119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Xplorer4 anemometro
2 x Xplorer2 anemometro
2 x Xplorer3 anemometro
1 x Towing hook
1 x LOWER TOW HOOK
3 x Fixed launching hook
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x CC 03
1 x CC 05
1 x Motor DLE 430 cc - Paramotors
1 x Big Crow DLE-170M
1 x JETImodel SINGLE BEC
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Motor DLE 200cc Premium Muffler
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Silent-blocks DLE 170M
2 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x USB HLS prog. interface
2 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 4 LiPo XH>EH adapter
1 x 3 LiPo XH>EH adapter
1 x Cabel charger transmitter GRAUPNER
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Circlick securite
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x CC 01
1 x 2 LiPo XH>EH adapter
1 x BEC 3A FOXY
1 x MPX-Dean "T" Adapter
1 x Dean "T" - Futaba Adapter
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Small Crow DLE-170M
1 x TP/TopFuel - XH 2/3S Adapter
1 x 20x1000 mm Ring Strap Back To Back
1 x Spikes Band (5 m)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Tape GFK 25 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 350 mm (2 pcs)
1 x 20x200 mm battery rings
1 x SE Ring 250 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 330 mm (4 pcs)
1 x Tape GFK 50 mm
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 480 mm (2 pcs)
1 x Cable S.BUS 3 salidas 100 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x RF9 Flight Simulator with Spektrum Controller
1 x 
1 x Towing hook
2 x SERVO HOLDER
1 x Xplorer1 anemometro
1 x Small pinned hinge (12 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x 25 mm reinforced hinge
1 x Long pinned hinge (6 uds)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Spray EC Red 400ml
1 x Release wax 250ml
1 x 500 ml sealer (DOPE)
1 x Universal Colour Paste deep black 250 g
1 x 
1 x Female connector for 12 pines AWG
1 x Male connector for 20 pines AWG
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x EWC3 100 cm wing connector
1 x Extension 2/3 lipos JST - JST/C
1 x USB interface ALTIS
1 x SE Ring 200 mm (2 pcs)
1 x Male connector for 6 pines AWG
1 x Female connector for 6 pines AWG
1 x Tape GFK 38 mm
1 x 30 mm Alu spinner 3 mm pleg. propeller
1 x 50x45 mm micro-mini servo cover
1 x BULLIT Wing 1095 mm
1 x 65 mm mini servo cover
1 x Hobbylite Filler, Balsa colour
1 x Spray Graphit 33
1 x Robart Door Hinge (Pk2)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x MAX BEC
1 x DPSI Ampere battery backer
1 x Electronic switch JETI SP06 Opto
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Cabling for Fox MDM1 wings
1 x SBEC 40
11,065.04EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies