppelpoller 17 mm (6 uds)
1 x	MPS Gas-Cap-Powerswitch
1 x	Cap closure 33/23.5mm (2 uds)
1 x	3,2 mm Prop Adapter M6
1 x	5 mm Prop Adapter M8
1 x	Central piece 52 mm 0º
1 x	Central piece 52 mm - 5º
1 x	75 mm
1 x	BABY glider drawings (Aero-naut)
1 x	Ancla Met. 16 mm (5 pcs)
1 x	Antenna 50 mm (2 uds)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	45x19 mm hard foam KOVO wheel (2 pcs)
1 x	60x25 mm tail wheel "type F3A"
1 x	Foam wheel Ø 351 mm (2 pcs)
1 x	32x9 mm foam standar KOVO wheel (2 pcs)
1 x	Rubber wheel Ø 50mm x 24mm (2pcs) axis Ø 3.1m
1 x	Wheel 18 mm
1 x	Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm
1 x	76 mm light wheels (2 pcs)
1 x	Lightweight aircraft wheel, 50x18.5x3
1 x	PU aircraft tyre, 45x16x3 mm
1 x	100x50 mm SLH KOVO wheel
1 x	Pump 12 V
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Propeller MENZ-S 18x10
1 x	15x7 tree blades propeller LEFT
1 x	3 mm Leader (L 100 mm)
1 x	Program card KAVAN PRO
1 x	Cabestrante 13 x12 mm (5 pcs)
1 x	12 mm portholes (10 pcs)
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	Bearing 3x6x2,5
1 x	Propeller Pleg CAM Carbon 15x10
1 x	GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Spinner propeller pleg. 38 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 5 mm
1 x	Spinner propeller pleg. 38 mm / 6,0 mm
1 x	Central piece 47 mm - 5º
1 x	Prop Shaft Adapter 5 mm "long"
1 x	Spinner propeller pleg. 40 mm / 2,0 mm
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Railing L250 mm (10 pcs)
1 x	Anchor 25 mm (2 uds)

15,729.75EUR