Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	6 mm M3 variable inclined horn
1 x	6 mm M3 variable horn
1 x	Cable with accesories
1 x	Horn 6/35 with M3 Bearing
1 x	Horn for flap control (1 pcs)
2 x	Control horn long w/ball
1 x	Cable control set
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Horn DUBRO 1/2A
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
2 x	Horn mando small (2 pcs)
2 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	20 mm carbon horn
1 x	Horn 5/10 with M2 Bearing
1 x	Adjustable brass horn threaded M3
1 x	Extra long horn 60x30
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 20x28,5 mm (2 pcs)
1 x	5 mm M2 variable horn
1 x	6 mm blue aluminium threaded horn with patella
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	USB Mini Camera endoscope
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x
1 x	Horn 6/27 with M3 Bearing
1 x	Long ball link M3 (6 uds)
1 x	Interface Realflight Simulator
1 x	Horn 6/20 with M3 Bearing
1 x	PIT (Aero-Naut)
1 x	METEOR 1.000 mm kit
1 x	Soporte grifo FESTO (2 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Support ECU Xicoy X-45
1 x	Support Pitot JETI
1 x	Angle support XT60 conector
1 x	IKARUS plane
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Futaba 38 mm servo arm with ball link
1 x	SD HC 8 GB
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Futaba 46 mm servo arm with ball link
1 x	Futaba 20 mm servo arm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Lead with adhesive (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Allen wheel collar M3x5
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Snap long M2 (10 uds)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Pushrod octagone 3/2 with coupler M2
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Fiberglass tube 6/4x1000mm
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Snap short M2 (10 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	Cockpit aluminium closing 5.4g
1 x	SUS wire 3m (nylon coated)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Clip mini fixing for wing (2 pcs)
1 x	11 mm Rubber pads (14 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Pushrod octagone 4/3
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Cockpit metalic closing
1 x	41x5,5 mm wires output (2 pcs)
1 x	90 mm rods + T patellas set for direction control
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	38x4,5 mm wires output (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	45 mm rods set for direction control
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	80 mm rods set for direction control
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Turbo Timber Evolution 1.5m PNP
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Cap Hispano Aviación
1 x	CC 05
1 x	DRACO 2.0m PNP
1 x	Turbo Timber Evolution 1.5m BNF

4,176.53EUR