119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cap Hispano Aviación
1 x Propeller POWER-PROP 13x9 Izda
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x DUPLEX 2.4EX Central Box 210
1 x LASER 73" 1.85m (05) PILOT
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Vest clothes Hispano Aviación
1 x Joint with bearing M3 22x5,5
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Short ball link M3 (6 uds)
1 x Beech dowels 10 mm x 1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x BEC 3A FOXY
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x ORACOVER Fluor red (2 m)
1 x ABS Strip 1.5x3.0x1000 mm
1 x 
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Stickers-digit for marking
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Oracover CARBON Metalic 1 m
1 x ABS tube 3.0x1.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x 1/6 Pilot "Garry"
1 x ABS Strip 1.0x3.0x1000 mm
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x 102 mm aluminium spinner
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x ABS tube 16.0x14.0x1000 mm
1 x 102 mm INO spinner (carbon imitation)
1 x ABS tube 8.0x7.0x1000 mm
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Double conector with JR adapter and 200 mm extension
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x "Taxi Tank" Fuel Tank
1 x Strip 1,5x1,5x330 mm
1 x Tube Pitot to PIXHAWK
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x 140 mm rods set for direction control
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Ferrita 14x8x5.5 mm
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Small pinned hinge (12 uds)
1 x 100m servo "Premium" wire (white/red/blue)
1 x Support XT60 conector (2 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x Support pumb/filter Xicoy X45
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support conector MPX (6 pcs)
1 x DYNAMOMETER S-1580
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Extension Arm for Carburetor (red)
1 x Suction funnel for carburetor 90D-M (red)
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x LA500 nose
1 x Pilot LA 500
1 x Blade Holder Full (3 blades)
1 x 3 blades set
1 x Blade Holder (3 blades)
1 x DLE 55 carburetor
1 x Hose clips 6 mm
1 x EME 55 cc carburetor WALBRO
1 x Tail tube RAINBOW
1 x Blind nut M4 (10 pcs)
1 x LOWER TOW HOOK
1 x SERVO HOLDER
1 x DPSI magnetic switch actuator (PCB)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Multi-adapter balancer JST/C - TP
1 x Cockpit plastic closing
1 x Opto Gas Engine Kill Switch
1 x Carbon plate 350x150x0.5 mm
1 x Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Landing gear axle Ø 6 mm (2 uds)
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Crystal Universal RX 35.040 Ch 64
1 x Crystal TX 35.180 Ch 78
1 x Landing gear axle 4x21 4 mm (2 uds)
1 x Crystal Universal RX 35.150 Ch 75
1 x ABS 500 x 400 x 0,5 mm (white)
1 x 3 LiPo XH>EH adapter
1 x Connector Sub-D 2+5 Male
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x 30 cm BEC cable (male)
4,620.91EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies