119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Black silicone 1,0 qmm wire (50 m)
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x 5 line servos wire black (1 m)
1 x Cable set PREMIUM , fuselage/wing one4one
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Green silicone 0,25 qmm wire (50 m)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Cable Cargador FUTABA
1 x PVC 0,14 qmm servos wire Graupner (100 m)
2 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x Silicon black 2,5 qmm cable ( 25 m)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Green silicone 0,25 mm² wire (25 m)
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x 10 mm Quick clamp_L (6 pcs)
2 x Motor A2212/13T
1 x Xplorer3 anemometro
1 x Xplorer1 anemometro
1 x Extension 90 cm (Futaba)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Cabel "Y" 30 cm (graupner)
1 x Futaba Female 40 cm extension
2 x Prolongador S-Bus JR/JR 20cm
1 x Extension 100 cm (Futaba)
1 x 200 mm extensión servo HITEC/JR
1 x Extension silicon 30 cm female (Futaba)
2 x Extension lead 15 cm Multiplex
2 x Extension silicon 10 cm (Graupner)
2 x Extension 30 cm (Futaba)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x Yellow smoke canister 100 g
1 x "S" set for planes
1 x Red smoke canister 100 g
1 x PCARD Wireless System
1 x "M" set
2 x Parachutist
2 x White smoke canister 65 g
1 x Initior Transmitter FTX2 Wireless
1 x Red smoke canister 65 g
2 x 3l Smoke oil
2 x White smoke bombs AX-9 (10 pcs)
1 x Yellow smoke canister 140 g
2 x Yellow smoke canister 65 g
1 x White smoke bombs AX-3 (10 pcs)
2 x Black smoke bombs AX-60 (5 pcs)
2 x Parachute expulsion foam
2 x Smoke set "Glider"
2 x Blue smoke canister 100 g
1 x Red smoke bombs AX-60 (5 pcs)
1 x B4-0 rocket charges (6 pcs)
2 x Mixers smoke bombs AX-60 (5 pcs)
1 x Remote electric ignition system
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x ABS tube 2.0x1.0x1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Ball link M2,5 (10 pcs)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
2 x Support Flush MPX Conector (6 pcs)
2 x Recessed MPX connector support (6 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Tube support Ø 6mm (10 pcs)
2 x Support Antena 2.4 Ghz (2 pcs)
1 x White smoke canister 140 g
2 x Red smoke canister 140 g
2 x Green smoke canister 65 g
1 x Vasa model Catapult
1 x Propeller POWER-PROP 7x7
2 x Head runner
1 x Head upper part
1 x Tail tube RAINBOW
1 x Raer wall
1 x Fuselage Autogyro RAINBOW
1 x Wheel keeper washer
1 x Screw M3x16
1 x 4 blades set
1 x Blade Holder (3 blades)
2 x Futaba Female 40 cm extension
1 x Cable S.BUS 3 salidas 300 mm
2 x Female connector JST SH 1.0mm with 10 cm wire
2 x TP/TopFuel - XH 2/3S Adapter
1 x TrainerCord (master-learner)
1 x CC 01
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x DUPLEX 2.4EX Central Box 320
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Smoke set "M"
2 x Prolongador S-Bus JR/JR 10cm
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension 7.5 cm
2 x White smoke bombs AX-60 (5 pcs)
1 x Ventral support for AX-18/AX-60
1 x Extension silicon 10 cm (Futaba)
2 x Extension silicon 75 cm (Graupner)
3 x Extension silicon 30 cm male (Graupner)
2 x Extension silicon 35 cm male (Futaba)
2 x Extension silicon 100 cm (Graupner)
2 x Extension silicon 50 cm (Futaba)
1 x 4 LiPo XH>EH adapter
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Male Prolonger TP 4/5S
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Futaba male 40 cm extension
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
2 x Cabel "Y" 15 cm
2 x Blue smoke canister 140 g
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Premium servo extension 75cm
1 x Extension silicon 25 cm (Futaba)
1 x Extension PVC 150 cm (Graupner)
1 x Cabel "Y" 30 cm (Futaba)
1 x Circlick securite
1 x Extension silicon 50 cm (Graupner)
1 x Extension 15 cm (Futaba)
1 x Extension silicon 75 cm (Futaba)
2 x Green smoke canister 100 g
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
2 x Green smoke canister 140 g
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Vacuum bag, 1200 mm x 50 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Electric Fuel Pump 12v
1 x White smoke canister 100 g
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Pulley brass 8/2 (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Light semi-synthetic Oil PUTOLINE TT (1l)
1 x Support pumb/filter Xicoy X45
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support XT60 conector (2 pcs)
1 x Ball Bearing Oil 25 ml
1 x Castrol Oil TTS 1l
1 x Conector MT-60 (pair)
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x 10 mm aluminium spinner (Kavan)
1 x Ciano KAVAN Thick 20g
1 x BETA 1400 ARF Red
1 x Fuel bottle 500 ccm
1 x Ciano KAVAN Thin 20g
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Initior Receiver FRX2 Wireless
1 x Electric rocket starters (6 pcs)
1 x Screws flush mount M2
1 x JETImodel SINGLE BEC
1 x Propeller 11x4,7 SlowFlyer
1 x Hacker X-Pro USB interface V2
1 x Magnetic Interruptor MULTIPLEX
1 x Selfstart electronic switch
1 x DPS Switch JR/JR
1 x wire tensioner (silver)
1 x Wire easy tensioner (red)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Cierva C30 Body Spain
1 x Ball joint long
1 x Head spacer
1 x PropCover 16-20" (2 pcs)
1 x Cierva C30 spanish decoration Stickers
1 x Nut M2
1 x Xoar Electric Beechwood Prop 20x10
1 x SPARK Switch 7.4v
1 x Bungee HLG Premium
1 x Extension silicon 30 cm male (Futaba)
1 x Extension silicon 30 cm female (Graupner)
1 x SBEC 40
1 x Male connector for 16 pines AWG
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Electronic switch JETI SP06 Opto
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Male connector for 20 pines AWG
10,624.49EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies