Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » SETOKW

16.00EUR

Opto Gas Engine Kill Switch
[SETOKW]

This kill switch is double Optically Coupled to isolate your ignition system from your radio system (No Interference!!). It also consist an additional safety functions.

Device features
• Includes a remote mountable ultra bright LED to indicate when the ignition is armed or not, or if the safety sequence protection is active.
• The LED diode informs also if Fail-Safe occured during flight (even after landing).
• Safety sequence protection for engine ignition powering up after model preparation.
• Double optically Coupled input/output is Isolated.
• Turning engine ignition ON or OFF directly from RC Transmitter
• No need to use additional mechanical switch for disconnecting ignition battery.
• 8 Bit microcontroller powered directly from RC receiver.
• 3,0 - 24,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input (receiver side).
• 3,0 - 20,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad MOSFET Output (ignition side).
• Possible to use one battery setup (independent two batteries setup by default).
• Max. current output: 5 Amp continous, 16 Amp peak
• Fail-Safe engine kill when interference or signal lose is longer then 1 second. (this function can be turned OFF).
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires 22AWG, universal connectors Futaba/JR.
• Small and light weight – only 15 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spark motor OS nº 3

temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Adapter lead MPX/XT60
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
2 x	Dean "T" - Futaba Adapter
2 x	3 LiPo XH>EH adapter
2 x	ABS angle 1.5x1.5x1000 mm
3 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	4 LiPo XH>EH adapter
1 x	TrainerCord (master-learner)
3 x	30 cm BEC cable (female)
1 x	Profile ABS Square 4 x 1000 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	L-Connector 1.0 mm x 1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
2 x	ABS angle 2,0x2,0x1000 mm
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
2 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	CC 02
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Adapter lead MPX/EC3
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x	Profile ABS half cane 2.0x1000 mm
1 x	USB HLS prog. interface
1 x	U Profile ABS 2,0x4,0x1000 mm
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	CC 01
1 x	JETImodel SINGLE BEC
1 x	Profile ABS Square 2 x 1000 mm
2 x	CC 03
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	Circlick securite
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
2 x	T-Connector 4.0 mm x 1000 mm
2 x	30 cm BEC cable (male)
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
3 x	BEC 3A FOXY
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Cabel charger transmitter GRAUPNER
1 x	ABS "T" angle 2.0x2.0x1000 mm
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	CM-3
2 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	Cross Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Carbon fiber rod 3.0 mm x 1000 mm
2 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
2 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Carbon fiber rod 14 mmx1000 mm
1 x	Motor DLE 200cc Std
2 x	Motor DLE 430 cc - Paramotors
2 x	Big Crow DLE-170M
2 x	Fixed launching hook
1 x	Towing hook
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Softshell Hispano Aviación
2 x	GameCommander USB Universal
1 x	Shirt Hispano Aviación
1 x	Extractor piñones 2.3/3.2 mm
2 x	Interface Realflight Simulator
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	Tape GFK 25 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Paramotor BackPack XXS 2
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Cabling for Fox MDM1 wings
1 x	PSC 6
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
2 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Profile ABS half cane 4x1000 mm
1 x	SPARK Switch 12v
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Dual Sequencer Gear and Canopy
1 x	Angled clevis with threaded rod M3
1 x	Faucet FESTO
1 x	Festo 4mm Tubing Holder (10 uds)
2 x	Quick hose connector 3-3 mm
2 x	Carbon fiber flat 1000x3.0x0.13 mm
2 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Vest clothes Hispano Aviación
1 x	LOWER TOW HOOK
1 x
2 x	EasyFLY Addon
2 x	AXI 2820/14 V2
1 x	AXI 2808/24 V2
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Connector Sub-D 2+5 Female
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
2 x	SPARK Switch 7.4v
1 x	Adapter 5,0 mm M8
1 x	AXI 2820/8 V2
2 x	AXI 2814/20 V2
2 x	AXI 2826/6 V2 Long
1 x	AXI 2212/12 V2
1 x	AXI 4120/14 V2
1 x	Cable video GoPro and 5V cable
1 x	TX 250 mW especial GOPRO
1 x	DPS Switch JR/JR
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
2 x	SPS Remote switch actuator
1 x	5 LiPo XH>EH adapter
1 x	Wheel collar 3 mm Ø (4 uds)
2 x	FX three-position switched channel, long
2 x	Servo slow down unit (0,7-14,7 sec )
3 x	Magnetic Interruptor MULTIPLEX
3 x	MAX BEC 2
2 x	Mudguard for 140/165 mm wheels
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
3 x	Electronic switch JETI SP6 0-15v/6A
1 x	SBEC 30 D
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	DPSI Ampere battery backer
1 x	JETImodel DPS 40
1 x	Male connector for 20 pines AWG
1 x	JETImodel Addcap 1640
1 x	PWC4 wing/fuselage connector for 4 servos
2 x	MPS Gas-Cap-Powerswitch
2 x	SBEC Jeti
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Adapter 4,0 mm M8
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Adapter 3,2 mm M8
1 x	L-shaped servo mount
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Festo Adaptor Tygon Large/4mm
1 x	1000 cc gasoline fuel tank complet
1 x	1/6 Pilot "Cindy"
1 x
2 x	102 mm INO spinner (carbon imitation)
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	20x200 mm battery rings
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	25 mm carbon servo arm
1 x	110x55 mm SLH KOVO wheel
1 x	Nylon gear block Ø 6 mm (2 uds)
1 x	Landing gear axle Ø 5 mm (2 uds)
2 x	Multi-adapter balancer JST - TP
1 x	Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	Wheel FEMA 178 mm / 8 mm
1 x	Wheel FEMA 127 mm / 6 mm
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Conector FESTO G1/8 Quick 4mm 90º
1 x	Y-Hose connector 2-2-2 mm
1 x	Slave-cable USB Easy Sim
1 x	Interface Jack Adapter IKARUS
1 x	SIMtransmitter 6 Mode 2
1 x	Small Crow DLE-170M
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	PT 22x10 EL Propeller
1 x	F-4 Phantom Scale 1:7, Electric retract landing gear
1 x	Electric Landing Gear Trainer Jet Intro
1 x	Electric Landing Gear ASPIRE
1 x	Propeller electric carbon 10.5x8
1 x	Propeller electric carbon 10x8
1 x	Propeller POWER-PROP 16x10
1 x	Propeller electric carbon 9.5x7
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	110x55 mm C SLH KOVO wheel
1 x	160 mm carbon undercarriage (2pcs)
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	1/12 Pilot "Tom"
1 x	280 cc gasoline fuel tank complet
1 x	1/4 Pilot "Heidi"
1 x	1/7 Pilot "Japanese"
1 x	1/6 Pilot "Garry"
1 x	120x60 mm SLH KOVO wheel
1 x	102 mm aluminium spinner
1 x	10 mm gas motor standoff
1 x	1/10 Pilot "Jack"
1 x	"Taxi Tank" Fuel Tank
1 x	1/6 Pilot "Tony"
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	18m Fitting barb
1 x	20 mm carbon horn
1 x	1/12 Pilot "Langley"
1 x	1/4 Pilot "Mike"
1 x	Nylon threaded block M5 (2 uds)
1 x	Motor DLE 200cc Premium Muffler
1 x	Spinner INO 75 mm Chrome (Imitacion metal)
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	F3A carbon 82 mm spinner for 12 mm axis
1 x	42 mm black plastic spinner for fixed propeller
1 x	Tow hook for tug
1 x	PT 21x13 EL Propeller
1 x	F9F COUGAR Red ARF 1.562 mm
1 x	ASPIRE Red ARF 2.000 mm
1 x	Electric Landing Gear GALEB G4
1 x	ASPIRE Red ARF 2.000 mm, Set Elevators
1 x	L-39 Albatros Scale 1:4.75 1991 mm
1 x	F-16 Scale 1:6, Electric retract landing gear
1 x	ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x	1/12 Pilot "Cougar"
1 x	1/6 Pilot "Buddy"
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Propeller POWER-PROP 10x6
1 x	Propeller POWER-PROP 11x6
1 x	Propeller POWER-PROP 12x6
1 x	Ciano KAVAN Thin 20g
1 x	DPSI magnetic switch actuator (housing)
1 x	Extension 2/3 lipos JST/C
1 x	Multi-adapter balancer JST/C - TP
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	AXI 2808/20 V2
1 x	AXI 2826/12 V2
1 x	AXI 2217/20 V2
1 x	AXI 2814/10 V2 Long
1 x	AXI 2217/12 V2
1 x	AXI 2820/8 V2 Long
1 x	MB-339 Aermachi 84" ARF c/retractil electric
1 x	Bags wings/rudder ASPIRE
1 x	Extension 2/3 lipos JST - JST/C
1 x	Long Switch On/Off micro
1 x	Male Prolonger TP 4/5S
1 x	PSC 5
1 x	Extension 5 lipos JST/C
1 x	AXI 2217/20 V2 Long "F5J"
1 x	AXI 2820/12 CYCLONE
1 x	AXI 2814/12 V2 Long
2 x	Cable video GoPro
1 x	Motor KAVAN PRO 2225-1600
1 x	Motor OS 3820-1200 electric
1 x	Female connector for 12 pines AWG
1 x	MAX BEC 2D plus EX
2 x	Electronic switch JETI SP06 Opto
1 x	MAX BEC
1 x	EWC3 40 cm wing connector
1 x	SPS 70V 100/200 A
1 x	EWC3 100 cm wing connector
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	AXI 2826/8 V2 Long
1 x	AXI 2808/16 V2

37,245.15EUR