Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAVAGE Max Red 1080 mm
129.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Connectors MPX male
1 x	Ball link M3 (6 uds)
2 x	Ball link M1.6 (6 uds)
1 x	Socket head ball link M3 (2 uds)
2 x	Socket head long ball link M3 (6 uds)
2 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Ball link M2 (10 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
2 x	Ball link M3 (10 pcs)
2 x	Joint with bearing M2,5 22x5,5
2 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Joint with bearing M3 22x5,5
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	Socket head ball link M3 (2 uds)
2 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Short ball link M3 (6 uds)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	6 mm ball link M3 (10 pcs)
2 x	Short ball link M1.6 (6 uds)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
3 x	USB Mini Camera endoscope
2 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Xplorer2 anemometro
1 x	SERVO HOLDER
1 x	Circlick securite
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	3 LiPo XH>EH adapter
1 x	Xplorer1 anemometro
1 x	CM-3
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 05
1 x	Dust collector for mould cleaning
1 x	Fixed launching hook
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	30 cm BEC cable (male)
1 x	Adapter lead MPX/EC3
2 x	JETImodel SINGLE BEC
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	BEC 3A FOXY
2 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	4 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	USB HLS prog. interface
1 x	Oil FUCHS 1 liter
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Adjustable launching hook
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Tow hook for tug
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	TrainerCord (master-learner)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	MPX-Dean "T" Adapter
1 x	Hot Glue Stick GREEN
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	CC 03
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Dean "T" - Futaba Adapter
1 x	Ball Link Plier
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Z Bender - S Type Tool
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	CC 01
1 x	Adapter lead MPX/XT60
1 x	Cabel charger transmitter GRAUPNER
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Oils Pumps Empty (1 liter)
1 x	Big Crow DLE-170M
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	1/12 Pilot "Langley"
1 x	1/6 Pilot "John"
1 x	Tube Pitot to PIXHAWK
1 x	MPX Sub-D Adaptor
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH female balance (2S) connector (2 pcs)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	1/6 Pilot "Buddy"
2 x	DPSI magnetic switch actuator (housing)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connector CAN 15
1 x	XH female balance (5S) connector (2 pcs)
1 x	PowerBox SparkSwitch RS
1 x	PSC 6
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	1/6 Pilot "Tony"
1 x	"Taxi Tank" Fuel Tank
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	UBEC 6A KAVAN
1 x	USB Adaptor OPTronics
2 x	Extension 2/3 lipos JST - JST/C
1 x	Electronic double valve landing gear
1 x	MAX BEC
1 x	Tygon tube 4.8 x 3.2 mm 15 m
1 x	Towing hook
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	FUELING VALVE GASOLINE LARGE (1PC)
1 x	800TVL CMOS camera for FPV
1 x	Blind nut M8 (10 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	SPS Remote switch actuator
1 x	120x60 mm SLH KOVO wheel
1 x	18m Fitting barb
1 x	Magnetic Interruptor MULTIPLEX
1 x	51 mm INO spinner (carbon imitation)
1 x	MAX BEC 2D plus EX
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Head upper part
1 x	Extension 2/3 lipos JST/C
1 x	3 blades set
1 x	Head lower part New
1 x	Head core
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Spinner 104x131 mm 115 g CFK-BS
1 x	Baering 3x8x4
1 x	57 mm INO spinner (carbon imitation)
1 x	Cierva C30 Body Spain
1 x	Connector Sub-D 2+5 Male
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Male connector for 12 pines AWG
1 x	102 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x	Crystal Universal RX 35.140 Ch 74
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	2 LiPo XH>EH adapter
1 x	USB interface ALTIS
1 x	Head runner
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	MPS Gas-Cap-Powerswitch
1 x	Baseplate servo
1 x
1 x	55 mm aluminium spinner (Kavan)
1 x	Short ball link M2 (6 uds)
1 x	Socket head long ball link M3 (2 uds)
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	60 mm aluminium spinner (Kavan)
1 x	BETA 1400 ARF Red
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	Conector MT-60 (pair)
1 x	Ball link M3 RPA's-UAV's
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Servo BMS-4112
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	10-15mm Servo Arm
1 x	Servo HITEC HS-225 BB
1 x	Gear set HITEC HS-645MG/5645MG/5685MH
1 x	Gear set HITEC HS-65 HB
1 x	Gear set HITEC HS-85
1 x	Gear set HITEC HS-125MG/5125MG
1 x	Servo HITEC HS-311
1 x	Servo HITEC HS-45 HB
1 x	Servo HITEC D-955 TW Titanium
1 x	Gear set HITEC HS205/225MG/5245MG/7245MH
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Servo HITEC D625 MW
1 x	Screws set for Hitec MG arms servo
1 x	Indoor motor holder
1 x	Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x	Propeller Pleg CAM Carbon 12x6.5
1 x	Encendido CDI RCAME 1/4*32 Single 120º
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Ignition bed V2 Red color
1 x	250 mm / 16 mm Airbrakes
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	2,3 mm Prop Adapter M6
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	CA Glue (medium) 20g

6,541.98EUR