Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ULTIMATUM 2.0 PRO "NAVY"
2,900.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Parachutist
1 x	Red smoke canister 140 g
1 x	resin-hardener package L-385 with hardener H-385
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	"S" set for boats
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Angle support XT60 conector
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Ring 320 mm length (5 pcs)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	LOWER TOW HOOK
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	AC-10 pre-rotacion with motor
1 x	Round Rod 1,5x1000 mm
1 x	Xplorer4 anemometro
1 x	Round Rod 5,0x1000 mm
1 x	DPSI Ampere battery backer
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Ball link M1.6 (6 uds)
1 x	Green smoke canister 65 g
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	White smoke canister 140 g
1 x	Remote electric ignition system
1 x	AX-60 starters (5 pcs)
1 x	Red smoke canister 100 g
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Oracover light Grey 2m
1 x	2,0x50 mm allen screwdriver
1 x	Horn 13,5x16 mm (2 pcs)
1 x	PPM Encoder Module
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	1/12 Pilot "Cougar"
1 x	28x5 mm wires output (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	1/12 Pilot "Fighter"
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Horn 6/27 with M3 Bearing
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Horn 5/15 with M2 Bearing
1 x	Ball link M3 RPA's-UAV's
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Hot Glue Stick GREEN
1 x	White gelcoat 1 Kg
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Red smoke canister 65 g
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Initior Transmitter FTX2 Wireless
1 x	Yellow smoke canister 100 g
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Slave-cable USB Easy Sim
1 x	ABS angle 6,0x6,0x1000 mm
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Green smoke canister 100 g
1 x	White smoke canister 100 g
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	3l Smoke oil
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Medium pin type hinge (12 uds)
1 x	Medidor ángulos y/o incidencias
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	1/6 Pilot "Buddy"
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Dean-T Plug Mold
1 x	Conector JR Servo male (50 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Conector JAPAN G2 Set 5 pares
1 x	6 mm M3 variable horn
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	SE Ring 450 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Allen wheel collar M4x4
1 x	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x	Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x	Tube Pitot to PIXHAWK
1 x	Oracover CARBON Metalic 1 m
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Tape GFK 38 mm
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x
1 x	Horn DUBRO 1/2A
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	45 mm rods + T patellas set for direction control
1 x	Oracover Yellow CUB 10 m
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Support Pitot JETI
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	20x200 mm battery rings
1 x	ORACOVER Fluor red (2 m)
1 x	Digital scale up to 40 kg
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Oracover Yellow CUB 2 m
1 x
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Dust collector for mould cleaning
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	5 mm M2 variable inclined horn
1 x	Angle measurer
1 x	Micro flex hinge (12 uds)
1 x	100 mm rods set for direction control
1 x	Horn mando long (2 pcs)
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Ball Link Plier
1 x	SE Ring 240 mm (2 pcs)
1 x	Tow hook for tug
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Oratex Silver 2m
1 x	Support pumb/filter Xicoy X45
1 x	Softshell Hispano Aviación
1 x	WingFix ULTRA Black Edition
1 x	SE Ring 330 mm (4 pcs)
1 x	Propeller balancer
1 x	Ply-Span 450x600/13g Orange
1 x	Copier 2x20 cm pcs
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Oracover Yellow CADMIO 2 m
1 x	6 mm aluminium horn with patella
1 x	SE Ring 200 mm (2 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	Allen wheel collar M3x5
1 x	6 mm red aluminium threaded horn with patella
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Round Rod 6,0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Jeti Black cap
1 x	Socket head ball link M3 (2 uds)
1 x	Hot Glue Stick BLACK
1 x	Adapter lead MPX/EC3
1 x	Strip 2,5x1,25x330 mm
1 x	Baseplate servo
1 x	Oils Pumps Empty (1 liter)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	Ball Link Plier
1 x	CC 03
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Round Rod 2,5x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Dean "T" - Futaba Adapter
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Short ball link M2 (6 uds)
1 x	30 cm BEC cable (female)

4,380.47EUR