119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Medidor ángulos y/o incidencias
2 x Field folding model stand SebArt
2 x Truck-trailer for gliders 720 x 239 mm
1 x Propeller balancer
2 x Surface Indicator Gauge Small
2 x Angle measurer
1 x Angle of incidence meter
1 x Field folding model stand
2 x Truck-trailer for gliders 720 x 285 mm
1 x Propeller balancer
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
2 x BALSA trip 3.0x3.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
2 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
2 x BALSA trip 2.0x10.0x1000 mm
1 x Circlick securite
1 x Electric rocket starters (6 pcs)
1 x USB HLS prog. interface
3 x White smoke canister 100 g
2 x TP/TopFuel - JST-EH 4/5S Adapter
2 x Initior Transmitter FTX2 Wireless
1 x Smoke set "M"
1 x Smoke set "Glider"
1 x CC 05
1 x AX-60 starters (5 pcs)
1 x "S" set for planes
1 x 30 cm BEC cable (male)
2 x Blue smoke canister 140 g
1 x Mixers smoke bombs AX-60 (5 pcs)
2 x Remote electric ignition system
1 x White smoke bombs AX-18 (5 pcs)
1 x Black smoke bombs AX-60 (5 pcs)
1 x MPX-Dean "T" Adapter
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Red smoke canister 65 g
1 x Adapter lead MPX/EC3
1 x Ventral support for AX-18/AX-60
1 x Blue smoke canister 100 g
1 x PCARD Wireless System
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x "M" set
1 x 2 LiPo XH>EH adapter
2 x TP/TopFuel - XH 2/3S Adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 3 LiPo XH>EH adapter
1 x 30 cm BEC cable (female)
1 x CM-3
1 x Yellow smoke canister 100 g
1 x 3l Smoke oil
1 x B4-0 rocket charges (6 pcs)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x AX-60 starters (5 pcs)
1 x Green smoke canister 100 g
1 x BEC 3A FOXY
1 x JETImodel SINGLE BEC
1 x 4 LiPo XH>EH adapter
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Red smoke canister 140 g
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Yellow smoke canister 65 g
1 x 5 LiPo XH>EH adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Cross Connector 4.0 mm x 1000 mm
1 x Ring 320 mm length (5 pcs)
1 x ORACOVER transparent Yellow (10 m)
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Small Crow DLE-170M
1 x 4 blades set
2 x Steering lever
1 x Ball joint long
2 x Bearing 3x6x2,5
1 x Blade Holder Full (4 blades)
1 x Complet landing gear
1 x Balls 4 mm
1 x Head upper part
1 x Head spacer
1 x Cierva C30 spanish decoration Stickers
1 x Xplorer2 anemometro
1 x Xplorer3 anemometro
1 x Oil FUCHS 1 liter
1 x Balsa panel 5.0x100x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Birch plywood plate 600x300x4.0 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x 120x60 mm SLH KOVO wheel
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Balsa panel 1.5x100x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x BALSA trip 10x10x1000 mm
1 x Extension 5 lipos JST - JST/C
1 x Electronic switch JETI SP06 Opto
1 x White smoke bombs AX-9 (10 pcs)
1 x Cabel charger transmitter GRAUPNER
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x PSC 6
1 x MAX BEC 2
1 x Magnetic Interruptor MULTIPLEX
1 x Prolonguer for Balancer Thunder Power 6S
1 x Extension 5 lipos JST/C - JST
1 x Aluminium sheet 500x250x0,5mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Propeller hub spacer 8/5.5
1 x Jeti Black cap
1 x Blade Holder Full (3 blades)
1 x FIALA Propeller 19x12 Electric
1 x Screws M1,6x6 Allen
1 x Head core
1 x Sheet Depron Aero 1250x800x3 mm
1 x "S" set for boats
1 x Smoke set "S"
5,008.90EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies