119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Para-RC "RC-Evo-Cross" Rescue
2 x Aramid 50 daN 50 m
2 x Paramotor Kit Camo H1.5/ Ben Red
2 x Para-RC Mix
2 x Set cintas unión paracaídas 145 cm
1 x Paramotor BackPack XXS 2
2 x Parachute PV6 for F3J
2 x Paramotor Trike XL
2 x MAX pilot ARTF
2 x Ballast 700gr OPALE
2 x LUCAS pilot ARTF
2 x Paramotor BackPack XXS (without accessories)
2 x Trike XL motor set (motor+esc+prop)
2 x Windsock Ozone L -1200 mm
1 x Copier 2x20 cm pcs
1 x Vacuum pump P1-N
1 x Copier 5x20 cm pcs
1 x Cut tube
1 x 1,5x50 mm allen screwdriver
1 x Starter EM Gear Power 250
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Starter EM Gear Power 80
1 x Digital precision scale up to 2000 g
1 x 3,0x60 mm allen screwdriver
1 x Starter Sullivan-STAR 603 DINATRON
2 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Screwdriver for Hexagon 1,27mm
1 x Motor A2212/13T
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x AX-60 starters (5 pcs)
1 x Pine wood slat 3.0x10.0x1000 mm
1 x 800TVL CMOS camera for FPV
1 x ABS tube 9.0x7.0x1000 mm
2 x Aluminium wide washer M4 Black (4 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Digital scale up to 40 kg
1 x Screwdriver for Torx® TX6
1 x Dust collector for mould cleaning
1 x Vacuum pump 12 CFM
1 x Digital weight, angle and balance meter BASIC
1 x Crimping tool
1 x Sealing Iron Sleeve PROF
1 x EC-Cutter
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Fresa corte diamante Ø 2.7mm (bola)
1 x Rubber Insert hard, 1 Pcs.
2 x Kwik link unmount tool
1 x Concave-Convex sandpaper file 13 mm
2 x Welder 100W/200V
1 x PERMAGRIT Sanding Block 45° 140x51 mm
1 x Roller cutter 28 mm
1 x Fabric scissors curved Premium, 16 cm / 6" length
2 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Pistola termica MH 550 micro
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x Connector CAN 15
1 x Connector Sub-D 2+5 Female
1 x 10x7 tree blades propeller
1 x 16x10 tree blades propeller Master Airscrew
1 x 3.2 mm Prop Adapter M8
1 x 2,3 mm Prop Adapter M6
1 x 14 mm Portholes for screws (10 pcs)
1 x 12x8 tree blades propeller
1 x 300x4 mm M4 shaft ship
1 x Sanyo RX Battery Eneloop 4,8 V JR
1 x Suncover 100cc Red
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Double conector with JR adapter and 200 mm extension
1 x Parachute BACKUP X100
1 x Pump hose (Ø 6/8 mm) transparent
1 x Tachometer HANGAR 9 digital
1 x Propeller APC 10x4.5 MR
1 x Xoar Electric Beechwood Prop 21x10
1 x Propeller APC 12x10 Glow/Gas
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x DUPLEX TGs 2,4 GHz (transmitter module)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x 40 mm gas motor standoff
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x 50 mm gas motor standoff
1 x aluminium servo arm V2-JR 2,0 inch M3
1 x Aluminium battery holder red
1 x 6 mm Quick clamp_S (10 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x DPS Switch JR/JR
1 x 39,0 mm propeller (left propeller)
1 x Spare white 38-45 mm spinner
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Screws 2,2 x 6,5 mm (20 pcs)
1 x Ply-Span 450x600/13g Yellow
1 x 5 mm Prop Adapter CN-Spinner
1 x 39,0 mm propeller (rigth propeller)
1 x Spinner black 36-38 mm
1 x 4 mm Prop Adapter M6
1 x 6 mm Prop Adapter M8
1 x 6x4 tree blades propeller
1 x Vasa model Catapult
1 x Parachute P4
1 x Wing OXY 0,5 pulgadas2
1 x Para-RC Trike "RC-Bullix"
1 x Opale Rucksack
1 x Wing OXY 5,0 m2
1 x Windsock Ozone L - 700 mm
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Ball Link Plier
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E
1 x Z Bender - S Type Tool
1 x Propeller FIALA 15x8 3-Blade
1 x FIALA Propeller 19x12 Electric
1 x FIALA Propeller 23x8 Electric
1 x Propeller APC 11x3.8 SF
1 x T-Motor U7-V2.0 Kv420
1 x Propeller APC 10x4.7 SF Pusher
1 x Propeller APC 10x4 Glow/Gas
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x Sensor DUPLEX 2.4EX MUI 200
1 x DUPLEX MUI 50 Sensor
1 x Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x DUPLEX 2,4GHz MRPM EX
1 x DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x AddCAP 10AS capacitors
1 x DUPLEX 2.4GHz GPS
1 x DUPLEX 2.4EX Expander E4
1 x DUPLEX 2.4EX RC Power Switch 10
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Aluminium ignition bad (blue)
1 x 15 mm floating pad (30 pcs)
1 x 30 mm gas motor standoff
1 x Aluminium ignition bad (red)
1 x 45 mm gas motor standoff
1 x Aluminium wide washer M4 Red (4 pcs)
1 x 11 mm Rubber pads (14 pcs)
1 x 20 mm gas motor standoff
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x 10 mm Quick clamp_L (6 pcs)
1 x 10 mm floating pad (72 pcs)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Cabling for Fox MDM1 wings
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x NF-3X-350 set
1 x CC 05
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 4 LiPo XH>EH adapter
1 x 3 LiPo XH>EH adapter
1 x CC 03
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x CC 02
1 x Connector Sub-D 2+5 Male
1 x Black copper lacquer wire Ø0,2 mm (5 m)
14,435.43EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies