Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Regulador Hobbywing Platinum 260A HV SBEC V5
520.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	LUCAS pilot ARTF
2 x	Trike XL motor set (motor+esc+prop)
2 x	Wing OXY 5,0 m2
1 x	Paramotor BackPack XXS 2
3 x	Paramotor BackPack XXS (without accessories)
2 x	Opale Rucksack
2 x	Aramid 50 daN 50 m
1 x	Cap Hispano Aviación
1 x	Paramotor Kit Camo H1.5/ Ben Red
2 x	Ballast 700gr OPALE
1 x	Paramotor Trike XL
1 x	Softshell Hispano Aviación
1 x	Clip fixing for wing (2 pcs)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Short ball link M2 (6 uds)
1 x	Joint with bearing M3 22x5,5
1 x	M3 Maxi ball link (2 uds)
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	25 mm fenders (10 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
2 x	BALSA triangular 10x10x1000 mm
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	12 mm floating pad (49 pcs)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Oracover Azul Cielo 2 m
1 x	3 mm Leader (L 100 mm)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	1/12 Pilot "Langley"
1 x	ORACOVER Ferrari red (2 m)
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	2.3 mm Adapter for 30 mm spinners
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	PIX Hawk with accesories
1 x	SE Ring 240 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Conector MR-60 (pareja)
1 x	Conector BEC female (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Pilot "Anthony" (Slimline)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Oracover CARBON Metalic 1 m
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Cinta Goldfix 1m
1 x	Balsa panel 3.0x100x1000 mm
1 x	290 mm M4/4 mm Prop shaft
1 x	15 mm floating pad (30 pcs)
1 x	14 mm portholes (10 pcs)
1 x	20x200 mm battery rings
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	SE Ring 330 mm (4 pcs)
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Conector Servo female 4 pines
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Round Rod 6,0x1000 mm
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Universal Colour Paste white 50 g
1 x	Strip 2,5x1,25x330 mm
1 x	Paint gun for sprays
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	CC 03
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Bungee HLG Premium
2 x	Glases Stratus
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	30 cm BEC cable (female)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Glases Flitemaster
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Cabel charger transmitter GRAUPNER
1 x	CC 02
1 x	4 LiPo XH>EH adapter
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Servo mounting frame SV-1260MG
1 x	T-Motor U7-V2.0 Kv420
2 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Blind nut M6 (4 pcs)
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Threaded insert M3 (4 pcs)
1 x	Lock nut M6 (10 pcs)
1 x	Blind nut M4 (4 pcs)
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Blind nut M6 (4 pcs)
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Straightened threaded rod M3 - 1m
1 x	Nut for mounting M6 (4 pcs)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Blind nut M2 (10 pcs)
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Nut for mounting M3 (10 pcs)
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Pine wood slat 10x10x1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Blind nut M8 (10 pcs)
1 x	Blind nut M5 (10 pcs)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Hexagonal Nut M4 (10 pcs)
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Lock nut M5 (20 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Threaded insert M5 (10 pcs)
1 x	Nut for mounting M3 (4 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	Hexagonal Nut M1,6 (10 pcs)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Nut for mounting M5 (4 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Extension 5 lipos JST - JST/C
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	USB HLS prog. interface
1 x	Glases Ace
1 x	JETImodel Addcap 1640

5,784.43EUR