Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Ferrita con funda
2 x	Ferrita 17x10x6.5 mm
4 x	Ferrita 14x8x5.5 mm
1 x	Servo NARO Max Std
1 x	Ferrita 27x14x7 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Tape GFK 38 mm
2 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 360 mm (2 pcs)
2 x	Foil for sticking flaps and ailerons
2 x	SE Ring 250 mm (2 pcs)
3 x	Ring 320 mm length (5 pcs)
3 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Tape GFK 50 mm
3 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	14x60 mm Mini rings Tie Wraps (4 pcs)
3 x	Cinta Goldfix 1m
3 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 200 mm (2 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
2 x	SE Ring 300 mm (2 pcs)
1 x	Fail Safe air retract
1 x	40 mm air cylinder
2 x	Marker ties (20 pcs)
1 x	120 mm leg for retract undercarriage with rotation sistem (1 pcs
2 x	20x200 mm battery rings
1 x	Quick hose connector 4-4 mm
3 x	Tape GFK 25 mm
1 x	Z-shaped servo mount
1 x	T-Hose connector 6-6-6 mm
1 x	Y-Hose connector 2-2-2 mm
1 x	Quick hose connector 6-6 mm
1 x	Wheel cover holder Ø 4 mm (2 uds)
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
2 x	ABS rectangular profile 10x5.0x1000 mm
2 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
2 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	AX-60 starters (5 pcs)
1 x	Electric rocket starters (6 pcs)
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	White smoke canister 140 g
1 x	Yellow smoke bombs AX-60 (5 pcs)
2 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Skies 2x 335 mm + 1x Esqui 250mm
1 x	Indoor landing gear set
1 x	Wheel cover holder Ø 5 mm (2 uds)
1 x	Body for landing gear Ø 3 mm
2 x	SE Ring 240 mm (2 pcs)
2 x	T-Hose connector 3-3-3 mm
1 x	Y-Hose connector 4mm
1 x	Y-Hose connector 3-3-3 mm
1 x	120x60 mm SLH KOVO wheel
2 x	Profile ABS half cane 4x2.5x1000 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Distanzstück motor OS 120 AX
1 x	Beech dowels 2.0 x 1000 mm
1 x	Crystal Universal RX 35.130 Ch 73
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	Servo GO-09 9g
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Ball bearing 6002 DLE
1 x	Gasket set DLE-30
1 x	Escape DLE-60 Izda
1 x	DLE 111 Carb gasket (V1)
1 x	DLE 55 RA pipe plug
1 x	DLE 111 pipe plug
1 x	Body for landing gear Ø 4 mm
1 x	Racor "Y" 3 mm
1 x	Servo arm with 5 mm hole to FEMA 9810A
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Spikes Band (5 m)
1 x	Propeller Pleg CAM-Prop 8x6
1 x	MZ-10, 5 Channel HoTT
1 x	KIRA 600-24 6,7:1
1 x	Shaft KPG25 4,2:1
1 x	KIRA 600-38 6,7:1
1 x	KIRA 600-20
1 x	Kontronik Kosmik 30 cm Cable Kit
1 x	CA Glue (medium) 20g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	CA Glue fast 20g
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	USB programador GO servos
1 x	Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Servo GO-1053 MG 20.0kg
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Gasket set DLE-120
1 x	Gasket set DLE-55RA
1 x	DLE-111 Crankcase V2 Conversion Kit
1 x	DLE 85/111/120 Crankshaft keyway
1 x	Canister combo DLE 111 cc
1 x	DLE 55 Ignition unit
1 x	Canister combo DLE 120 cc
1 x	Carburetor DLE 170
1 x	DLE 85 Ignition unit
1 x	DLE Ignition 170M
1 x	DLE 85 / DLE111 / DLE120 Prop Washer
1 x	Big Crow DLE-170M
1 x	CILINDER FOR DLE 55RA
1 x	Canister combo DLE 55 cc
1 x	DLE 111 Old Crankshaft keyway
1 x	DLE 55 Muffler
1 x	DLE Ignition 111/120/170

6,935.51EUR