87.90EUR

Interruptor SPS 70v 60/120A
[EMCA72006-1]


Product description and features
Electronic safety power switch for electric power systems. An anti-flash-circuitry prevents the sparks during connecting the battery.
The SPS SafetyPowerSwitch separates the motor from the battery. The electric motor drive remains inactive and therefore non hazardous until activation.
For 2S up to 16S LiPo batteries (6V to 70V). 60A continuous current and 120A peak current Suitable e. g. for F3A models.
Connection cable
Battery and controller side: 2 AWG11 silicone connection cables each.
SPS switch actuator for switching on and off
For switching on and off the SPS SafetyPowerSwitch an additionally available SPS switch actuator is necessary (see "Accessories" tab). The SPS switch actuator is not included within delivery contents. The following SPS switch actuators are available:
SPS gas cap switch actuator (green LED)
SPS gas cap switch actuator (blue LED)
SPS pin switch actuator
SPS remote switch actuator
Delivery contents
SPS SafetyPowerSwitch 70V 60/120A, and 1 quick reference guide.

Technische Daten
Suitable batteries (LiPo) 2S ... 16S LiPo
Voltage range 6V ... 70V
Current consumption (switched off) max. 0.5mA, typ. 0.25mA
Permanent current 60A
Max. peak current 120A
Power dissipation @ 50A approx. 2.25W
Dimensions 65 x 30 x 9.3mm (2.56 x 1.18 x 0.37in)
Weight 45g (1.59oz)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
3 x Silicone 0,25 qmm servos wire Graupner (100 m)
2 x Protective Cover for wires Ø 6 mm 1000 mm
3 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
2 x 1 m servo "Premium" wire (white/red/blue)
2 x Black silicone 1,0 qmm wire (50 m)
1 x Protective Cover for wires Ø 20 mm 1000 mm
2 x 5 line servos wire black (1 m)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Blue silicone 0,5 qmm wire (50 m)
1 x JR silicone servo wire 0,35 qmm / 5m
1 x PVC 0,08 qmm Graupner servos wire (5 m)
2 x Protective Cover for wires Ø 10 mm 1000 mm
2 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
2 x Cable set PREMIUM, fuselage/wing
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x Protective Cover for wires Ø 6 mm 1000 mm
2 x Cable Cargador FUTABA
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
2 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Red silicone 1,0 qmm wire (50 m)
2 x Green silicone 0,25 qmm wire (50 m)
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x Dean "T" - Futaba Adapter
1 x Cabel charger transmitter GRAUPNER
1 x CC 02
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 4 LiPo XH>EH adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Adapter lead MPX/XT60
2 x 30 cm BEC cable (female)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x 2 LiPo XH>EH adapter
2 x Copper lacquer wire Ø0,2 mm (5 m)
2 x CM-3
2 x 5 LiPo XH>EH adapter
2 x USB HLS prog. interface
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x BEC 3A FOXY
1 x 30 cm BEC cable (male)
2 x CC 01
1 x CC 05
1 x APM2.6 Power module with 5.3V DC BEC
2 x TrainerCord (master-learner)
2 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x CC 03
1 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x JETImodel SINGLE BEC
1 x TP/TopFuel - JST-EH 4/5S Adapter
2 x Cabel "Y" 30 cm (graupner)
2 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Premium servo extension 50cm
4 x Extension silicon 30 cm male (Futaba)
2 x Extension silicon 10 cm (Futaba)
2 x Extension silicon 30 cm female (Graupner)
2 x Circlick securite
1 x Prolongador S-Bus JR/JR 20cm
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension 100 cm (Futaba)
3 x Extension 90 cm (Futaba)
2 x Cabel "Y" 15 cm
3 x Premium servo extension 75cm
1 x Cabel "Y" 30 cm (Futaba)
2 x Futaba Female 40 cm extension
2 x 200 mm extensión servo HITEC/JR
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Conector MR-60 (pareja)
1 x Turbina KINGTECH K320 G5
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
2 x XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
2 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
2 x Ferrita 14x8x5.5 mm
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Starter EM Gear Power 250
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Xplorer1 anemometro
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x RF9 Flight Simulator with Spektrum Controller
1 x Buy Perforated film 100 cm / 20 m
1 x Circlick securite
1 x Cable set PREMIUM , fuselage/wing one4one
1 x SPARK Switch 12v
1 x Support XT60 conector (2 pcs)
3 x wing/fuselage connector for 12 pines AWG 20-24
1 x Support pump Xicoy X45
1 x 
2 x Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x TP/TopFuel - XH 2/3S Adapter
4 x PowerBox SparkSwitch RS
1 x PSC 5
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x 3 LiPo XH>EH adapter
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x A60-6XS V4 28-Pole
1 x Bearings for motors hacker A50
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x White silicone 0,25 qmm wire (150 m)
1 x Esc MasterBasic 40SB
3 x Extension 15 cm (Futaba)
1 x Extension 30 cm (Futaba)
2 x Extension silicon 10 cm (Graupner)
2 x Extension silicon 75 cm (Futaba)
2 x Prolongador S-Bus JR/JR 10cm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Tubo espiral FESTO 6x1 Black
2 x Extension silicon 50 cm (Futaba)
1 x HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
2 x Extension silicon 50 cm (Graupner)
3 x Extension lead 15 cm Multiplex
2 x Extension silicon 35 cm (Futaba)
2 x Sun Cover PC 21 XXL (JMB Jets)
2 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Propeller POWER-PROP 14x9 Izda
1 x Propeller POWER-PROP 14x9
1 x Power supply NT 25 Amp.
1 x Silicone red 4,0 qmm wire (25 m)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x Extension silicon 100 cm (Graupner)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Ferrita 27x14x7 mm
1 x SERVO HOLDER
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
2 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Male Prolonger TP 4/5S
2 x Extension 2/3 lipos JST - JST/C
1 x Female connector for 20 pines AWG
3 x JETImodel DPS 40
1 x Electronic switch JETI SP6 0-15v/6A
1 x Blade holder lower
1 x Complet landing gear
1 x Screws flush mount M2
3 x Multi-adapter balancer JST/C - TP
2 x SPS 70V 100/200 A
2 x Pins M connect Multipin connectors AWG 20-24
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x MAX BEC
1 x Male connector for 16 pines AWG
1 x Cabling for Fox MDM1 wings
1 x PWC4 wing/fuselage connector for 4 servos
2 x SBEC Jeti
2 x MAX BEC 2
1 x Male connector for 20 pines AWG
1 x Switching module high voltage SXH
1 x Electronic switch JETI SP06 Opto
1 x EWC6 40 cm wing connector
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
3 x SPS 70V 140/280 A
1 x JETImodel Addcap 1640
2 x SBEC 40
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
3 x Thixotropic agent tin/ 15 g (approx. 350ml)
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Steering lever
1 x Cierva C30 spanish decoration Stickers
2 x Cierva C30 simulated motor
1 x Blade holder center
2 x Blade holder upper
3 x Balls 4 mm
2 x Head runner
1 x Screw M3x16
1 x Screws M1,6x6 Allen
1 x Fod Guard 83x32 mm
1 x Jet Pipe for ULTIMATUM 2m
1 x Jet Pipe 160N-250N (120/130 mm)
1 x Blades 330mm
1 x Side rudder
1 x Battery plate
1 x Baering 3x8x4
1 x Rudder
1 x Fod Guard 73x32 mm
1 x MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x Rotorshape Elevator
2 x Extension 7.5 cm
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x JETCAT ADITIVO ANTIESTATIC 120ml
1 x Potenciometro micro
1 x Arnes cruzado Confort de Luxe PROFI
1 x USB Charger 12V DC for car
1 x Cable S.BUS 3 salidas 100 mm
1 x Extension silicon 25 cm (Futaba)
1 x Premium servo extension 100cm
1 x Extension PVC 150 cm (Graupner)
1 x Extension silicon 35 cm male (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x AXI 2820/12 V2 Long
1 x Female connector for 10 pines AWG
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Ferrita 17x10x6.5 mm
1 x ESC YGE 120 LVK
1 x A/C quality beech plywood 600x300x0.8 mm
1 x ESC MEZON 115 Opto
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x PYRO 800-40 Long Axi
1 x KIRA 480-38 5,2:1
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x MAMBO 17
1 x Axle for AXI 2814/xx motors
1 x DC24 II Transmitter case insert
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Silicone black 1,0 qmm wire (100 m)
1 x Axle for AXI 5325/xx motors
1 x KONDOR 15-92
1 x Bearing MR63 ZZ for AXI 2203/40 VVP
1 x KIRA 500-26 6,7:1
1 x Silicone red 1,5 qmm wire ( 25 m)
1 x PYRO 800-48 Long Axi
1 x Axle for AXI 5345/xx motors
1 x PYRO 700-45 Long Axi
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x AXI 2826/10 V2
1 x SPARK Switch 7.4v
1 x Connector Sub-D 2+5 Female
1 x Three-position switched channel, short
1 x 50m servo "Premium" wire (white/red/blue)
1 x Axle for AXI 2820/xx motors
1 x Combo AM480 T-Motor 650 Kv
1 x Silicone red 4,0 qmm wire ( 1 m)
1 x FALCON 33X11W CARBON PROPELLER (GAS)
2 x 25x10 BIELA propeller (3-blades) Corsair Scale
2 x 23x10 BIELA propeller
2 x 19x10 BIELA propeller (3-blades)
2 x 18x8 BIELA 3Bl propeller (3-blades)
1 x SBEC 30 D
1 x Extension 6 lipos XH > EH
1 x 26x12 BIELA 3Bl Pusher propeller
1 x 23x10 BIELA propeller (4-blades) Scale
1 x 22x10 BIELA pusher propeller
1 x Nut M2 securing
1 x Double conector with JR adapter and 200 mm extension
1 x MPX-Dean "T" Adapter
1 x Receptor FUTABA R7003SB FASST
1 x Receptor FUTABA R3106GF T-FHSS
1 x FALCON 24X10 CARBON PROPELLER (GAS)
1 x Propeller FALCON 27x10 3-BL carbono-gas
1 x 19x8 BIELA propeller
1 x 22x10 BIELA propeller
1 x Switc electronic 30 Amp
1 x 18x6 BIELA propeller
1 x 18x10 BIELA propeller SCALE (3-blades)
1 x BIELA 19x7 WILGA Propellers
1 x Opto Gas Engine Kill Switch
1 x Extension 2/3 lipos JST/C
1 x 26x8 BIELA propeller
1 x 26x16D BIELA 3Bl propeller (3-blades)
1 x Multi-adapter balancer JST - TP
1 x MPS Gas-Cap-Powerswitch
1 x Selfstart electronic switch
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x 25x14 4Bl Scale
1 x 26x18 BIELA propeller
20,928.60EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies