Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85085

20.00EUR

EWC6 40 cm wing connector
[EMCA85085]

EWC6 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cables will be soldered directly to the PCB. Also 4 cables (one above one below) can be soldered. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, double EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Pan Head Screw M2x8 PH countersunk head temporarily out of stock	Nut for mounting M2 (4 pcs) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock
Protective Cover for wires Ø 3 mm 1000 mm temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST BLS905X HV V2.0 8Kg 20mm
93.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Vasa model Catapult
1 x	Xplorer1 anemometro
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 300 mm (2 pcs)
1 x	Spikes Band (5 m)
2 x	20x1000 mm Ring Strap Back To Back
1 x	20x200 mm battery rings
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
2 x	Big-Malibu XL Roof box with surfboard rack GREY
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Buy Perforated film 100 cm / 10 m
2 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	ABS 500 x 400 x 1 mm (white)
2 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
3 x	ABS 500 x 400 x 1,5 mm (white)
2 x	ARAMID honeycomb 1300x2600x2 mm
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	USB HLS prog. interface
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	CC 05
1 x	3 LiPo XH>EH adapter
1 x	Adapter lead MPX/EC3
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Adapter lead MPX/XT60
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Dean "T" - Futaba Adapter
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	30 cm BEC cable (female)
1 x	CC 01
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	5 LiPo XH>EH adapter
1 x	30 cm BEC cable (male)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CM-3
1 x	JETImodel SINGLE BEC
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	1/4 Pilot "Mike"
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Conector BEC female (10 pcs)
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	15 mm floating pad (30 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support pump Xicoy X45
1 x	Propeller POWER-PROP 13x9
1 x	Propeller electric carbon 7x7
1 x	Support Flush MPX Conector (6 pcs)
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Propeller POWER-PROP 12x9
1 x	Support FUEL DOT V3
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Porpeller HUNTER 480
1 x	Propeller electric carbon 10x7
1 x	Propeller POWER-PROP 13x8
2 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	Propeller electric carbon 8.5x6
1 x	PropCover 16-20" (2 pcs)
1 x	Propeller APC 13x4 Electric
1 x	Ring 320 mm length (5 pcs)
2 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 50 mm
1 x	Cinta Goldfix 1m
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	Fiberglass plate 620x540x1,0 mm
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	Conector Servo female 4 pines
1 x	Soporte carbono MR30 (2 pcs)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	LA500 pre-rotation gear hub
1 x	Motor rotor LA-500
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x	Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	SPS 70V 140/280 A
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Long Switch On/Off micro
1 x	Male connector for 10 pines AWG
1 x	EWC3 40 cm wing connector
1 x	MR30 connector male
1 x	Red 3m5 mm connector holder
1 x	PPM Encoder Module
1 x	Support XT60 conector (2 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Propeller MENZ-S 20x10 3 blades
1 x	Propeller MENZ-S 21x12
1 x	Propeller MENZ-S 15x6
1 x	Propeller POWER-PROP 9x5
1 x	Reductora IPS dual-motor 10,7:1 with spinner
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	Carbon plate 350x150x2.0 mm
1 x	Chopped glass fibre strands 0.2 mm
1 x	Carbon plate 350x150x1.0 mm
1 x	22x12D BIELA 3Bl propeller (3-blades)
1 x	22x8 BIELA propeller
1 x	22x10 BIELA propeller
1 x	23x10 BIELA propeller (4-blades) Scale
1 x	16x8 BIELA propeller (3-blades)
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	18x10 BIELA 3Bl propeller (3-blades)
1 x	Support Filtro FESTO
1 x	Soporte filtro FESTO (4 pcs)
1 x	16x10 BIELA propeller (3-blades)
1 x	Propeller MENZ-S 16x10
1 x	Propeller MENZ-S 21x8
1 x	Propeller POWER-PROP 16x8
1 x	Propeller MENZ-S 16x12
1 x	Propeller MENZ-S 18x8
1 x	Carbon plate 350x150x4.0 mm
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Chopped glass fibre strands 3 mm
1 x	Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x	Carbon plate 350x150x0.5 mm
1 x	Propeller 9x7 SlowFlyer
1 x	Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Retract undercarriage
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Propeller 9x4,7 SlowFlyer
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Cooler motor type 280
1 x	JIVE 80+HV Esc
1 x	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x	LA500 front gear holder
1 x	Baal link 4/14/4 (5 pcs)
1 x	ASW 15 5000 mm (Airwold)
1 x	Air filter MOKI
1 x	Moki Exhaust Bend 200 mm
1 x	ASK 21 6.8m
1 x	Moki Exhaust Bend 50VT
1 x	Baffles for Radial Moki S250/330 mm
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Glass fibre sleeve Ø 20 mm

16,231.38EUR