119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x PIX Hawk with accesories
1 x PPM Encoder Module
1 x Tube Pitot to PIXHAWK
1 x 30 cm BEC cable (female)
2 x BEC 3A FOXY
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x MPX-Dean "T" Adapter
2 x Bec MR UBEC 5A (5v/6v/7v)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x 4 LiPo XH>EH adapter
1 x Dean "T" - Futaba Adapter
1 x Adapter lead MPX/XT60
1 x 3 LiPo XH>EH adapter
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x TP/TopFuel - XH 2/3S Adapter
1 x 5 LiPo XH>EH adapter
1 x CC 02
1 x Copper lacquer wire Ø0,2 mm (5 m)
2 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x TrainerCord (master-learner)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x CM-3
1 x CC 03
1 x 2 LiPo XH>EH adapter
2 x 30 cm BEC cable (male)
1 x Cabel charger transmitter GRAUPNER
2 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x JETImodel SINGLE BEC
2 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Straightened rod Ø 8.0 mm x 1000 mm
2 x Straightened rod Ø 2.5 mm x 1000 mm
2 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Blue smoke canister 100 g
1 x AX-60 starters (5 pcs)
2 x Initior Receiver FRX2 Wireless
1 x Remote electric ignition system
1 x 3l Smoke oil
1 x Yellow smoke canister 140 g
2 x Yellow smoke canister 65 g
1 x "S" set for planes
1 x Locking cable tie 2.5x100 (uds)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Locking cable tie 3.2x142 (uds)
1 x SUS wire 3m (nylon coated)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x Cierre cabina aluminio Ø5, I=16 mm
2 x Cierre cabina aluminio Ø4, I=10 mm
1 x Covered closure or fairings
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x L-Connector 1.5 mm x 1000 mm
1 x ABS angle 5,0x5,0x1000 mm
3 x ABS "T" angle 8.0x8.0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x T-Connector 4.0 mm x 1000 mm
2 x L-Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x 3,0x60 mm allen screwdriver
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Motor DLE 200cc Premium Muffler
1 x 
1 x Trailing edge BALSA 35x8x1000 mm
1 x Set cintas unión paracaídas 145 cm
1 x 1/12 Pilot "Fighter"
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x DPS Switch JR/JR
1 x Cabling for Fox MDM1 wings
1 x CC 01
1 x USB interface ALTIS
1 x Circlick securite
1 x Male Prolonger TP 4/5S
1 x Extension 5 lipos JST - JST/C
1 x USB HLS prog. interface
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x APM2.6 Power module with 5.3V DC BEC
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Spare Part Frame Set for EACHINE RACER 250
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Green smoke canister 100 g
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Red smoke canister 100 g
1 x Clip mini fixing for wing (2 pcs)
1 x Canopy Latch
1 x 250 mm / 16 mm Airbrakes
1 x Cabin latch Fox MDM1 4m (pair)
1 x Electric rocket starters (6 pcs)
1 x Cable grommet Ø 4 mm (4 uds)
1 x Allen wheel collar M4x6
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x B4-0 rocket charges (6 pcs)
1 x Cable grommet Ø 5 mm (4 uds)
1 x 38x4,5 mm wires output (2 pcs)
1 x Cable grommet 9.5 mm (4 uds)
1 x White smoke bombs AX-9 (10 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x Clip fixing for wing (2 pcs)
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Crystal Universal RX 35.040 Ch 64
1 x Profile ABS half cane 5.0x1000 mm
1 x Carbon blade 3D 230 mm
1 x Program 5v SIO RS 232
1 x ABS rectangular profile 10x5.0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Metalic nose for PROJETI
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x SERVO DES 588 BB MG
4,602.09EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies