119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Ventral support for AX-18/AX-60
1 x Green smoke canister 100 g
1 x Red smoke canister 140 g
2 x "M" set
2 x AX-60 starters (5 pcs)
1 x Mixers smoke bombs AX-60 (5 pcs)
2 x Red smoke bombs AX-60 (5 pcs)
2 x Initior Receiver FRX2 Wireless
1 x "S" set for boats
1 x Blue smoke canister 100 g
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x B4-0 rocket charges (6 pcs)
1 x Smoke set "M"
1 x Yellow smoke canister 65 g
1 x White smoke canister 65 g
1 x PCARD Wireless System
1 x Smoke set "S"
2 x Remote electric ignition system
1 x White smoke canister 100 g
2 x Red smoke canister 65 g
1 x White smoke bombs AX-9 (10 pcs)
1 x Fixed launching hook
1 x Extractor piñones 2.3/3.2 mm
1 x Tow hook for tug
1 x Adjustable launching hook
1 x SERVO HOLDER
1 x Servo NARO Max Std
2 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x Hovercraft sailcloth
2 x 
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Motor DLE 200cc Std
1 x Big Crow DLE-170M
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Extension silicon 30 cm male (Graupner)
1 x Extension silicon 35 cm male (Futaba)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Round Rod 2,0x1000 mm
1 x VBar Control Touch, midnight black
1 x Flybar support metal LAMA
1 x Propeller POWER-PROP 7x7
1 x Recessed MPX connector support (6 pcs)
2 x "S" set for planes
1 x Yellow smoke canister 140 g
2 x Red smoke canister 100 g
1 x Carbon plate 350x150x1.0 mm
1 x Double conector with JR adapter and 200 mm extension
1 x Male connector for 6 pines AWG
1 x PWC4 wing/fuselage connector for 4 servos
1 x FX three-position switched channel, long
1 x Short Switch On/Off micro
1 x Female connector for 6 pines AWG
1 x Male connector for 20 pines AWG
2 x Male connector for 16 pines AWG
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x SPARK Switch 12v
2 x EWC3 100 cm wing connector
1 x Motor DLE 200cc Premium Muffler
1 x Micro Switch button
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Fuel bottle 500 ccm
1 x LOGO 600 SX (kit)
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x ARS 300 91" ARF 2311mm ORANGE
1 x Propeller APC 10x5 Electric
1 x Initior Transmitter FTX2 Wireless
1 x Smoke set "Glider"
1 x Propeller APC 10x10 Electric
1 x SLICK 360-B 104" (2640 mm)
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Propeller APC 10x3,8 SF
1 x Propeller APC 11x5.5 Electric
1 x EXTRA NG 85" 2159mm yellow/blue
1 x Propeller APC 11x7 Electric
1 x Propeller APC 11x5.5 Electric Pusher
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Xoar Electric Beechwood Prop 12x6
1 x 3l Smoke oil
1 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x EWC3 40 cm wing connector
1 x Filter Capacitor JR
1 x AXI 2826/10 V2 Long
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Extension 2/3 lipos JST/C
1 x Extension 2/3 lipos JST - JST/C
1 x ED Position Lights wireless (Set of 3)
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x DC-3 Douglas (DAKOTA) 1800 mm
1 x 50 mm servo arm with bearing (2 pcs)
1 x Crystal Universal TX 35.140 Ch 74
1 x Indoor Brushed motor kit
1 x CC 01
1 x Flat washer 1.7 mm (20 pcs)
1 x CM-3
1 x AXI 2212/20 V2
1 x AXI 2814/16 V2
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Copper lacquer wire Ø0,2 mm (5 m)
18,230.08EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies