119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor DLE 200cc Premium Muffler
1 x Small Crow DLE-170M
1 x Motor DLE 170 M- Paramotors
1 x Motor DLE 430 cc - Paramotors
1 x Silent-blocks DLE 170M
2 x Opale Rucksack
1 x Parachute BACKUP X100
1 x Parachute PV6 for F3J
1 x Paramotor BackPack XXS (without accessories)
1 x Windsock Ozone L -1200 mm
2 x Para-RC Mix
1 x Motor DLE 200cc Std
1 x ABS tube 14.0x10.0x1000 mm
1 x Support XT60 conector (2 pcs)
2 x Buy Perforated film 100 cm / 10 m
1 x Double conector with JR adapter and 200 mm extension
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Ferrita 17x10x6.5 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Ring 320 mm length (5 pcs)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x 20 g tin paste
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Cabel charger transmitter GRAUPNER
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Set cintas unión paracaídas 145 cm
1 x ABS tube 4.0x3.0x1000 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x ABS tube 3.0x2.0x330 mm
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x Aramid 50 daN 50 m
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Black large kwik link (10 pcs)
2 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Adapter lead MPX/XT60
1 x ABS tube 7.0x5.0x1000 mm
1 x Paramotor Trike XL
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Tape GFK 25 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Straightened threaded rod M3 - 1m
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x MAX pilot ARTF
1 x ABS tube 5.0x4.0x1000 mm
1 x Horn 5/15 with M2 Bearing
1 x 4 mm M3 red control terminal (4 pcs)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Xoar Electric Beechwood Prop 20x10
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Rescue 1,8m2 / BackPack
1 x 9x4.7 * 22x12 carbon propeller
1 x Universal Colour Paste deep black 250 g
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x CC 03
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x Horn with ball 40x30
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Dean "T" - Futaba Adapter
1 x SE Ring 200 mm (2 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Ferrita 14x8x5.5 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Spray EC Red 400ml
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x ABS tube 8.0x6.0x1000 mm
1 x Spannlack 1000 ml
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x CM-3
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x CC 02
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Small aluminium horn red (2pcs)
1 x 1000 ml sealer (DOPE)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Connector Sub-D 2+5 Male
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Support pump Xicoy X45
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ballast 700gr OPALE
2 x ABS 500 x 400 x 0,5 mm (white)
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Recessed MPX connector support (6 pcs)
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Support Pitot JETI
1 x Paint gun for sprays
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Circlick securite
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Wing OXY 5,0 m2
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Propeller electric carbon 8.5x6
1 x Propeller electric carbon 10x7
1 x Propeller APC 13x6.5 Electric
1 x 
1 x Propeller electric carbon 10.5x8
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Digital precision scale up to 2000 g
1 x 2,0x50 mm allen screwdriver
1 x BALSA trip 10x10x1000 mm
1 x Propeller APC 10x6 Electric
1 x Miniature brass strap hinge, 1 m
1 x Dremel PERMAGRIT thin lime
1 x 15x7 tree blades propeller
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x Oracover Azul Cielo 2 m
1 x Angle measurer
1 x Oracover CARBON Metalic 1 m
1 x Truck-trailer for gliders 720 x 239 mm
1 x Oracover Azul 2 m
1 x Field folding model stand
1 x Oracover CHROME 2m
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Universal batery Tester
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Vasa model Catapult
1 x Propeller 9x7 SlowFlyer
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Rubber bushing with bracket "B" type (2 pcs)
1 x MEKP Harderner 100 g
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Couple M4 for wire (10 pcs)
1 x Battery bed V2_S (black)
1 x Propeller APC 10x5 Electric Pusher
1 x FALCON 33X11W CARBON PROPELLER (GAS)
1 x FALCON 27X11 CARBON PROPELLER (GAS)
1 x FALCON 24X10 CARBON PROPELLER (GAS)
1 x Propeller APC 10x4 Glow/Gas
1 x FALCON 24X12 CARBON PROPELLER (GAS)
1 x Propeller APC 8x4 Glow/Gas
1 x Propeller KAVAN 32x12 2-Bl
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
18,940.03EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies