Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor ER-120 M3-34mm eje
21.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	DYNAMOMETER S-1580
2 x	Optical RPM Sensor
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Cap Hispano Aviación
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	SlowFlyer control horn (3 pcs)
2 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x	Softshell Hispano Aviación
1 x	Cable with accesories
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
2 x	Horn 13,5x16 mm (2 pcs)
2 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn 6/20 with M3 Bearing
1 x	LH long aluminium horn L31xH30 (2pcs)
3 x	Small aluminium horn blue (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	6 mm aluminium horn with patella
1 x	Horn 5/15 with M2 Bearing
1 x	Horn 6/27 with M3 Bearing
1 x	Horn for flap control (1 pcs)
1 x	Small aluminium horn red (2pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	RH long aluminium horn (2pcs)
1 x	20 mm carbon horn
1 x	Brass control horn M2 short for wire (2 pcs)
2 x	Small aluminium horn gold (2pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Vest clothes Hispano Aviación
1 x	Horn 6/35 with M3 Bearing
1 x	Horn with ball 40x30
1 x	Shirt Hispano Aviación
1 x	Cabel charger transmitter GRAUPNER
5 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	CC 02
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CM-3
2 x	TP/TopFuel - XH 2/3S Adapter
5 x	30 cm BEC cable (female)
4 x	Dean "T" - Futaba Adapter
1 x	CC 03
1 x	Adapter lead MPX/XT60
1 x	JETImodel SINGLE BEC
3 x	4 LiPo XH>EH adapter
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	BEC 3A FOXY
1 x	30 cm BEC cable (male)
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	USB HLS prog. interface
4 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	ABS tube 14.0x10.0x1000 mm
2 x	Interface Jack Adapter IKARUS
1 x	Oratex Natural White 2m
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Autogyro Cierva C30 Spain
1 x	Motor rotor LA-500
1 x	LA500 housing-lower cyclic
1 x	Straightened rod Ø 1.0 mm x 1000 mm
2 x	Nut M1,6
1 x	Wheel keeper washer
2 x	Ball joint long
1 x	Screws flush mount M2
2 x	Side Plate
2 x	Nut M2
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	CC 05
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	USB Mini Camera endoscope
1 x	160 mm carbon undercarriage (2pcs)
2 x	GameCommander USB Universal
1 x	Legs + electric brakes for Viper Jet 90
2 x	Legs + electric brakes for Viper Jet 1700 mm
1 x	Slave-cable USB Easy Sim
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	ABS angle 6,0x6,0x1000 mm
1 x	800TVL CMOS camera for FPV
1 x	Nose leg 155 mm with wheels 70 mm
1 x	Micro control horn T2 Ø 1
1 x	Brass control horn M2 long for wire (10pcs)
1 x	TrainerCord (master-learner)
1 x	Connector Sub-D 2+5 Female
1 x	Long Switch On/Off micro
1 x	Male connector for 6 pines AWG
1 x	Brass control horn M2 large for wire (2pcs)
1 x	EWC3 40 cm wing connector
1 x	Adapter lead MPX/EC3
1 x	3 LiPo XH>EH adapter
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Male connector for 12 pines AWG
1 x	2 LiPo XH>EH adapter
1 x	PSC 5
1 x	Long adjustable control horn 3x34
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Steel Screw M1x8 (10 pcs)
2 x	Blade holder center
2 x	Head core
1 x	Tail boom
2 x	Screws M1,6x6 Allen
1 x	Blade holder upper
1 x	Tail support (2 pcs)
1 x	Head upper part
1 x	Steering lever
1 x	Rotorhead pushrod
1 x	Rotor Mast
1 x	Rotorshape Elevator
1 x	Rudder
1 x	Balls 4 mm
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Micro control horn (2 pcs)
1 x	Horn mando long (2 pcs)
1 x	Long adjustable aluminium control horn 2,8x24
1 x	Indoor hinge with servo arm integraded
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	Blades 330mm
2 x	Interface Realflight Simulator
1 x	Blade holder lower
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Long horn 50x26
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Adjustable brass horn threaded M3
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Small control horn with bearing (2 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Long adjustable control horn with bearing
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	16mm Gear-Spotlight, 4W
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	Rudder forward 70x28 "type Kato"
2 x	CC 01
2 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Motor OS 3805-1200 electric
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm

4,978.08EUR