119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Parachute XTRALITE S
1 x 6 mm ball link M3 (10 pcs)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Beech dowels 10 mm x 1000 mm
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Conector BEC male (10 pcs)
1 x Ball link M3 (10 pcs, flat ball)
1 x Horn with ball 40x30
1 x Cable with accesories
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
3 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Cabel charger transmitter GRAUPNER
2 x 2 mm female connector (2 pcs) with safety connector
1 x Pine wood slat 3.0x5.0x1000 mm
1 x VBar NEO VLink 6.x Express, neon-yellow
1 x Ventral support for AX-18/AX-60
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x Sun Cover PC 21 XXL (JMB Jets)
1 x Spinner NUT M6
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x SlowFlyer control horn (3 pcs)
2 x 3 LiPo XH>EH adapter
1 x ABS tube 20.0x18.0x1000 mm
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x Connectors banna oro 2 mm (M/F)
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Soporte filtro FESTO (4 pcs)
1 x BALSA trip 10x10x1000 mm
1 x Socket head ball link M3 (2 uds)
1 x Red smoke bombs AX-60 (5 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
2 x Connectors banna gold 5,5 mm (M/F)
1 x M3 Maxi ball link (2 uds)
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
2 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x Ball link Aluminio M3 (2 pcs)
1 x 3l Smoke oil
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Brass control horn M4 short for wire (4 pcs)
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x Red smoke canister 100 g
1 x Vasa model Catapult
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x CC 02
2 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x wire tensioner (black)
1 x Spinner NUT M4
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Gates hinge
1 x Large flex hinge (12 uds)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Long pinned hinge (6 uds)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x 10 mm gas motor standoff
1 x Propeller MENZ-S 18x8 3-Blades
1 x Micro control horn (2 pcs)
1 x 6 mm M3 variable inclined horn
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Support Flush MPX Conector (6 pcs)
3 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Cable coupler M2 (10 uds)
1 x Pulley brass 8/2 (2 pcs)
1 x Wire easy tensioner (red)
1 x Spinner NUT M5
1 x Tube Pitot to PIXHAWK
1 x Cable coupler M2,5 (2 pcs)
1 x Cable coupler M3 (10 uds)
2 x Pulley brass 5/1,5 (2 pcs)
1 x wire tensioner (red)
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x Spinner Alumin. fixed propeller 30 mm / 3,0 mm
2 x Pulley brass 4/1,5 (2 pcs)
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x "Taxi Tank" Fuel Tank
1 x 22m Fitting barb
1 x 120x60 mm SLH KOVO wheel
1 x 200 mm extensión servo HITEC/JR
1 x 1/6 Pilot "Cindy"
1 x 280 cc gasoline fuel tank complet
1 x wire tensioner (silver)
1 x 102 mm aluminium spinner
1 x Propeller APC 9x6 Glow/Gas
1 x Propeller MENZ-S 20x12
1 x Propeller MENZ-S 16x6 3-Blades
1 x Propeller MENZ-S 19x10
1 x Propeller MENZ-S 19x12
1 x Propeller APC 14x6 Glow/Gas
1 x Propeller MENZ-S 18x6
1 x Propeller MENZ-S 15x12
1 x Propeller MENZ-S 16x10 3-Blades
1 x Propeller MENZ-S 21x8 3-Blades
1 x Connector Sub-D 2+5 Male
1 x APM2.6 Power module with 5.3V DC BEC
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Horn mando long (2 pcs)
2 x Conector FUTABA Servo female (10 pcs)
2 x Pulley brass 2,5/1 (2 pcs)
1 x Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
2 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x Conector JR Servo male (50 pcs)
2 x Connector CAN 15
1 x Connectors banna oro 3,5 mm (M/F)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x BEC 3A FOXY
1 x 4 LiPo XH>EH adapter
1 x Dean "T" - Futaba Adapter
1 x Recessed MPX connector support (6 pcs)
1 x CM-3
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x 30 cm MULTIPLEX female connector
1 x Conector JR Servo female (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Conector BEC female (10 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Antenna holder bracket double
1 x Pulley brass 6/1,5 (2 pcs)
1 x Conector MR-60 (pareja)
1 x Kwik link with arm M3xM2xL24
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Pulley brass 14/2 (2 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Bag connector 2 mm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Conector JR Servo female (10 pcs)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x PPM Encoder Module
1 x Conector JR Servo female (50 pcs)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Conector JR Servo male (10 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x Pulley brass 10/2 (2 pcs)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x PIX Hawk with accesories
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
4,161.15EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies