119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Red smoke canister 140 g
1 x Propeller APC 11x5.5 Electric Pusher
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Propeller APC 11x5 Glow/Gas
1 x Foil for sticking flaps and ailerons
1 x Extension silicon 30 cm male (Graupner)
1 x Extension silicon 25 cm (Graupner)
1 x Extension silicon 75 cm (Futaba)
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x Extension lead 15 cm Multiplex
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Cable control set
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Brass control horn M2 short for wire (2 pcs)
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Brass control horn M2 large for wire (2pcs)
1 x Glases Nimbus "Black"
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x Futaba Female 40 cm extension
1 x 2,0x50 mm allen screwdriver
1 x Digital precision scale up to 2000 g
1 x Brass control horn M4 short for wire (4 pcs)
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Extension silicon 50 cm (Futaba)
1 x Extension silicon 25 cm (Futaba)
1 x Glases Nimbus
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Crimping tool
1 x Horn 6/35 with M3 Bearing
1 x Glases Innovation Plus
1 x Extension 100 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension 30 cm (Futaba)
1 x Propeller balancer
1 x Cable S.BUS 3 salidas 300 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Aluminium wide washer M3 red (4 pcs)
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Propeller POWER-PROP 13x9 Izda
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Round Rod 1,5x1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Socket head ball link M3 (2 uds)
1 x PT 16x10 E Propeller
1 x Propeller POWER-PROP 13x10
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Propeller electric carbon 8.5x7
1 x 1/10 Pilot "Jimmy"
1 x Micro flex hinge (12 uds)
1 x Propeller electric carbon 7x7
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Round Rod 1,25x1000 mm
1 x Dumper propeller 6/8 mm
1 x Propeller electric carbon 10x7
1 x Indoor hinge with servo arm integraded
1 x Propeller electric carbon 9.5x5
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Straightened threaded rod M3 - 1m
1 x 1/6 Pilot "John"
1 x M2,5 Diam metal short ball link V3 (2 pcs)
2 x Ball link M2 (10 pcs)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Propeller APC 10x6 Electric
1 x Propeller APC 12x6 SF
1 x Connectors banna oro 4 mm (M/F)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Conector JR Servo male (10 pcs)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Propeller 11x4,7 SlowFlyer
1 x Propeller APC 11x7 Electric
1 x Conector JR Servo female (50 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
1 x Conector BEC female (10 pcs)
1 x Conector XT-30 (hembra)
1 x Propeller APC 10x6 Electric Pusher
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x 30 cm DEANS female connector
1 x Propeller APC 11x8 Electric
1 x Propeller APC 12x10 Electric
1 x Propeller APC 10x10 Electric
1 x Propeller 3x3
1 x Carbon plate 350x150x3.0 mm
1 x Carbon blade 3D 230 mm
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x T-shape holder metal LAMA
1 x 500 ml sealer (DOPE)
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Parachute PV6 for F3J
1 x Blade holder metal LAMA
1 x Cooler motor type 300
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x Motor mount EDGE 540 48"
1 x Cooler motor type 400
1 x Crystal TX 35.150 Ch 75
1 x Crystal RX 35.120 Ch 72
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Extension silicon 100 cm (Graupner)
1 x Mini-handed clamp
1 x Extension silicon 10 cm (Futaba)
1 x Extension 7.5 cm
1 x Extension silicon 100 cm (Futaba)
1 x Round Rod 2,0x1000 mm
1 x M3 INDUSTRIAL ball link (2 uds)
1,769.36EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies