Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85221

79.90EUR

PWC6 PowerWingConnector for 6 servos with fuselage socket
[EMCA85221]

PWC6 PowerWingConnector for 6 servos with fuselage socket

Product description and features
Easy to handle plug system for wing wiring and up to 6 servos.
Please note:
Plus and minus pole are combined for all connected consumers.
The PWC6 wing plug must be screwed between wing and fuselage. On the pin strip inside the wing the servo cables can easily be plugged and secured with the enclosed shrinking hose.
The PWC6 fuselage socket is placed inside the fuselage. On the pin strip the patch cables to the receiver can be connected. Also this plug connection can be secured with the enclosed shrinking hose.
PWC PowerWingConnector system's advantages
Reverse polarity protection
Vibration safe connection because of locking
Easy mounting due to packaging
No soldering necessary
Up to 22A permanent current
Delivery contents
1 PWC6 wing plug, 1 PWC6 fuselage socket and 2 shrinking hoses.

Notice: Plus and minus pole are combined for all connected consumers. When used with a JETI Duplex Central Box (100/200/220/400), the overcurrent protection of the servo slots is bridged.

under request

Reviews

Customers who bought this product also purchased

XT-60 connector (female) under request	Turbine MAMMOTH 25.4 Kg under request	Propeller MENZ-S 20x10 under request
Connectors banna oro 2 mm (M/F) under request	Propeller MENZ-S 22x8 under request	MPS Gas-Cap-Powerswitch under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ULTIMATUM 2.0 PRO "Joker 7N"
2,900.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

4 x	Strip 1,5x1,5x330 mm
3 x	Round Rod 5,0x1000 mm
4 x	Strip ABS 2.0x10.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
3 x	Round Rod 1,5x1000 mm
3 x	ABS Strip 1.0x3.0x1000 mm
4 x	Round Rod 1,0x1000 mm
3 x	Strip ABS 2.0x5.0x1000 mm
3 x	Round Rod 2,0x1000 mm
2 x	Strip ABS 2.0x3.0x1000 mm
2 x	Strip 3,5x1,75x330 mm
3 x	ABS Strip 1.0x4.0x1000 mm
3 x	ABS Strip 1.5x3.0x1000 mm
3 x	ABS I Strip 10x5x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
3 x	Round Rod 6,0x1000 mm
3 x	ABS Strip 1.5x6.0x1000 mm
3 x	Round Rod 2,5x1000 mm
2 x	Round Rod 3,0x1000 mm
3 x	Round Rod 1,25x1000 mm
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Short ball link M3 (6 uds)
1 x	Joint with bearing M2,5 22x5,5
1 x	Ball link M1.6 (6 uds)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Long ball link M2 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	Socket head ball link M3 (2 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Ball link M3 (10 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Long ball link M3 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Socket head long ball link M3 (6 uds)
1 x	Ball link M3 (6 uds)
1 x	Short ball link M2 (6 uds)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Ball link M2 (10 pcs)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	6 mm ball link M3 (10 pcs)
1 x	Parachute PV6 for F3J
2 x	Wing OXY 5,0 m2
1 x	PCARD Wireless System
1 x	Futaba Female 40 cm extension
1 x	Extension silicon 25 cm (Graupner)
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Support Pitot JETI
3 x	Round Rod 4,0x1000 mm
1 x	Recessed MPX connector support (6 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Ventus 1:4 set of instruments
2 x	ABS Strip 1.0x2.0x1000 mm
2 x	Strip 2,5x1,25x330 mm
1 x	Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x	Z-shaped servo mount
1 x	LUCAS pilot ARTF
1 x	Para-RC Trike "RC-Bullix"
1 x	ALU servo arm 90º 3 mm shaft
1 x	Gold aluminium servo arm V1-JR 1,25" inch M3
1 x	Servo MKS 6100 DS
1 x	Servo BMS-4112
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
3 x	Servo GO-1081 MG 45 kg.cm 0.085s/60º
2 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Nut M2 securing
1 x	Raer wall
1 x	Screws M1,6x6 Allen
1 x	Windsock Ozone L - 700 mm
1 x	Rescue 1,8m2 / BackPack
1 x	Para-RC Mix
1 x	Paramotor BackPack XXS (without accessories)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
2 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Profile ABS half cane 8.0x1000 mm
2 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x	Profile ABS Square 3 x 1000 mm
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Aramid 50 daN 50 m
1 x	Servo GO-02 Digital 1.8g
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Rudder 2_Tray 4~4.5 inch
1 x	HV6150 Digital Servo
1 x	Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x	Rudder 2_Tray 3.5~4 inch
2 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Brazo servo MKS Metal M3-L:30 (2 pcs)
2 x	Servo GO-1053 MG 20.0kg
1 x	Servo Mount S (red)
2 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Servo AN-20 MGBBA
1 x	Servo BLUE Bird BLS-H71B v2
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Servo AN-8 HBA
1 x	Servo GO-09 9g
1 x	50 mm servo arm with bearing (2 pcs)
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Servo GO-1013 MG 3.8kg
1 x	Servo MKS HBL380
1 x	Propeller POWER-PROP 7x7
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	ABS tube 8.0x7.0x1000 mm
3 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	JETImodel SINGLE BEC
2 x	CC 02
2 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	ABS Strip 1.5x4.0x1000 mm
2 x	BEC 3A FOXY
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
3 x	4 LiPo XH>EH adapter
3 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Adapter lead MPX/EC3
3 x	CC 01
3 x	ABS Strip 1.5x2.0x1000 mm
3 x	MPX-Dean "T" Adapter
3 x	30 cm BEC cable (male)
1 x	Adapter lead MPX/XT60
2 x	ABS Strip 1.5x8.0x1000 mm
2 x	Circlick securite
2 x	Dean "T" - Futaba Adapter
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	2 LiPo XH>EH adapter
2 x	CC 05
2 x	TP/TopFuel - JST-EH 4/5S Adapter
2 x	Battery charging cable XT60
1 x	ABS I Strip 20x10x1000 mm
2 x	Copper lacquer wire Ø0,2 mm (5 m)
3 x	5 LiPo XH>EH adapter
2 x	USB HLS prog. interface
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	3 LiPo XH>EH adapter
2 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	1,2x1000 mm 2:1 red termoretract tube
2 x	30 cm BEC cable (female)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	USB Interface Adapter
1 x	Ballast 700gr OPALE
1 x	Savox Brushless Servo SC-1251 MG
1 x	Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue)
1 x	Servo DITEX TD2612S
1 x	AX-60 starters (5 pcs)
2 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Red aluminium servo arm V2-Futaba 1,5" inch M3
1 x	SAVOX SH 0254 servo
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	20 g tin paste
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	1,5x50 mm allen screwdriver
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	LightBox SR
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Servo BLS-M55B 61.2kg
1 x	USB interface ALTIS
1 x	ABS tube 6.0x4.0x1000 mm
1 x	SPS 70V 140/280 A
1 x	Multi-adapter balancer JST - TP
1 x	JETImodel DPS 40
1 x	Opto Gas Engine Kill Switch
1 x	MAX BEC 2
1 x	Male connector for 20 pines AWG
1 x	Hacker X-Pro USB interface V2
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Interruptor RX/Batterie
1 x	MPS Gas-Cap-Powerswitch
1 x	SWTU2 switch
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	SBEC Jeti
1 x	Opto Gas Engine Kill Switch
1 x	Extension 6 lipos XH > EH
1 x	Long Switch On/Off micro
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Multi-adapter balancer JST/C - TP
1 x	MAX BEC
1 x	CC 03
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Male Prolonger TP 4/5S
2 x	Cabel charger transmitter GRAUPNER
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	PowerBox SparkSwitch RS
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	SBEC 40
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	SPS 70V 100/200 A
1 x	Extension 5 lipos JST/C - JST
1 x	Carbon plate 350x150x3.0 mm
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Connector Sub-D 2+5 Male
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cabling for Fox MDM1 wings
1 x	SPARK Switch 5.9v
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Micro Switch button
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Futaba External voltage input cable Futaba CA-RVIN-700

7,274.44EUR